Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

question about woodstove

Posts

question about woodstove

#1

question about woodstove

Peter Galbert

>I have a homemade woodburner made from a 50 gallon drum that I use outside to boil down maple syrup. I want to some sort of insulation on the inside to help contain the heat. Fire bricks are expensive (the whole point of backyard syrup making is to be cheap!) so I was wondering about using some sort of fireplace mortar or some other cement, any ideas or experience?

Re: question about woodstove

#2

Re: question about woodstove

Paul in NJ

>You can mix perlite or vermiculite with cement to make a light weight insulating mortar. You will have to play around with the portions to make it sticky enough. I think you'll have to dry it slowly. Sorry I can't be more specific. Have you lokked at blacksmith/forge sites?

Paul Dzioba

Re: question about woodstove

#3

Re: question about woodstove

r payne

>There are castable refractories or blanket that may work. But I think anything will wind up being expensive unless you can split with someone.

Check with iforgeiron.com

especially the blueprints section for ideas.

ron

Re: question about woodstove

#4

Re: question about woodstove

Curly Smith

>You might try searching metal casting and pottery sites for a fire brick recipe. However, it's a fair bit of work and it will take some experimentation.

I'm a bit unclear as to what you intend so this may be a useless suggestion - have you considered adding a large ring around your barrel and filling it with dirt? Good old dirt is a good insulator and it's, wait for it, dirt cheap. You could, of course, do something similar on the inside if you have enough room and some way to contain the soil (or rocks, bricks, etc).

This site has info on thermal blankets that might provide some useful info: http://www.agismfg.com/html/other_prod.html