Turning Archive

Subject:
Re: Wolverine/Vari grind help
Response To:
Wolverine/Vari grind help ()

George Balock
Robert,
Once you have the setting on the v-block set to match the nose angle, you move the arm on the Vari Grind to match the angle on the wings. It may take a little fiddling with it to get it right. As a little guide to see where you are grinding, you can take a marker and mark the wings on your gouge to see where the wheel is touching. Hope this helps.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081