Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Dumb Question--- band saw blade lube?

Posts

Dumb Question--- band saw blade lube?

#1

Dumb Question--- band saw blade lube?

Dave Morris

>Admittedly, I don't have any experience with bandsaw use other than a tiny Delta benchtop saw. It was a safety award from work (Gee, thanks... do I really have to take it?), and the source of more cussing that almost anything I've ever owned. Totally unusable for even the smallest project, the blade refused to track properly, and the saw was under powered, to say the least.

So now I gots me a 14" bandsaw, and I'm ready to broaden my horizon. I keep hearing about blade lube. Searching didn't really give a good answer other than "I use it" responses and the like. What is the stuff, and why does a bandsaw need it? Does it affect the wood at all? I'm assuming it's not silicone or oil based, as contact with these materials would affect glue-up and finishing the wood.

Dave-- who's never seen the stuff carried at a local store, nor talked in person to anyone who's used it

Re: Dumb Question--- band saw blade lube?

#2

For metal cutting?

John in New Mexico

>I've seen it used on metal cutting bandsaws. Can't imagine what good it would do cutting wood.

Re: Dumb Question--- band saw blade lube?

#3

Re: For metal cutting?

Falberg saw Co

>Blade lube keeps the wood sap from sticking to your guide rollers. Timber framers use "PAM" (or its generic equivalent) from the local grocery store because it doesn't affect the finishability of the wood. It reportedly prolongs the life of blades by running cooler and reducing friction on the teeth. I like it for all the above reasons. A little spritz now and then goes a long way.

Re: Dumb Question--- band saw blade lube?

#4

Re: Dumb Question--- band saw blade lube?

Jim Dillon

>Dave,

I think Iturra Design carries the Lenox brand blade lube. I don't have my catalog handy to check and they do not have a web site. Their telephone number is 888-722-7078. Their catalog is well worth getting. The lube comes in a big tube that will last a lifetime. It seems to help; I also use if for screws. I haven't noticed any problems with it as far as finishing goes, but then usually there are a lot of woodworking steps between the bandsaw cut and the finish step. Good luck with your new bandsaw and I hope this helps.

Jim

Re: Dumb Question--- band saw blade lube?

#5

Re: Dumb Question--- band saw blade lube?

Jesse in New Mexico

>Here's a link to a product Woodcraft carries:

http://www.woodcraft.com/family.aspx?familyid=4817

Olsen also makes something similar. I know of people who swear by it, but personally I tried it and couldn't see any difference....

Re: Dumb Question--- band saw blade lube?

#6

Never use it for cutting wood

Brian Hahn in SW Wisconsin

>I've never used it and I've never seen a need to use a lube on the blade. I cut a lot of green wood and if the blade isn't sharp, it will tend to clog up. When that happens, I just take a few minutes and sharpen the blade. I just retired an Olson blade that I'd sharpened 70 times. That seems like pretty good blade life to me.

Some people like PAM (from the grocery store), but I've never tried it.

Re: Dumb Question--- band saw blade lube?

#7

Re: For metal cutting?

Art Liebeskind

>This is a good person to heed. He really knows bandsaws. If he says PAM, use PAM.

Art LIebeskind

Re: Dumb Question--- band saw blade lube?

#8

Sealing Wax & a 6 TPI Band will cut

Garrett in Victoria BC

>aluminum plate like wood and won't load up.

I just sawed a bunch of parts this way and it was a cinch.

Cheer, Garrett


img

Re: Dumb Question--- band saw blade lube?

#9

Iturra

Dave Morris

>Thanks Jim for the info. I talked to Louis last week, got the Spinner 3 tension crank from him (man, that's swee-eeet!). Their new catalog should be coming out in a couple/few weeks, I'm already on the list for one. Can't wait to give it a good perusing. ;-)

Dave--- who has a can of old Johnson paste wax set aside specifically for lubricating wood screws and TS/Jointer(and now BS) table rust prevention

Re: Dumb Question--- band saw blade lube?

#10

Thanks all...

Dave Morris

>..for the info. I'd seen the Olson wax stick on the net, and heard of some type of "spray-on" stuff (Pam? Who'da thunk it?), but couldn't see how anything that would "lube" the blade and last longer than 5 seconds wouldn't also transfer to the wood and/or bandsaw wheel.

Dave--- filing another tidbit of info gleaned from Woodcentral

Re: Dumb Question--- band saw blade lube?

#11

Re: Thanks all...

Keith Newton

>I keep a block of paraffin sitting on the edge of the table of my big bs. This saw sees a lot of use cutting thick cuts, up to 16". You can get canning paraffin at any good grocery store. Just touch it to both sides while it is running.

It stays on good, and doesn't attract dust. Also comes in handy for lots of other metal to metal, or wood applications around the shop and home, like TS sled runners, on down to door strikers that want to bang, rather than slip up the plate like they are suppose to.