1 2 3 4 5 6 7

Hand Tools

Message Index

Octagonal Base for rock coffee table *PIC*
Re: Octagonal Base for rock coffee table
Re: Octagonal Base for rock coffee table
Re: Octagonal Base for rock coffee table
Re: Octagonal Base for rock coffee table
Re: Octagonal Base for rock coffee table
I'd like to know more the pigment too *NM*
Seems a shame to cover is up with a big rock *NM*
Re: Seems a shame to cover is up with a big rock
One last picture for reference...
see any faces?
Super dopper micrography... *PIC*
Of interest.......
Washita.....
What I see....
circles...
Re: circles...
Re: circles...
Re: Washita.....
Re: Washita.....
Re: Washita.....
why talking about washitas is confusing
bewildering pictures
Re: bewildering pictures
incannel or outcannel adze
Re: incannel or outcannel adze
Re: incannel or outcannel adze
The Need for Clarifying some Terminology
Re: The Need for Clarifying some Terminology
Needle movers
Re: The Need for Clarifying some Terminology
Unicorn go round, or, it works in turning as well
David Barnett
Re: David Barnett
Thanks for information on David
The effect of buffing like this...
Slips
Re: Slips
Re: Slips
Re: The effect of buffing like this...
Re: The effect of buffing like this...
Re: The effect of buffing like this...
Re: David Barnett
Want to know about sharpening carving tools?
Needlemovers
Do you think it is possible .......
Re: Do you think it is possible .......
Thanks Warren
Unilite Pictures for Bill
Re: Unilite Pictures for Bill
Re: Unilite Pictures for Bill
Re: Unilite Pictures for Bill
Unicorn-Lite on the back side
Re: Unicorn-Lite on the back side
Troll
I didn't remember who he was at first....
If I were a betting man
I think this guy is from germany
Netherlands
Fiction *PIC*
I think I remember you...
Re: I'm effing Nostradamus
Historical record exists...
Hi Nico, do you understand Needle movers
The trouble is...
"You can't get there from here..."
There is some history here.
Re: There is some history here.
(Message Deleted by Poster)
The parts that I remember
Re: The parts that I remember
One thing I will try not to do...
Clearance
I made a video yesterday....
Re: Clearance *PIC*
Re: Clearance
I'm lost
Re: I'm lost
Calling it Ruler Trick is out, I guess?
Re: Calling it Ruler Trick is out, I guess?
Re: Calling it Ruler Trick is out, I guess?
Re: Calling it Ruler Trick is out, I guess?
Re: Calling it Ruler Trick is out, I guess?
Re: Calling it Ruler Trick is out, I guess?
Re: Calling it Ruler Trick is out, I guess?
Re: Calling it Ruler Trick is out, I guess?
Re: Calling it Ruler Trick is out, I guess?
Re: Calling it Ruler Trick is out, I guess?
not a bad idea....
Re: not a bad idea....
Holy Cr&p, Batman!
Conventional wisdom and the backfire effect
Entertaining
Re: Entertaining
Re: Entertaining
Re: Conventional wisdom and the backfire effect
Slippery!!
Re: Conventional wisdom and the backfire effect
A distinction to be made...
Missed it...
Is this debate internal?
Re: Is this debate internal?
That is what management is for
Correct...
Re: Conventional wisdom and the backfire effect
Re: Conventional wisdom and the backfire effect
Re: Oh Darn
Information overload and tribal responses
Unicorn camping spatula (interlude) *PIC*
excellent!! *NM*
Great story
Spatula
Re: Spatula
Re: Spatula
Re: Spatula
Would you explain this a bit better
Re: Would you explain this a bit better *PIC*
Ooops, you meant the finger nail *PIC*
are you sure
No
Re: Unicorn camping spatula (interlude)
Re: Unicorn camping spatula (interlude)
Toomakers and the Unicorn Profile
Re: Toomakers and the Unicorn Profile
Re: Yet another chisel edge test
same as you, but less long...
mortise chisel shape data *PIC*
Re: mortise chisel shape data
Re: mortise chisel shape data
Re: mortise chisel shape data
One last plane method for bill
Details and an editorial
better read in summary
Re: better read in summary
sort of....
