Turning Archive

Subject:
Trapping plane *PIC*

JL
An interesting tool.
The piece on the lathe is down to 1". You can get down to about 3/8" or so. You can do a taper with it if you are careful.

If you want to do longer pieces you can.

Messages In This Thread

Trapping plane *PIC*
Re: Trapping plane
Re: Trapping plane
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081