1 2 3 4 5

Turning Archive

Topic
What's a woodturner-what do you say3/27/2015, 6:02 pm
Delicate Details *PIC*3/26/2015, 10:52 pm
Craig Lossing inspired piece *PIC*3/26/2015, 10:43 pm
NE end grain bowl *PIC*3/26/2015, 6:28 pm
What happened?3/26/2015, 1:27 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*3/25/2015, 6:17 pm
Finally *LINK*3/25/2015, 2:30 pm
Worms (larva)3/25/2015, 9:47 am
Peachtree handle on sale *LINK*3/24/2015, 10:01 am
[AD] Russian Olive Root Burl for Sale *PIC*3/24/2015, 1:19 am
Ugly Maple Tree hollow form *PIC*3/23/2015, 9:38 pm
Time To Help One of Our Own3/23/2015, 5:44 pm
Hey Mr. Grizzly/Roger Chandler *LINK*3/22/2015, 11:47 pm
"JC BENEFIT" , $232, Carl Powell3/22/2015, 5:21 pm
No Internet or hardly any3/22/2015, 6:44 am
JC Benefit another posting for WNers3/22/2015, 2:34 am
kudos to Jamie D3/21/2015, 11:21 pm
Plates *PIC*3/21/2015, 7:32 pm
JC Benefit--repost--$1523/21/2015, 6:09 pm
Impressive3/21/2015, 4:13 pm
$247 *NM*3/21/2015, 3:29 pm
JC Benefit posting for WNers3/21/2015, 2:11 pm
Stained Walnut *PIC*3/21/2015, 1:24 pm
Thanks for your generosity!3/21/2015, 1:20 pm
YouTube clip3/21/2015, 1:17 pm
We did it... JC Benifit... Thank you!3/21/2015, 12:38 pm
JC Benefit $137 *NM*3/21/2015, 11:38 am
done *NM*3/21/2015, 10:46 am
JC Benefit - $207 Chuck Jones3/21/2015, 10:32 am
Benefit for Jorge3/21/2015, 10:27 am
JC Benefit3/21/2015, 10:18 am
JC Benefit $127 *NM*3/21/2015, 10:13 am
JC BENEFIT $237, Ron Solfest3/21/2015, 10:01 am
JC BENEFIT $135 *NM*3/21/2015, 9:49 am
Less than 3k to go come on !!! *NM*3/21/2015, 9:44 am
JC Benefiit - $1923/21/2015, 9:36 am
JC Benefit - $152, Jim Seyfried3/21/2015, 9:36 am
JC Benefit - $97 Derek Roff3/21/2015, 9:19 am
JC Benefit Ralph Fahringer $282.00 *NM*3/21/2015, 9:11 am
JC benifit $97 Florida 5/8 V gouge3/21/2015, 8:42 am
JC Benefit $207 *NM*3/21/2015, 8:32 am
JC Benefit, $137 *NM*3/21/2015, 8:26 am
JC Benefit $827.00 *NM*3/21/2015, 8:22 am
JC Benefit3/21/2015, 7:48 am
JC Benefiit3/21/2015, 7:30 am
J.C. Benfit $172.00 *NM*3/21/2015, 7:16 am
JC Benefit3/21/2015, 6:58 am
JC Benefit, $97, David Propst *NM*3/21/2015, 6:55 am
JC Benefit $102. AlanZ & LaurenZ3/21/2015, 6:17 am
JC Bebefit - $77.00 George Guadiane3/21/2015, 6:11 am
JC Benefit $973/21/2015, 4:52 am
JC BENEFIT $1473/21/2015, 4:21 am
JC Benefit3/21/2015, 3:05 am
JC Benefit3/21/2015, 2:06 am
JC Benefit $247 3/21/2015, 1:29 am
JC Benefit3/21/2015, 1:21 am
JC Benefit $187 Ken Vaughan *NM*3/21/2015, 1:14 am
JC Benefit $67 Gary Guenther3/21/2015, 1:12 am
JC benefit3/21/2015, 1:01 am
jc benefit3/21/2015, 1:00 am
JC Benefit $187 Baxter Smith3/21/2015, 12:51 am
JC Benefit, ($162.00) Paul Millo *NM*3/21/2015, 12:47 am
JC BENEFIT , ($162.00), Rik R *NM*3/21/2015, 12:34 am
JC BENEFIT Kelvin Burton $97 *NM*3/21/2015, 12:32 am
JC BENEFIT , ($292.00), Matt Bashore *NM*3/21/2015, 12:27 am
JC Benefit Robert Stavran $162 Central WI *NM*3/21/2015, 12:25 am
"POST NEW" THREAD FOR EACH JC BENEFIT PURCHASE3/21/2015, 12:24 am