Questions
Re: Questions
one questionnot answered
this is unchanged...
Re: better read in summary
by the way...
Durability Results of the not bill method
Understanding the method....
Re: Understanding the method....
Re: Understanding the method....
That's correct.....pictures coming...
Clarification, Pictures for PPA *NM*
strop only uni
Re: How much is enough
Once you've done the buffer, you can...
Finish on Cast iron substrate for diamonds
cast plates...
Re: cast plates...
The significance
Angle?
about 45 degrees
more cake *PIC*
Re: strop only uni "yellowcake" & leather question
yellow compound product number
Re: strop only uni "yellowcake" & leather question
Why the interest in Strop-Only Unicorning?
strop vs. freehand
Re: strop vs. freehand
Re: strop vs. freehand
sorry to catch you guys in the net...
Re: strop vs. freehand
Re: strop vs. freehand
Unicorn takes first loss- feet planed
Re: Unicorn takes first loss- feet planed
yes, but...
correction and elaboration of back buffing
I can do a duration and feel ...
Factors PPA cares about
Re: Factors PPA cares about
hate to pee on the campfire..
more secrets....
buffing cap irons...
polishing
Re: polishing
While we are on cap iron angles
Re: polishing
reasonable, and...
cap iron polishing
friction may not be the right term...
that would be bad, consistent friction good *NM*
as to the bright surface...
One last one - xhp planing rosewood...
one other picture...terminal shavings
Plinth design ideas
Re: Plinth design ideas
Re: Plinth design ideas
Thanks
Solid top necessary?
Middle stone
Re: Middle stone
Re: Middle stone
Re: Middle stone
Re: Middle stone
Re: Middle stone
Sigma 6000 Power
shapton 5k
Re: shapton 5k
The progressions...
Re: soaking
That and context
Re: The progressions...
interesting!!
Friable means more mess...
Re: Friable means more mess...
Re: Middle stone
Video about using a buffer for sharpening
Re: Video about using a buffer for sharpening
Excellent, excellent video!! *NM*
Thanks, making it was a learning experience! *NM*
Re: Video about using a buffer for sharpening
My suggestion.....
Strop
Re: Strop
for some kind of buffing...
Re: Strop
two approaches
Thanks Winston. Very well done! *NM*
Absolutely superb, Winston!! *NM*
a video so well done..
needs reposting main board *NM*
Excellent video Winston, I might add one note,
Ax edges
Yes on files...
Thanks David and Bill, *LINK*
Great Video - Left a Burnniing Question
Re: Great Video - Left a Burnniing Question
Re: Great Video - Left a Burnniing Question
Eventually becomes an irrelevant question
Re: Eventually becomes an irrelevant question
Heat treating
They overshot...
Moxon vise *PIC*
how do the clamps work?
Re: how do the clamps work?
interesting. Thanks! *NM*
Butt-Insky here
Side comment about the buck knives...
Unicorn for plane blades *LINK*
long video, so...
Re: long video, so...
Re: long video, so...
Re: long video, so...
Re: long video, so...
Re: Unicorn knife edges
Result: not good *PIC*
same experience
* ahem *
I'll take "Pop culture references"
farting through silk...
Agree...
More than one reason to buff the edge
I remember the tormek thing...
Re: Agree...
I was wrong about damage... *PIC*
Still bad after grinding it back *PIC*
it could be deeper...
Life’s too short
but something for nothing.... *PIC*
Yabbut
The most sensible conclusion...
Well,
Re: but something for nothing....
objective tests don't count :)
Re: Cr-Mn vs. Cr-V chisels
I've looked these up before...
Re: I've looked these up before...
If the alloy is different...
Note on Pfeil
The missing variable...
Re: Note on Pfeil
Thanks Warren. *NM*
Variables that change for chinese tools
I'd not tried a chisel before...
They are essentially identical
Thanks! *NM*
Re: Cr-Mn vs. Cr-V chisels
Schlieper *LINK*
felt wheels in the background!!
Re: could be...
1 2 3 4 5 6 7
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081