Hand Tools

Subject:
Interesting..
Response To:
Further Observations ()

David Weaver
..mortising is the one place that I don't really use the extent of buffing and lowering the bevel.

with mortise chisels, I just round the tip a little bit either by hand or with a buffer because the cutting of the mortise chisel isn't the bulk of the work - it's a narrow cut with a lot of holding wood on the side.

Plus, it's nice to ride the bevel (and lowering the bevel makes that a lot harder to do, and makes the levering out of the chips a lot harder).

I think there isn't enough additional edge support for mortising the way the unicorn profile is set up (and it would be hard to meet both conditions when prying or twisting is introduced, those being sharper feeling and longer lasting).

When I mention mortising planes (where I have posted below), it's a bit different as it's just mortising a large open cavity into a V. more like chopping than furniture mortises.

I do think there's probably a way to fish with a very small microbevel and get similar functionality, but the process (and the sharpness) is easier to control with a buffer.

Messages In This Thread

Sharpening and buffing progression pictures *PIC*
Re: Sharpening and buffing progression pictures
Re: Sharpening and buffing progression pictures
Re: Sharpening and buffing progression pictures
Re: Sharpening and buffing progression pictures
Suzuki Tool 4000
eek...expensive..
judging scratches
Re: Sharpening and buffing progression pictures
Thinking about establishing the Unicorn profile
Amen, Reverend
Re: Amen, Reverend
for testing plane blade durability..
Tormek
Clarification, please
Re: Clarification, please
Re: Clarification, please
Re: Clarification, please
Re: Clarification, please
Preparing a beading blade
Re: Preparing a beading blade
if the tormek had a higher speed leather wheel...
David & Winston
Re: David & Winston
Buffing wheel vs hard felt
Re: Buffing wheel vs hard felt
Re: Buffing wheel vs hard felt
Scratches from various compounds *PIC*
these results will require some study
The white stuff is...
Re: The white stuff is...
various compounds - difficult to judge
Re: various compounds - difficult to judge
Thank you for experimenting
looking forward to...
Further Observations
great work
Interesting..
Re: Interesting..
not sure I agree
Re: not sure I agree
Re: not sure I agree
Re: not sure I agree
I remember reading this...
Re: not sure I agree
Re: not sure I agree
Factory ground *PIC*
Re: Factory ground
Re: Factory ground 1816 *PIC*
Re: Factory ground 1816
Re: Factory ground 1816 *PIC*
Re: Factory ground 1816
blogger grind
Re: blogger grind *PIC*
you're still failing...
after you do your survey, you'll find
Marples catalog...
Some other things to try
I am anxious to try your suggestion *NM*
Re: Some other things to try
Re: Some other things to try
Re: Some other things to try
Scratches from more compounds; buff vs stick *PIC*
Re: Scratches from more compounds; buff vs stick
wait till you try...
great experiments
Re: great experiments *PIC*
Other Compounds
Re: Other Compounds *PIC*
Well! good work
partly my fault for voluminous posts..
Wooden planes
Re: Wooden planes
Re: Wooden planes
Re: Wooden planes
Re: Wooden planes
Re: Wooden planes
Thanks, Jon!!
Re: Wooden planes—Steve Voigt link *LINK*
hardness of iron oxide
Re: hardness of iron oxide
Google monster says
Red stuff
File in useless knowledge
Re: Other Compounds - reinventing the wheel...
will do...
Correction
Calcined alumina *PIC*
sounds like gunpowder...
Profile pictures *PIC*
Capturing the Unicorn Profile
Re: Capturing the Unicorn Profile
but, do I need to?
Outstanding work, Winston! *NM*
Re: Capturing the Unicorn Profile
Angle near the edge *PIC*
Re: Angle near the edge
Re: Angle near the edge
Re: Angle near the edge
This is a difficult thing to do precisely
Thoughts on the data
Re: Thoughts on the data
Scale of Image
Comparative Profile Pictures
I have never looked closely at...
Re: Comparative Profile Pictures
Re: Comparative Profile Pictures
Separate on the IH sorby chisels..
If the UK guys are correct...
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081