JC BENEFIT - $192.00 _ BRETT SCHENK3/21/2015, 12:09 am
Please read these rules before you order for Jorge3/19/2015, 10:38 pm
The goal for Jorge is now up to $20,0003/19/2015, 1:20 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*3/18/2015, 5:41 pm
It's time to pull together to help one of our own.3/18/2015, 1:12 am
Bleaching Walnut Sapwood ? *PIC*3/17/2015, 7:52 pm
Small projects *PIC*3/17/2015, 11:20 am
De-humidification wood drier3/17/2015, 8:52 am
Book: Turning Duck and Game Calls3/16/2015, 5:07 pm
New Spheres3/15/2015, 1:19 pm
Using the router on the lathe *LINK*3/15/2015, 8:35 am
Where does your AAW club meet?3/14/2015, 10:33 pm
Where does your AAW club meet?3/14/2015, 10:31 pm
Closed on my home3/13/2015, 5:06 pm
I wish I had a new piece finished, 3/13/2015, 10:42 am
Spring may be here!!!!!3/12/2015, 5:24 pm
Carbide tip issue 'PIC'3/12/2015, 11:38 am
Don Pencil 3/12/2015, 11:32 am
Low Tack Glue Sticks?3/12/2015, 7:49 am
Looking at a new bandsaw - anyone have the MM16?3/12/2015, 12:58 am
WOW site... don't panic3/11/2015, 8:55 pm
OT unless you travel I-403/11/2015, 5:15 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*3/11/2015, 2:10 pm
Tribute to David Nittmann3/10/2015, 12:00 am
Bradford pear crop circles3/9/2015, 5:55 pm
Black Locust3/8/2015, 10:41 pm
Oregon Woodturning Symposium3/8/2015, 1:30 pm
Portable Lathe3/7/2015, 8:25 pm
Question for John Lucas3/7/2015, 6:15 pm
Giving Back *PIC*3/7/2015, 3:54 pm
1,280 cubic feet of shop3/7/2015, 8:48 am
Robbo's next lathe *NM* *LINK*3/6/2015, 8:11 pm
Ash Crotch Hollow Form *PIC*3/6/2015, 6:54 pm
Some One Else's Segmenting *PIC*3/6/2015, 5:45 pm
Florida Manitoba Maple Turnings *PIC*3/6/2015, 5:31 pm
Finishing Laser Engraved wood Pens *LINK*3/6/2015, 4:31 pm
It's on the floor, Phew! *PIC*3/6/2015, 3:05 pm
Site of possible interest to turners, woodworkers *LINK*3/6/2015, 11:10 am
Ever run into machine setting epoxy grout? *LINK*3/5/2015, 7:26 pm
We've Officially Moved.....3/5/2015, 5:22 pm
Glasser gouge replacement3/5/2015, 4:50 pm
alan batty video *LINK*3/5/2015, 10:04 am
hope everyone survives the weather3/5/2015, 6:02 am
Hackberry question3/4/2015, 5:02 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*3/4/2015, 4:30 pm
Insert tooling doesn't have to be carbide *LINK*3/4/2015, 3:55 am
my last turnings for a while *PIC*3/3/2015, 9:44 pm
I'm going to take up knitting3/3/2015, 7:59 pm
Carving jig for bowls *PIC*3/3/2015, 4:32 pm
Gallery/Site coding thought.3/3/2015, 1:03 pm
40V chain saws3/3/2015, 7:52 am
Why member gallery does not work3/2/2015, 7:38 pm
Chainsaw Chopsaw3/2/2015, 6:48 pm
New website *LINK*3/2/2015, 5:29 pm
Shocked by my lathe.3/2/2015, 2:54 pm
someone want to beat Dick Coers :) *NM* *LINK*3/2/2015, 7:50 am
Actually defending carbide tools...3/1/2015, 9:59 am
Now I know what to do with all that wood I have *NM* *LINK*3/1/2015, 9:12 am
no wonder my shop was crowded *PIC*3/1/2015, 6:15 am
