Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Cremation Casket

Posts

Cremation Casket

#1

Cremation Casket

Paul Regan

>I am a daily lurker here and a rare poster, but there is a request coming my way from a family member that has me stumped. I hope you folks help.

I just found out that an Aunt is planning to ask me to build a box to hold her ashes after she is gone. She is looking for a pine box and I think that she would like something simple, but not too plain.

I am happy to do it, but I have no idea how big the box should be, of if there are any special considerations that this use requires. Has anyone here built one of these? Any pictures you are to share?

I have to act surprised when she asks because I am not supposed to know. Boy, was I grateful for the advanced word.

Thanks for any help/advise you care to offer.

Paul

Re: Cremation Casket

#2

Re: Cremation Casket

Mark Kauder, Phenix City, AL

>Help me here guys. Isn't it something like one cubic centimeter per pound of weight of the body?

Mark

Re: Cremation Casket

#3

Dale Lenz

Re: Cremation Casket

Dale Lenz

>Most urns have 6" cubed inside. Sorry about your Aunt. Search to check this out, for sure.

Re: Cremation Casket

#4

Re: Cremation Casket

Ernie Miller

>I made one for my dad it was about 6"X9"12"~ I didn't measure and it was just barely big enough yo hold the ashes. he was a big man so that makes a differance it was Walnut and curley maple the Walnut came from a family farm Maple was form Dave Smith. hand cut DT joints top slid in Rabits and it pined shut when a dowell was glued in place.


img

Re: Cremation Casket

#5

Call your local crematory

Ray Thompson - Middletown,IN

>Best place to get an answer.

Ray

Re: Cremation Casket

#6

Re: Cremation Casket

Paul Regan

>Thank you all for the responses. Good advice and I will be sure to follow it.

My Aunt is in her 70�s and in good health as far as I know. This is her way of planning for the future and not being a burden for those left behind. She also has a strong personality and a pretty good sense of humor so I expect the design part of this project to be interesting. I am actually kind of honored that she wants me to do it.

Thanks again for your help.

Paul

Re: Cremation Casket

#7

I made one for my father

Michael Dresdner

>My mother asked for it after he was cremated, so I had the exact measurements of the cardboard box the funeral home gave her. In general, though the gent told me to figure the ashes will be about the size of a five pound bag of sugar. I'd post a picture but I don't know how. (When I tried, I got a 'graphic too large' message)

Re: Cremation Casket

#8

Re: Cremation Casket

Tom

>I've made them for my aunt and my father in the last several years. I went with plain cherry in a rectangular prism. All 6 faces were mitered, so it appeared to be seamless when finished. Cherry is, IMHO, beautiful just plain. The crematory staff remarked about them. It was suggested that that would be a fairly lucrative side business (if you've priced urns, you've seen why). My dimensions were both 8x8x12, and that was dictated by the size of the receptacle at the mausoleum and cemetery. That will be the deciding factory.

A side funny (funnier now than when it occurred). I believe I posted here at one time asking about the need for some sort of a pressure relief hole in the urn. I was worried about the air inside and the temperature changes it would go through. I didn't want any kind of cracking or, god forbid, a minor dusty explosion. I don't remember what the responses were, and I really don't think it was necessary. But I drilled a tiny hole in them anyway:)

Re: Cremation Casket

#9

Re: I'm going through this right now.

Al Crandall (N.E. of Indy)

>Wife's friend is waiting to be placed in a turned wood urn I'm making for her at the request of her children. I have contacted the funeral home which cremated her. General rule of thumb is 1 cubic inch per pound. The tempory plastic box which the home supplies is 6x10x4 or 240 cubic inches minus a small amount for wall thickness. In researching round urns, I notice that the majority of them are 200 to 220 c.i. The home said that about twice a year they have ashes which won't fit in their tempory box. The remains are mostly small bone fragments and the dried minerals from the body. All organic matter has been consumed. The prototype urn which I turned measured about 203 c.i. so I am going with that.

Re: Cremation Casket

#10

Re: Cremation Casket

Stuart Johnson

>Mark, From what I've looked into it is 1 cubic inch per pound. FWIW, one cup is a little over 14 cubic inches. I think Bill Grumbine measured by using cups of rice.

Re: Cremation Casket

#11

I have a stainless steel one used in a crematorium

Keith Newton

>it is 212 cu. in. A gallon is 231 cu. in.

This may be bigger than a small person, but extra space should not be a problem.

If you have a good photo of her, someone with a wood burning laser might be able to do her portrait on it, or any other favorite photo.

Re: Cremation Casket

#12

email it to me

Dan Donaldson

>I will fix the size and send it back to you.

Re: Cremation Casket

#13

Re: Cremation Casket

Angus Barclay, in New Zealand

>Your aunt really is honoring you with such a wonderful request.

Based on the size of the box for my son's ashes, if you allow one cubic inch per pound of bodyweight there will be enough room.

regards

Angus Barclay

Re: Cremation Casket

#14

Here's one I made

Michael Dresdner

>The box appears to be hanging from the long rod and floats so that the box bottom is an inch above the surface on which the box sits. The box is attached to its vertical posts, which act as feet, with hidden hardware, and a tiny black washer spaces them from the sides of the box so it looks as if the whole box is floating with no visible means of support. The long top bar slides between the vertical posts and when you pull on it, the lid lifts. It is a very snug fit, though, and will not lift easily. The ashes are in another sealed box inside. This box's interior dimensions were fitted around the interior box.


img

Re: Cremation Casket

#15

Here is another angle

Michael Dresdner

>This one shows the interface between box and verticals better.


img

Re: Cremation Casket

#16

Re: Cremation Casket

Ronald

>I just built one for myself. inside is 7 and 1/2 inches long and 5 inches wide and 7 and 1/2 tall. I got the measurements from my dad's. We put his ashes in it in late September this year. Good Luck!!!!

Re: Cremation Casket

#18

Very attractive, Michael.

Don Henthorn

>

Re: Cremation Casket

#19

Re: Cremation Casket

Ron Goldman

>If you want inspiration, Funeria has sponsored a series of exhibitions of art objeccts to hold ashes. They are opening a gallery in Sonoma County, CA. You can visit their web site: http://www.funeria.com/