Hand Tools
Subject:
Re: Interesting..Response To:
Interesting.. () Michael Todrin
I agree that it seems a major strength of the unicorn profile is the both its ability to strengthen a low bevel angle allowing for easy wood penetration and durability and the rapidity and repeatability of setup.
Additionally I concur that mortising is not the ideal place for the low bevel angle followed by buffing, however it did provide an intense wear environment.
Messages In This Thread
- Sharpening and buffing progression pictures *PIC*
- Re: Sharpening and buffing progression pictures
- Re: Sharpening and buffing progression pictures
- Thinking about establishing the Unicorn profile
- David & Winston
- Scratches from various compounds *PIC*
- these results will require some study
- The white stuff is...
- Re: The white stuff is...
- various compounds - difficult to judge
- Scratches from more compounds; buff vs stick *PIC*
- Re: Scratches from more compounds; buff vs stick
- great experiments
- Other Compounds
- great experiments
- The white stuff is...
- Calcined alumina *PIC*
- Profile pictures *PIC*
- Capturing the Unicorn Profile
- Angle near the edge *PIC*
- Thoughts on the data
- Angle near the edge *PIC*
- Comparative Profile Pictures
- Separate on the IH sorby chisels..
- Re: Sharpening and buffing progression pictures
- Re: Sharpening and buffing progression pictures
