1 2 3 4 5 6 7

Hand Tools

Message Index

plane stiffness *PIC*
Re: plane stiffness
Re: plane stiffness
testing a level plane...
Re: testing a level plane...
Question
Re: What's the big deal…
Been there and done that
Why certain sole profiles are important...
TL DR of the LN 62 from lunch
Thinking a little further on the cause...
The strange wear.. *PIC*
Re: The strange wear..
After the plane stopped entering cut.. *PIC*
A2 and Washita hate each other *PIC*
Re: A2 and Washita hate each other
Re: A2 and Washita hate each other
A2, austenite and Oashita particle size
Re: A2, austenite and Oashita particle size
Here's a SWAG...
I have a separate SWAG
short video in cocobolo test piece
Re: TL DR of the LN 62 from lunch
The LN Lapping process *PIC*
total time spent - 12 minutes
Re: total time spent - 12 minutes
Re: total time spent - 12 minutes
i like vixens, too...
LN 62 in house....
Re: pre-shipment in process part deux....
Fun's over for now
Re: Fun's over for now
0.0015” is LN flatness tolerance *NM*
Re: Fun's over for now
Re: Fun's over for now
Re: Fun's over for now
Concave vs. convex
Re: Concave vs. convex
Re: Concave vs. convex
Re: Concave vs. convex
Picture of the concavity *PIC*
Re: Picture of the concavity
Question from Practical Planning Anonymous
Re: Question from Practical Planning Anonymous
This doesn't...
Re: Question from Practical Planning Anonymous
Excellent!!
Re: Question from Practical Planning Anonymous
Re: Question from Practical Planning Anonymous
Re: Question from Practical Planning Anonymous
Followup Question from PPA
Re: Followup Question from PPA
Oh, and the other board
Re: Oh, and the other board
Edge jointing accuracy
I'll give you a simple case where this gets ..
I agree without reservation, with some questions
no
other outcome...
Way different with hand tools, by the way
Re: Followup Question from PPA
Re: Followup Question from PPA
Re: Followup Question from PPA
Re: Followup Question from PPA
Re: Followup Question from PPA
what you said...
Re: what you said...
Re: what you said...
Bevel up trials - stanley 18 -cocobolo
55 degree flat bevel *PIC*
62 degree flat bevel *PIC*
Unicorn tip on a 55 degree iron *PIC*
Bringing this back to earth with... *PIC*
Fun with a new plane
rabbet, shoulder, combo?
Re: rabbet, shoulder, combo?
Re: rabbet, shoulder, combo?
New approach to half blind dovetails *PIC*
Re: New approach to half blind dovetails
Or....
Good thing they weren't through dovetails!
halloween
Things about the same
Tying up loose polishes - Autosol *PIC*
Re: Tying up loose polishes - Autosol
Re: earwax stone pic
soft lower density vs...
crest complete (And more dursol) *PIC*
Re: crest complete (And more dursol)
Re: crest complete (And more dursol)
Re: crest complete (And more dursol)
Wrong R
separate, since you got caught in the net...
Re: separate, since you got caught in the net...
Re: separate, since you got caught in the net...
Re: separate, since you got caught in the net...
Greasy/Coated India Stone *PIC*
Re: Greasy/Coated India Stone *PIC*
Scratches from 5 micron and 1 micron buff compound *PIC*
A profound observation
Re: A profound observation
Re: A profound observation
Re: Scratches from 5 micron and 1 micron buff comp
Dent
worth the extra cost?
Re: worth the extra cost?
Re: worth the extra cost?
Re: worth the extra cost?
I have both...
Stanley #4 $30
PS c
Re: PS c
You may be disappointed
Re: worth the extra cost?
Re: worth the extra cost?
good suggestion, and what's.....
Re: worth the extra cost?
Unicorn Chisel Devours Stack of Drawer Dides *PIC*
Re: Unicorn Chisel Devours Stack of Drawer Dides
nonsense learned while experimenting
Creating a mini-ura with buffing wheel?
Re: Creating a mini-ura with buffing wheel?
Re: Creating a mini-ura with buffing wheel?
finger pressure...
Side sharpening
Re: Side sharpening
Re: Side sharpening
Ruler trick
in plane iron testing, I found two options..