simple photo technique from florida demo *PIC*2/28/2015, 9:19 pm
just keeping the photo threads going2/28/2015, 8:23 pm
Gallery problems2/28/2015, 7:40 pm
Powermatic Inverter = Dead ???2/27/2015, 8:52 pm
a photo finish...2/27/2015, 3:47 pm
Purpleheart2/26/2015, 6:19 pm
Finally got the shop temp up to........ *PIC*2/26/2015, 2:38 pm
Sold the Box elder salad bowl set2/25/2015, 7:32 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*2/25/2015, 2:39 pm
Bad vibes on the JET 16422/25/2015, 11:21 am
My new lathe leaves Arizona tomorrow *PIC*2/24/2015, 3:34 pm
Been out of pocket for awhile ... (maybe OT)2/23/2015, 4:06 pm
Where can I find more of these? *PIC*2/23/2015, 1:34 pm
First time *PIC*2/23/2015, 10:18 am
James Pearce wins ACC Baltimore excellence award *PIC*2/22/2015, 11:20 pm
Twisted Candle Stick *PIC*2/22/2015, 7:36 pm
Norm Sartorius wins CWA Excellence in Wood award2/22/2015, 7:15 pm
Carbide Tipped Tools2/22/2015, 12:34 pm
Hope everyone is ok in tennessee. 2/22/2015, 4:39 am
Pistachio wood *PIC*2/21/2015, 3:21 pm
Squished Amphora - shape dilemma *PIC*2/21/2015, 2:25 pm
Guess I'll get more interested in spindle turning *PIC*2/21/2015, 2:10 am
Tips for Decorating Kids’ Bedrooms2/21/2015, 1:16 am
WoodFast Lathes2/20/2015, 8:10 pm
Video showing bowl turned on sliding headstock?2/20/2015, 7:26 pm
Hear ye, hear ye, the OVWG Symposium...2/20/2015, 3:07 pm
Steel vs cast iron. 2/20/2015, 1:18 pm
Gallery, nothing seems moving2/19/2015, 9:35 pm
Ed Koenig *LINK*2/19/2015, 7:28 pm
Lathe Upgrade2/19/2015, 12:40 pm
Dandit, this cold is no fun! I've had......2/19/2015, 12:31 pm
Didn't Mr Lucas...2/18/2015, 5:41 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*2/18/2015, 4:11 pm
Hand Tool Chat - Tonight, 9:30 - Open Topic *NM*2/18/2015, 3:00 pm
Bedroom remodel phase 1 *PIC*2/18/2015, 2:55 pm
closes quarter drill2/18/2015, 11:14 am
Need some advice please2/18/2015, 8:10 am
The topic of steel. Not quite OT. *LINK*2/17/2015, 11:09 am
Yarn bowl question2/16/2015, 10:04 pm
Hope everyone is surviving this storm.2/16/2015, 4:39 pm
Drive centers2/16/2015, 3:24 pm
Cold Weather thoughts and opportunities2/16/2015, 3:24 pm
Shop Heating: Insulation (Long, but worth it! 8) *PIC*2/16/2015, 1:49 pm
segeasy plate for solid rings2/16/2015, 10:08 am
Heating system in new shop2/15/2015, 11:13 am
Gouges2/14/2015, 10:36 pm
Smoothing the inside curves2/14/2015, 10:30 pm
My entries into AAW's Merging show *PIC*2/14/2015, 9:30 am
Photography - lighting illusions *PIC*2/13/2015, 4:15 pm
drill rod to curved tool rest *PIC*2/13/2015, 11:50 am
a comment on photography - and check out my newest2/13/2015, 2:48 am
Sliding Headstock2/12/2015, 8:45 pm
Finish cuts on some punky maple and figured myrtle2/12/2015, 5:28 pm
DVD2/12/2015, 10:56 am
My First Club Demo *PIC*2/11/2015, 8:45 pm
Don't Forget Turning Chat Tonight 9:30 Eastern2/11/2015, 2:10 pm
CBN Grinding Wheels2/10/2015, 1:32 pm
The Woodworking Shows2/10/2015, 11:09 am
OT: Japanese joinery2/10/2015, 8:19 am
