Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Silky handsaws *LINK*

Posts

Silky handsaws *LINK*

#1

Silky handsaws *LINK*

Tom Dunlap

>For many years I've used Silky handsaws and polesaws for pruning trees. They are the standard that all of the rest of the saws are measured from. Most other saws come up very distant seconds...in my opinion :)

How do their woodworking saws measure up against the rest of the market?


Silky Saws

Re: Silky handsaws *LINK*

#2

JL

Re: Silky handsaws

JL

>I've got the Silky Kenzo Ryoba saw. I really like it. It's much better than the Irwin saw that I started out with :). It was a very nice gift from a friend.

Re: Silky handsaws *LINK*

#4

That's a thick saw

Denis Ch�nard, Orl�ans, Ont.

>My Rip dozuki has a 0.015" kerf, and my crosscut 0.018".

I've come to really appreciate thin kerfs... The saw you mention is on par with a LN dovetail saw. Some like it, but I don't care for the saw and its thick kerf. Matter of opinion, I guess...

DC

Re: Silky handsaws *LINK*

#5

Re: Silky handsaws

Martin from Granbury

>I have a Woodboy, and I like it a lot. I tried one before I bought it. It is much easier to start than my Adria, when cutting tails and pins. However, when cutting half blind pins, it does not start well on the 45 degree angle, so I use the Adria for that. Does that make sense?

One note, it cannot be resharpened, due to its double tooth design.

Re: Silky handsaws *LINK*

#6

Everything has a place...

HC Sakman

>Despite its thick kerf, this saw has it's place just because it has almost no set. It's one of my eleven Japanese saws. Depending on the wood, joint and other variable factors, it's a worthy saw IMO.

Chico...

Re: Silky handsaws *LINK*

#7

Can you define "almost no set"?

Denis Ch�nard, Orl�ans, Ont.

>My LN DT saw is sold with 0.006" overall set, and my rip Dozuki has 0.004".

Eleven saws? I got some catching up to do... :-)

DC

Re: Silky handsaws *LINK*

#8

Cannot be resharpened?

Jay Kilpatrick in TX

>Martin,

Just a question, is it really 'cannot be resharpened', or is it 'only can be resharpened by someone skilled enough to do it'? I mean, they are sharpened before they get to us, and I've seen the special files used to service Japanese saws (feather or some such), so what makes the double tooth design impossible to resharpen. As reference, I am a eastern/pull cut saw style luddite. So it is just an academic question for me.

Thanks,

~Jay... take out "remove" to email

Re: Silky handsaws *LINK*

#9

Simple...

HC Sakman

>It can work like a flush cutting saw, without scratching the adjacent surface.

Chico...