4 5 6 7 8 9 10

Hand Tools

Message Index

mortise chisel shape data *PIC*
One last plane method for bill
Details and an editorial
better read in summary
Re: better read in summary
sort of....
Questions
Re: Questions
one questionnot answered
this is unchanged...
by the way...
Durability Results of the not bill method
strop only uni
Re: How much is enough
Once you've done the buffer, you can...
Finish on Cast iron substrate for diamonds
cast plates...
Re: cast plates...
The significance
Angle?
about 45 degrees
more cake *PIC*
Re: strop only uni "yellowcake" & leather question
yellow compound product number
Re: strop only uni "yellowcake" & leather question
Why the interest in Strop-Only Unicorning?
strop vs. freehand
Re: strop vs. freehand
Re: strop vs. freehand
sorry to catch you guys in the net...
Re: strop vs. freehand
Re: strop vs. freehand
Unicorn takes first loss- feet planed
Re: Unicorn takes first loss- feet planed
yes, but...
correction and elaboration of back buffing
I can do a duration and feel ...
Factors PPA cares about
Re: Factors PPA cares about
hate to pee on the campfire..
more secrets....
buffing cap irons...
polishing
Re: polishing
While we are on cap iron angles
Re: polishing
reasonable, and...
cap iron polishing
friction may not be the right term...
as to the bright surface...
One last one - xhp planing rosewood...
one other picture...terminal shavings
Plinth design ideas
Re: Plinth design ideas
Re: Plinth design ideas
Thanks
Middle stone
Re: Middle stone
Re: Middle stone
Re: Middle stone
Re: Middle stone
Re: Middle stone
Sigma 6000 Power
shapton 5k
Re: shapton 5k
The progressions...
Re: soaking
That and context
Re: The progressions...
interesting!!
Friable means more mess...
Re: Friable means more mess...
Re: Middle stone
Video about using a buffer for sharpening
Re: Video about using a buffer for sharpening
Excellent, excellent video!! *NM*
Thanks, making it was a learning experience! *NM*
Re: Video about using a buffer for sharpening
My suggestion.....
Strop
Re: Strop
for some kind of buffing...
Re: Strop
two approaches
Thanks Winston. Very well done! *NM*
Absolutely superb, Winston!! *NM*
a video so well done..
needs reposting main board *NM*
Excellent video Winston, I might add one note,
Ax edges
Yes on files...
Thanks David and Bill, *LINK*
Great Video - Left a Burnniing Question
Re: Great Video - Left a Burnniing Question
Re: Great Video - Left a Burnniing Question
Eventually becomes an irrelevant question
Re: Eventually becomes an irrelevant question
Moxon vise *PIC*
how do the clamps work?
Re: how do the clamps work?
interesting. Thanks! *NM*
Butt-Insky here
Unicorn for plane blades *LINK*
long video, so...
Re: long video, so...
Re: long video, so...
Re: long video, so...
Re: long video, so...
Cr-Mn vs. Cr-V chisels *PIC*
Re: Cr-Mn vs. Cr-V chisels *PIC*
Re: Cr-Mn vs. Cr-V chisels
Schlieper *LINK*
felt wheels in the background!!
They are essentially identical
Thanks! *NM*
Re: Cr-Mn vs. Cr-V chisels
I've looked these up before...
Re: I've looked these up before...
If the alloy is different...
Note on Pfeil
The missing variable...
Re: Note on Pfeil
Thanks Warren. *NM*
Variables that change for chinese tools
Result: not good *PIC*
same experience
* ahem *
I'll take "Pop culture references"
farting through silk...
Agree...
More than one reason to buff the edge
I remember the tormek thing...
Re: Agree...
I was wrong about damage... *PIC*
Still bad after grinding it back *PIC*
it could be deeper...
Life’s too short
but something for nothing.... *PIC*
Yabbut
The most sensible conclusion...
Well,
Re: but something for nothing....
objective tests don't count :)
Heat treating
They overshot...
Reputable Dealers
Re: Reputable Dealers
Re: Desk put into service
Re: Desk put into service
Unicorn knife edges
Re: Unicorn knife edges
Re: Unicorn knife edges
Re: Unicorn knife edges
George should be....
i made a video - I'll post it. *NM*
Re: i made a video - I'll post it.
I could....
Re: I could....
When your videos are so bad...
Re: When your videos are so bad...
CCR, if it wasn't licensed! *NM*
Re: CCR, if it wasn't licensed!
Re: CCR, if it wasn't licensed!
could be...
Re: could be...
It's not a particularly great video...
Re: Unicorn knife edges
paper and felt and leather
I'd not tried a chisel before...
I have been doing it routinely
Re: Unicorn knife edges
Side comment about the buck knives...
Unicorn Party Tricks...Planing
Re: Unicorn Party Tricks...Planing
Re: Unicorn Party Tricks...Planing
Oooo....
Re: Unicorn Party Tricks...Planing
Re: Desk put into service
Re: Making deep mortises and paying attention
hah!!! *NM*
Re: Making deep mortises and paying attention
Another nifty behavior from pigstickers
Re: same geometry, different approach
Agree with John
Re: furniture mortises vs plane mortises etc
Re: furniture mortises vs plane mortises etc
incannel gouges
Re: incannel gouges
Re: incannel gouges
Re: incannel gouges
Re: incannel gouges
Re: incannel gouges
From Steve’s post just below:
guessing at efficiency..
Re: guessing at efficiency..
Re: furniture mortises vs plane mortises etc
Re: furniture mortises vs plane mortises etc *PIC*
Making (wider) panels
wider panels, match planing, & spring joints
Re: wider panels, match planing, & spring joints
Things that weren't obvious (to me)
Re: Mortise technique
I had this 'splained to me when starting out...
Re: I had this 'splained to me when starting out..
A sufficiently advanced technology...
Re: A sufficiently advanced technology...
Re: Terminology? *PIC*
P. S. With appreciation to Winston Chang
Photo resizer app
Re: Terminology?
Re: Terminology?
4 5 6 7 8 9 10
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081