demo's in Atlanta 2/9/2015, 8:16 pm
A better cartoon has not been drawn *LINK* *PIC*2/9/2015, 6:19 pm
American Woodshop/Osage Orange2/9/2015, 9:01 am
Went deer hunting last night- with my SUV2/9/2015, 8:58 am
A Call To All2/8/2015, 5:20 pm
Hannes Caliper, Whoa...... *PIC*2/8/2015, 2:36 pm
Powermatic 3520B tool rest2/8/2015, 10:55 am
Anybody going to Totally Turning? Need a roommate2/8/2015, 9:53 am
Rude Osolnik *LINK*2/7/2015, 7:19 am
working on a video2/6/2015, 10:31 am
how do you break the sleep cycle2/6/2015, 4:39 am
Right angle drill2/5/2015, 2:47 pm
Regional Symposium List2/5/2015, 8:25 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*2/4/2015, 5:49 pm
is turning your hobby or is building a shop2/4/2015, 9:17 am
The house is going through-closing on march 132/4/2015, 5:22 am
Turning Woods2/3/2015, 10:48 pm
Choice Woods2/3/2015, 4:35 pm
***GUEST CHAT TUESDAY*** *LINK*2/3/2015, 8:38 am
misc tool2/2/2015, 3:40 pm
Exotic Burl- Mardena Blaney2/2/2015, 1:35 pm
Boiling wood2/1/2015, 9:30 pm
hollow vessel collection *PIC*2/1/2015, 8:51 pm
To turn or watch2/1/2015, 4:08 pm
OT To turn or watch football2/1/2015, 10:06 am
Taw symposium2/1/2015, 8:05 am
OT1/31/2015, 8:02 pm
hollow form *PIC*1/31/2015, 4:40 pm
More Good News!!!1/30/2015, 6:03 pm
Ryobi bandsaw1/30/2015, 4:22 pm
Darwin Award candidate1/30/2015, 2:54 pm
Featured Artist For February1/29/2015, 10:35 am
OT 48 years1/29/2015, 8:31 am
possible new shop *PIC*1/28/2015, 11:51 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*1/28/2015, 10:16 am
more "risky business" *PIC*1/27/2015, 2:28 pm
Natural layered color hollow vessels *PIC*1/26/2015, 7:04 pm
Carving for cat lovers and a sanding question1/26/2015, 1:31 am
couple maple hollow forms *PIC*1/25/2015, 11:39 pm
Remove Turpentine smell from Pine1/25/2015, 11:37 pm
risky business *PIC*1/25/2015, 7:53 pm
Wedding ring1/24/2015, 5:36 pm
how to tell..1/24/2015, 1:23 pm
opinion of locust as carving mallet *PIC*1/23/2015, 10:44 am
WHAT THE1/22/2015, 8:04 pm
7mm shaft on sanding pads1/22/2015, 3:24 pm
negative spaces *PIC*1/22/2015, 7:59 am
Passing og Giles Gilson1/22/2015, 4:55 am
Be careful *PIC*1/21/2015, 7:09 pm
Ambrosia Maple Bowl *PIC*1/21/2015, 6:15 pm
Don't Forget Turning Chat Tonight 9:30 Eastern1/21/2015, 3:12 pm
Past work, Cherry Frog Bowl *LINK*1/21/2015, 10:41 am
Scraper video1/20/2015, 7:09 pm
Anyone going to Totally Turning in Saratoga?1/20/2015, 5:09 pm
'Hard Wax Oil' finish1/20/2015, 1:14 pm
Utah Woodturning Symposium end time?1/20/2015, 8:54 am
Burnished Surface - Permanent?1/20/2015, 2:22 am
Old Maple Bowl *PIC*1/20/2015, 2:12 am
While speaking of TransTints,...1/19/2015, 8:34 pm
Help with Raised Grain over time.1/19/2015, 12:26 pm
Coloring epoxy1/19/2015, 9:47 am
***SURVEY: THE IDES OF JANUARY***1/19/2015, 8:07 am
How do you sotre1/19/2015, 1:41 am
Post Oak log *PIC*1/18/2015, 12:10 am
my day...1/17/2015, 10:03 pm
pop-ups taking over1/17/2015, 9:21 pm
