Hand Tools
Subject:
Re: Some other things to tryResponse To:
Some other things to try () Michael Todrin
So I did just that with a plane blade and had no problem getting .001 shavings in cherry and could have gotten thinner if I fiddled with it more. Surface finish was of subjectively equal quality to a blade prepared more traditionally.
Messages In This Thread
- Sharpening and buffing progression pictures *PIC*
- Re: Sharpening and buffing progression pictures
- Re: Sharpening and buffing progression pictures
- Thinking about establishing the Unicorn profile
- David & Winston
- Scratches from various compounds *PIC*
- these results will require some study
- The white stuff is...
- Re: The white stuff is...
- various compounds - difficult to judge
- Re: various compounds - difficult to judge
- Thank you for experimenting
- looking forward to...
- Thank you for experimenting
- Re: various compounds - difficult to judge
- various compounds - difficult to judge
- Scratches from more compounds; buff vs stick *PIC*
- Re: Scratches from more compounds; buff vs stick
- great experiments
- Other Compounds
- great experiments
- The white stuff is...
- Calcined alumina *PIC*
- Profile pictures *PIC*
- Capturing the Unicorn Profile
- Angle near the edge *PIC*
- Thoughts on the data
- Angle near the edge *PIC*
- Comparative Profile Pictures
- Separate on the IH sorby chisels..
- Re: Sharpening and buffing progression pictures
- Re: Sharpening and buffing progression pictures