35 36 37 38 39 40 41

Hand Tools

Message Index

Moxon vise *PIC*
how do the clamps work?
Re: how do the clamps work?
interesting. Thanks! *NM*
Unicorn for plane blades *LINK*
long video, so...
Re: long video, so...
Cr-Mn vs. Cr-V chisels *PIC*
Re: Cr-Mn vs. Cr-V chisels *PIC*
Re: Cr-Mn vs. Cr-V chisels
Schlieper *LINK*
felt wheels in the background!!
They are essentially identical
Thanks! *NM*
Re: Cr-Mn vs. Cr-V chisels
I've looked these up before...
Re: I've looked these up before...
If the alloy is different...
Note on Pfeil
The missing variable...
Result: not good *PIC*
same experience
* ahem *
I'll take "Pop culture references"
farting through silk...
Agree...
More than one reason to buff the edge
I remember the tormek thing...
Re: Agree...
I was wrong about damage... *PIC*
Unicorn knife edges
Re: Unicorn knife edges
Re: Unicorn knife edges
Re: Unicorn knife edges
George should be....
i made a video - I'll post it. *NM*
Re: i made a video - I'll post it.
I could....
Re: I could....
When your videos are so bad...
Re: When your videos are so bad...
CCR, if it wasn't licensed! *NM*
Re: CCR, if it wasn't licensed!
Re: CCR, if it wasn't licensed!
could be...
Re: could be...
It's not a particularly great video...
Re: Unicorn knife edges
paper and felt and leather
I'd not tried a chisel before...
I have been doing it routinely
Re: Unicorn knife edges
Side comment about the buck knives...
Unicorn Party Tricks...Planing
Re: Unicorn Party Tricks...Planing
Re: Unicorn Party Tricks...Planing
Oooo....
Re: Unicorn Party Tricks...Planing
Mortise technique
How to tie shoes...
Re: How to tie shoes...
passive aggressive....
Re: passive aggressive....
Re: passive aggressive....
Moxon
Difference for Cabinetmaking
Re: Moxon
Roubo *PIC*
Re: Roubo
Riding the bevel
Re: Riding the bevel
Re: Riding the bevel
Re: Riding the bevel
Re: Riding the bevel
Re: Terminology?
Folsanbee central ‘V’
Re: same geometry, different approach
Re: same geometry, different approach
Agree with John
Re: furniture mortises vs plane mortises etc
Re: furniture mortises vs plane mortises etc
incannel gouges
Re: incannel gouges
Re: incannel gouges
Re: incannel gouges
Re: incannel gouges
Re: incannel gouges
From Steve’s post just below:
guessing at efficiency..
Re: guessing at efficiency..
Re: furniture mortises vs plane mortises etc
Re: furniture mortises vs plane mortises etc *PIC*
Re: Terminology?
The flip...
Re: Terminology? *PIC*
P. S. With appreciation to Winston Chang
Photo resizer app
Re: Terminology?
Re: Terminology?
Re: Roubo
Re: Mortise technique
Re: Mortise technique
George Wilson would approve...
What mattered to clients...
Re: Mortise technique
Re: Factory?
Another nifty behavior from pigstickers
Re: Mortise technique - an observation...
your observations are correct...
Making deep mortises and paying attention
Re: Making deep mortises and paying attention
hah!!! *NM*
Re: Making deep mortises and paying attention
Re: Mortise technique
Desk put into service *PIC*
Re: Desk put into service
revealing the ash holes for you *PIC*
Thanks. Looks nice! *NM*
Re: Desk put into service
Re: Desk put into service
Re: Desk put into service
Beautiful! Love the Ash *NM*
Re: Desk put into service
Whatchoo talking out, Willis?
Re: Desk put into service
Re: Very nice Bill! *NM*
Re: Desk put into service
Re: Desk put into service
Re: Desk put into service
no chance
I had this 'splained to me when starting out...
Re: I had this 'splained to me when starting out..
A sufficiently advanced technology...
Re: A sufficiently advanced technology...
Re: Desk put into service
Re: Desk put into service
Re: Desk put into service
Wood ideas for Monticello book presses
Wide boards beside poplar and pine?
Unicorn content
Making (wider) panels
wider panels, match planing, & spring joints
Re: wider panels, match planing, & spring joints
Things that weren't obvious (to me)
Reputable Dealers
Re: Reputable Dealers
Re: Wood ideas for Monticello book presses
read only the first post...
Poplar
Re: Wood ideas for Monticello book presses
There is a Lowes
David, Nice work, but for anyone coming late
It's a spoof name...
Re: It's a spoof name...
The club tshirt
Re: The club tshirt
I love...
Re: I love...
Selling shirts would defray research expenses
Re: Selling shirts would defray research expenses
The tip of the horn
Couldn't resist... *PIC*
Re: It's a spoof name...
Re: It's a spoof name...
Re: It's a spoof name...
I voted (elsewhere)
Re: I voted (elsewhere)
It was a fanclub...
I divide my time... *PIC*
Re: I divide my time...
35 36 37 38 39 40 41
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081