Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

nova 3000/dvr

Posts

nova 3000/dvr

#1

nova 3000/dvr

Tony

>Hi, looking for either or a Nova 3000 or a DVR. I had thought there might be some "left over" DVR's now that the DVR XP is out, but can't find anything.

Re: nova 3000/dvr

#2

Re: nova 3000/dvr

Bill Neddow

>KMS in Vancouver had four or five about a week ago. They ship all over North America and have a very good reputation. Check them at www.kmstools.com

Re: nova 3000/dvr

#3

Re: nova 3000/dvr

Barry Irby

>Check with Tim Geist, their North American service guy. He may have some and almost surely has some that have been rebuilt. I have dealt with him on some small issues and would not hesitate to buy a lathe from him and I think you will save a bundle.

Re: nova 3000/dvr

#4

Re: nova 3000/dvr

Claudia Hayward

>Barry, do you have a contact for Tim? I would like to get in touch with him too.

Thanks

Re: nova 3000/dvr

#5

Tim

Tony

>Tvgeistmfg@aol.com, 1-304-295-8166

but listen--I get first dibs, LOL!

Re: nova 3000/dvr

#6

Re: Tim

Tony

>forgot to say that he didn't know just what he had last week-midweek. I hadn't called him yet to see what he'd found.

Re: nova 3000/dvr

#7

Re: Tim

Tony

>I think I need a nap--he said if he had the 3000 it would be without a motor. So what's the best motor to add on?

Does anyone know how much the DVR headstock is? I can't find it anywhere.

Re: nova 3000/dvr

#8

Re: Tim

tek-Brunswick, Ohio

>I looked into getting one of the 3000 lathes from Tim. I ended up finding a decent deal on a used one, so I didn�t go that way. When I talked to Tim he said he could tell me what motor and controllers worked well with the 3000. I have a 1 horse D.C. motor and controller on mine. It works well, but if I had to do it again I would get at least a horse and a half motor. I've also heard that the A.C. variable speed motors have more H.P. at low RPMs. I think Tim can suggest suppliers for the motors also. A used lathe isn't a bad route to go if you can find a decent deal.

Tom

Re: nova 3000/dvr

#9

KMS

Garrett in Victoria

>I bought my DVR from KMS about 19 months ago. They sell it as a package with the Super Nova II Chuck. Good price and good people to deal with. Lots of related turning toys, too.

Re: nova 3000/dvr

#10

Re: nova 3000/dvr

Doug Bartos, Md

>Tony,

I'm not sure where you're located but you might try contact any WoodCraft stores that you may have in your vicinity or even call the national WoodCraft number. I know that they were trying to get rid of their DVR inventory so that they can bring in the DVR XP's. Back in December I was able to get one that they had in stock for $1400. They had it on the floor for quite a while but it was still new.

Like the others have mentioned, Tim Geist is great to work with and is very responsive. I love the DVR. It is very smooth and quiet and it really does make a difference it how your work turns out. The one that I got was actually manufactured in November of 2003 and had a 2003 version of the software. When you are negotiating on a machine, make sure you know this manufacture date. There should be a sticker on the back of the headstock that will have a final inspection date and signature. The card can be upgraded to the new XP card and that will allow for 5 preset speeds as well as a couple of other advantages. I haven't sprung for this yet but sometime in the next year I probably will. Tim also told me that switching the DVR to 220V adds torque to the low speeds. You wouldn't think that this would be the case but apparently the DVR motor is different than a normal motor and it really makes a difference. Tim has a kit for the 220 conversion also.

Good luck in your search and let us know how it turns out.

Doug

Re: nova 3000/dvr

#11

220 V

Jorge Castaneda

>Doug,

I am a pro woodworker and in my experience all tools have more power running at 220 v than when they run in 125 v

$0.02

Jorge