Re: in plane iron testing, I found two options..
testing high angles..
side comment about planing in general..
I'll demonstrate thick sometime ..
Re: I'll demonstrate thick sometime ..
Re: I'll demonstrate thick sometime ..
Patience ...
I re-read the articles on COE
High benches and low benches
Re: High benches and low benches
This isn't a snarky response, by the way
Others who do ..
Re: Others who do ..
Re: Others who do ..
Re: Others who do ..
Where I am going....
by the way...
I risk offending a lot of people...
Re: Others who do ..
on the last bit...
One other case for effort...
Something precise.
Re: Initially flat
Rotary tool?
Re: Rotary tool?
Some context
Re: Some context
Re: Some context
A failed attempt *PIC*
Re: A failed attempt
Re: A failed attempt
this is a lie nielsen iron?
Stanley iron
Re: Stanley iron
Re: Stanley iron
Re: Stanley iron
Re: Stanley iron
That pretty much covers it...
Success with applying extra pressure near the edge *PIC*
Directed pressure and progressive work
Re: Success with applying extra pressure near the
Wear bevel *PIC*
Visual difference at the back edge of..
Re: Visual difference at the back edge of..
Sorry, I should've been more precise...
Mini-ura on a new Veritas blade *PIC*
Re: Mini-ura on a new Veritas blade
Re: Mini-ura on a new Veritas blade
Re: Mini-ura on a new Veritas blade
Elementary Question - charging a buffng wheel
Re: Elementary Question - charging a buffng wheel
Buffing objects vs. what we're doing..
Ditto
Re: Buffing objects vs. what we're doing..
Re: Buffing objects vs. what we're doing..
Re: Another Buffing Question
Re: Another Buffing Question
Re: Another Buffing Question
Re: How to Make a Big Green Mess
For the absurdly lazy...
Re: A Tip For the Absurdly Lazy...
Gray China (Guangxhi?) natural waterstone *PIC*
pic of the stone *PIC*
help re. Autosol posts
Re: help re. Autosol posts
Re: help re. Autosol posts
Altered states
Re: help re. Autosol posts
What direction to make scratches?
Re: What direction to make scratches?
A question about all the sharpened edge pictures
Re: A question about all the sharpened edge pictur
Re: Lots…
pretty much covers it...
Some notes *PIC*
Re: Some notes
Re: Some notes
Re: Some notes
The experience factor
Re: The experience factor
What the curators say vs. what they do
Re: What the curators say vs. what they do
I've been there four times...
clarfication
Re: clarfication
Re: clarfication
Brand New and Baroque Already
Re: The experience factor
Re: The experience factor
I'm sort of in the cants?
Re: I'm sort of in the cants?
The name is supposed to be yucky!!
Thanks
Japanese plane with linde buffing bar *PIC*
Is this what you mean...... *PIC*
Re: Is this what you mean......
Re: understood......
Re: understood......
That's clever
Re: I'm guilty....
Unicorn and Bevel Up
Re: Unicorn and Bevel Up
Re: Unicorn and Bevel Up
A test with bevel up planes, buffing, and tearout *PIC*
Re: A test with bevel up planes, buffing, and tear
Re: A test with bevel up planes, buffing, and tear
Re: Unicorn and Bevel Up
donkey ear
Re: donkey ear
NM. search found info.
Re: donkey ear
Re: donkey ear
Re: donkey ear
More versatile version *PIC*
Re: More versatile version
question
The fixture is by Robert Wearing. *NM*
Re: The fixture is by Robert Wearing.
NM: No need I got it thanks *NM*
Linde A - Paraffin Buffing Bar *PIC*
Picture of the "stone" *PIC*
Also with iron oxide bar
one other side benefit
Fine buffing compound
practically...
Try bee wax
Re: Picture of the stone
Re: Picture of the stone
Re: Picture of the stone
Re: Picture of the stone
two llyn idwalls
Re: two llyn idwalls
Re: testing linde A on SYP
Re: testing linde A on SYP
The winner...
Re: The winner...
Reminds me of the escher
Re: Reminds me of the escher
will do tomorrow...
Re: will do tomorrow...
Re: will do tomorrow...
Re: will do tomorrow...
1 2 3 4 5 6 7
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081