Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Large old bandsaw - ID needed...

Posts

Large old bandsaw - ID needed...

#1

Large old bandsaw - ID needed...

John Aniano - in NJ...

>Hello Folks,

Any of the old power tool experts out there recognize this bandsaw? Who made it? When? I'm guessing ~1900 or so. No names on the castings - I looked. The main bearings appear to be brass or bronze, not babbit. Of course, there appear to be no blade guards...

My neighbor just bought it and wants to restore and ultimately use it. Any thoughts? Any books he should get to better know what he should do and how to proceed?

Thanks.


img

Re: Large old bandsaw - ID needed...

#2

Large old bandsaw - image of back... 

John Aniano - in NJ...

>


img

Re: Large old bandsaw - ID needed...

#3

Re: Large old bandsaw - image of back...

Martin from Granbury

>That looks like one I saw in David Lamb's shop. If you can get in touch with him, perhaps he can ID it for you.

His contact information can be found here:

http://www.furnituremasters.org/artists.cfm?ID=11

Re: Large old bandsaw - ID needed...

#4

Re: Large old bandsaw - ID needed...

Rob Stokes in North Vancouver

>that's a beauty!

Send your friend over to http://www.owwm.org - there's answers waiting.

Rob

Re: Large old bandsaw - ID needed...

#5

Now THAT is cool!!!!!

MaxM

>

Re: Large old bandsaw - ID needed...

#6

Re: Large old bandsaw - ID needed... *LINK*

Mike L (Orange County, CA)

>To my knowledge, that round tubular frame is not common, therefore making IDing a bit easier. My guess is it's made by Charles E. Wright Co.

Regards,

Mike


C.E.Wright

Re: Large old bandsaw - ID needed...

#7

If I had to replace all my tools.....

Mark Goodall - ATL - tooljunkie

>If I had to replace all my tools and could only have one.... that would be it!

Happy Woodworking!