Turning Archive
Subject:
Re: Vari-grind Response To:
Re: Vari-grind () Mike Brazeau
I have a T dresser and it never solved the bounce problem for me. I have a Delta slow speed with wheels as supplied and use the white wheel for gouges. Bought the Oneway single diamond dresser and it did the trick. I have enough of my wheels left to keep me turning for quite a few years so resisting the CBN wheels. Also have the Oneway balancing set but could not install when I tried it as I need additional machined washers for clearance and never get to calling Oneway. Live just over an hour from their plant in Stratford, so may make the trek one day. Good Mennonite pork shop on the way.
Messages In This Thread
- Wolverine/Vari grind help
- Re: Wolverine/Vari grind help
- Vari-grind basket height vs distance past jig?
- Re: Vari-grind basket height vs distance past jig?
- Re: Wolverine/Vari grind help
- https://youtu.be/5sTx5SbGDJI
- good instructions...
- Go to this page on Thompson Lathe Tools *LINK*
- Re: Wolverine/Vari grind help
- Vari-grind basket height vs distance past jig?
- Re: Wolverine/Vari grind help