New Work Space *PIC*1/17/2015, 5:06 pm
Can't have wood in the yard 1/17/2015, 8:40 am
New Dust Collection *PIC*1/16/2015, 6:03 pm
OT: Outlet Safety1/15/2015, 9:26 pm
Barracuda CSC2000C Chuck1/15/2015, 9:14 pm
hollowing problem1/15/2015, 8:14 pm
Follow-up on "something new"...Prism Paint *LINK* *PIC*1/15/2015, 7:29 pm
photo tent *PIC*1/15/2015, 6:48 pm
Before power tools1/15/2015, 4:15 pm
Overheater Headstock1/15/2015, 2:28 pm
Don't Forget Turning Chat Tonight 9:30 Eastern1/14/2015, 4:17 pm
Primordial Life Form *PIC*1/13/2015, 10:13 pm
5 Calabashes *PIC*1/13/2015, 7:34 pm
built my Seg-easy the last 2 days *LINK*1/13/2015, 6:29 pm
getting ready for an inside out flower demo1/13/2015, 4:25 pm
confidence *LINK*1/13/2015, 4:20 pm
Member Galleries and Turning Chat *LINK*1/12/2015, 9:08 pm
ot - chat with mobile?1/12/2015, 8:39 pm
Special shaving brush1/12/2015, 4:51 pm
learned something new yesterday1/12/2015, 6:40 am
Not Charlie-but *PIC*1/12/2015, 6:33 am
hollow vessels1/11/2015, 7:54 pm
Trent Bosch Visualizer1/11/2015, 10:32 am
Raising Grain ?1/9/2015, 8:55 am
Another new thing...glow-in-the-dark *PICS* *LINK*1/8/2015, 3:34 pm
Don't Forget Turning Chat Tonight 9:30 Eastern1/7/2015, 2:03 pm
Pluses & Minuses, Positive & Negative *PIC*1/7/2015, 1:31 pm
Re: Replacing PM3520 spindle1/6/2015, 11:10 pm
New process *PICS*1/6/2015, 10:07 pm
Haven't been around much and heres why.1/6/2015, 5:59 pm
Grinder Start-up Considerations with CBN Wheels1/6/2015, 4:09 pm
Magnetic turning tool rack1/6/2015, 12:32 am
Anyone attended or shown at Baltimore ACC show?1/5/2015, 11:07 pm
Pentel Pencil Sale - Office Depot1/5/2015, 3:55 pm
Capt Eddie1/5/2015, 12:31 pm
Another one, Mounting Bowl Blanks1/4/2015, 9:24 pm
Russ Fairfield: 11/18/1935 - 1/4/20111/4/2015, 9:09 pm
OT Genealogy software1/4/2015, 6:31 pm
Tutorial on turning Pepper mills?1/4/2015, 12:18 pm
anyone need a lathe and up for a challenge1/3/2015, 2:33 pm
Transporting a bandsaw1/3/2015, 12:16 pm
Hey it's woodturning day1/3/2015, 9:55 am
Source for stainless steel ferrules 1/2/2015, 11:52 pm
Multiple Full Sized Lathes?1/1/2015, 8:51 pm
OK here's a shop big enough *NM* *LINK*1/1/2015, 9:40 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/31/2014, 2:52 pm
OT It finally Happended *PIC*12/31/2014, 1:20 pm
***Happy New Year!***12/31/2014, 12:35 pm
Magnolia - What a sweet turn *LINK*12/31/2014, 9:28 am
always worth reading *NM* *LINK*12/31/2014, 8:07 am
New Chain Saw Recommendations ?12/30/2014, 1:04 pm
need some help12/29/2014, 10:25 pm
OT-sorta- Photography12/29/2014, 10:03 pm
It ain't wood turning, but....12/29/2014, 9:04 pm
estate planning ;-)12/29/2014, 9:34 am
What turning presents did you get for holidays? *NM*12/29/2014, 9:28 am
can't do this on my mini lathe *NM* *LINK*12/29/2014, 4:22 am
getting some interesting wood *PIC*12/28/2014, 5:38 pm
making cars on the lathe *LINK*12/28/2014, 12:43 pm
Oneway Vari-Grind 2????? *PIC*12/28/2014, 9:03 am
