Hand Tools

Subject:
Side sharpening
Response To:
finger pressure... ()

Wiley Horne
I like side sharpening more and more, despite the arguments against (weakens edge0 by scoring). These arguments may or may not be practical issues—I haven’t noticed a problem.

But getting down to the current matter.....side sharpening avoids running the edge directly into grit or slurry. Should work well for back flattening to the edge.

I like Winston’s original thought about something ura-like on western chisels. I suspect, like Mike, that Dremel or the like would provide a more focused and controllable cut.

Wiley

Messages In This Thread

Creating a mini-ura with buffing wheel?
Re: Creating a mini-ura with buffing wheel?
Re: Creating a mini-ura with buffing wheel?
finger pressure...
Side sharpening
Re: Side sharpening
Re: Side sharpening
Ruler trick
in plane iron testing, I found two options..
Re: in plane iron testing, I found two options..
testing high angles..
side comment about planing in general..
I'll demonstrate thick sometime ..
Re: I'll demonstrate thick sometime ..
Re: I'll demonstrate thick sometime ..
Patience ...
I re-read the articles on COE
High benches and low benches
Re: High benches and low benches
This isn't a snarky response, by the way
Others who do ..
Re: Others who do ..
Re: Others who do ..
Re: Others who do ..
Where I am going....
by the way...
I risk offending a lot of people...
Re: Others who do ..
on the last bit...
One other case for effort...
Something precise.
Re: Initially flat
Rotary tool?
Re: Rotary tool?
Some context
Re: Some context
Re: Some context
A failed attempt *PIC*
Re: A failed attempt
Re: A failed attempt
this is a lie nielsen iron?
Stanley iron
Re: Stanley iron
Re: Stanley iron
Re: Stanley iron
Re: Stanley iron
That pretty much covers it...
Success with applying extra pressure near the edge *PIC*
Directed pressure and progressive work
Re: Success with applying extra pressure near the
Wear bevel *PIC*
Visual difference at the back edge of..
Re: Visual difference at the back edge of..
Sorry, I should've been more precise...
Mini-ura on a new Veritas blade *PIC*
Re: Mini-ura on a new Veritas blade
Re: Mini-ura on a new Veritas blade
Re: Mini-ura on a new Veritas blade
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081