Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

OT Fixing a hydraulic jack?

Posts

OT Fixing a hydraulic jack?

#1

OT Fixing a hydraulic jack?

Barry Irby

>I have three cheap jacks that I bought years ago. They are 5 ton hydraulic bottle jacks. One of them seems to work like new, one has a limited range of motion and the other does nothing at all.

I suspect the fluid has leaked out over the years. Is it possible to add fluid? What would I use? Would I pour it in through the little hole where the "knob" is? I see this as I can't break something that is already broken. If I can't find a simple fix, they are going in the trash.

Re: OT Fixing a hydraulic jack?

#2

Hydralic Jack oil

Phil Joines Krum, TX

>larger auto parts stores have it. There should be a filler hole near the botton, sometimes with a square heared plug, sometimes rubber. Can't advise on how much to use.

Re: OT Fixing a hydraulic jack?

#3

Look for a screw halfway up the side...

John in New Mexico

>Thats usually where the oil goes - far as I know anyhow. Somewhere I've got an old bottle of hydraulic jack oil, could be a special product, but maybe any hydraulic oil would work (specially if you don't care to much about the results). Somewhere I've got a bookmark with lots of info about bottle jacks - the high-lift type won't work on my bigger truck so I was looking for a 12 ton last year. Ironically, I took my old 5 ton hydraulic to a place to have it rebuilt - since its a nice old american made jack, and they said "we don't do that anymore, but if you want to buy one, we've got a couple rebuilds left over from the previous managemnet". So I got a 12 ton Hein-Warner for $20 :). One day I'll get the 5 ton fixed too (same brand).

John