Tail stock alignment...(kinda long)12/27/2014, 9:19 am
OK actually I did get some tools12/27/2014, 7:41 am
Alan Batty thread chasing *LINK*12/27/2014, 4:12 am
Wobbly Jacobs chuck: chuck or spindle?12/25/2014, 9:53 pm
HO HO HO12/25/2014, 4:18 pm
I didnt get any turning tools for Christmas 12/25/2014, 7:19 am
Merry Christmas everyone12/25/2014, 4:02 am
Source for cheese knife blades, etc.12/24/2014, 7:19 pm
New Shop Vac12/24/2014, 3:55 pm
Don't Forget Turning Chat Tonight 9:30 Eastern12/24/2014, 2:14 pm
A little Christmas gift from me to you *LINK*12/24/2014, 2:02 pm
Ellis thanks for a great year12/24/2014, 7:35 am
Holidays12/24/2014, 7:22 am
WoodCentral Upgraded12/24/2014, 5:57 am
Highlighting chatter work12/23/2014, 11:57 pm
A Glowing Accomplishment12/23/2014, 7:19 pm
Some recent stuff. Holiday and other. *PIC*12/23/2014, 3:00 pm
looking for suggestions on turning Osage *PIC*12/22/2014, 7:53 pm
OT: Fill 'em up12/22/2014, 2:35 pm
Secret Santa *PIC*12/21/2014, 10:03 pm
Early Christmas present *PIC*12/21/2014, 9:00 pm
Bowl Burning for David Nitmann *PIC*12/21/2014, 6:44 pm
Steaming! *PIC*12/21/2014, 5:48 pm
Ornaments - second try *PIC*12/21/2014, 4:00 pm
(Message Deleted by Poster)12/21/2014, 1:08 pm
Not Woodturning with Hunter tools *PIC*12/21/2014, 10:22 am
Things I've been working on lately *PIC*12/20/2014, 10:46 pm
Last Minute Xmas Gift Idea *PIC*12/19/2014, 11:05 pm
Sea Urchin Treatment12/19/2014, 8:45 am
Which Hunter tool?12/19/2014, 7:25 am
New box *PIC*12/18/2014, 8:15 pm
Round things for your round things *LINK* *PIC*12/18/2014, 6:42 pm
How the blankety-blank do you keep padauk from...12/18/2014, 1:49 pm
How to Log on??12/18/2014, 11:49 am
Collet chuck video12/18/2014, 11:21 am
Woodriver Turning Tools12/17/2014, 8:39 pm
why it's nice to make your own tools *PIC*12/17/2014, 5:11 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/17/2014, 12:36 pm
Bowl turning ergonomics...12/16/2014, 2:42 pm
Ornament -- Old Growth Hemlock *PIC*12/16/2014, 2:03 pm
Sfirri Inspired 2Axes, 2 Profiles Piece *PIC*12/16/2014, 3:45 am
OTC quality threaded rod and long nut12/16/2014, 12:03 am
Segment sled12/15/2014, 7:28 pm
Good news!!!12/15/2014, 8:28 am
Drilling through PM3520 tail stock: possible?12/14/2014, 12:38 pm
Round carbide insert source?12/13/2014, 8:39 pm
Friends *PIC*12/13/2014, 7:54 pm
Still having problems with email *NM*12/13/2014, 3:04 pm
GoPro12/13/2014, 12:59 pm
Northwest Wood Gallery box show winners12/13/2014, 10:43 am
test *NM*12/11/2014, 6:48 am
saving Minwax wipe on poly update12/10/2014, 9:10 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/10/2014, 2:41 pm
Oil for Vacuum Pump?12/10/2014, 2:25 pm
WoW?12/10/2014, 2:10 pm
Feathers *PIC*12/10/2014, 12:47 pm
Want to make a lame *LINK*12/10/2014, 11:53 am
8 spinning tops on a dime *PIC*12/10/2014, 11:18 am
Something else to do with those bug holes. *LINK*12/10/2014, 1:03 am
Turning tops today *PIC*12/9/2014, 10:16 pm
For Bill Tindall and other Chestnut Fans *LINK*12/9/2014, 10:07 am
For Bill Noce12/8/2014, 6:34 pm
Brushes with destiny...12/8/2014, 4:45 pm
dust collector duct noise12/8/2014, 1:16 pm
Eccentric Chucks revisited12/7/2014, 11:21 pm
curly maple engraved pendants *PIC*12/7/2014, 6:56 pm
New work *PIC*12/7/2014, 2:54 pm
Crpep myrtle12/7/2014, 8:32 am
Need a new drill12/6/2014, 4:06 pm
Small motor problem12/5/2014, 6:07 pm
Gadgets, tips, tricks in the shop *PIC*12/5/2014, 4:37 pm
Danish Oil Finish on dyed turnings12/4/2014, 2:51 pm
Home made lathe. Link12/4/2014, 2:19 pm
TAW 2015 Woodturning Symposium - Registration open12/4/2014, 11:19 am
Bucket with top hat *PIC*12/3/2014, 10:47 pm
OT track snow blowers12/3/2014, 7:17 pm
Mixed Media12/3/2014, 6:53 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/3/2014, 1:28 pm
Using Epoxy In The Cold12/3/2014, 8:04 am
Thin Turning Advice12/3/2014, 5:29 am
getting tired of my pictures yet? Well *PIC*12/2/2014, 9:45 pm
It's now a red oak football *PIC*12/2/2014, 3:38 pm
Black Acacia questions *PIC*12/1/2014, 10:41 pm
Suggestions solicited12/1/2014, 10:28 pm
Cyber Monday12/1/2014, 10:52 am
Eccentric chucks11/30/2014, 8:01 pm
Off center or multi-axis11/30/2014, 10:07 am
First post bur oak bowl / vase *PIC*11/30/2014, 9:44 am
Christmas Tree Ornament YouTube Video Posted *LINK* *PIC*11/30/2014, 8:56 am
side grain red oak hollow form *PIC*11/29/2014, 8:25 pm
Another new Natural edge bowl *PIC*11/28/2014, 1:55 pm
WoodCentral Secret Santa11/28/2014, 1:54 pm
I have a favor to ask11/28/2014, 10:10 am
I'm going with no finish *PIC*11/27/2014, 9:54 pm
6 Axes Human Figure HOW TO *LINK* *PIC*11/27/2014, 12:38 pm
Maple natural edge bowl *PIC*11/27/2014, 11:44 am
Happy thanksgiving11/27/2014, 8:19 am
Thanksgivinb11/27/2014, 8:14 am
Servo motors, clutch motors.11/27/2014, 12:14 am
OT taught s-daughter & G-daughter to make pies11/26/2014, 7:22 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*11/26/2014, 5:33 pm
square headstock in the way11/26/2014, 1:38 pm
hollowing dried dogwood11/26/2014, 8:43 am
OT Tommy Emmanuel -Angelena *NM* *LINK*11/26/2014, 4:35 am
New Powermatic 2020 *LINK*11/25/2014, 9:09 pm
OT? Lose tools no more. High tech toolbox *LINK*11/25/2014, 5:09 pm
On legacy *PIC*11/25/2014, 2:20 pm
TURNINGWOOD.com Black Friday-CyberMonday Sale11/25/2014, 8:24 am
OT-Please help identify this fruit11/25/2014, 2:10 am
New turning - Finishing question *PIC*11/24/2014, 6:02 pm
What do you do at 3am in the morning11/24/2014, 3:53 am
Gobble, Gobble *PIC*11/23/2014, 8:46 pm
It sure is peaceful and quiet!11/23/2014, 7:06 pm
New Work *PIC*11/22/2014, 4:02 pm
laser pointers11/22/2014, 3:26 pm
Presentation is everything: Buck Antler Soup *LINK*11/22/2014, 1:58 pm
3 new You Tube clips11/22/2014, 12:46 pm
Time for Ornaments *PIC*11/21/2014, 11:35 am
hey Phillip Medghalchi11/20/2014, 10:53 pm
Adware and Malware11/20/2014, 4:57 pm
Terminology Question? *PIC*11/20/2014, 4:46 pm
I've heard of x-mass in july11/20/2014, 10:33 am
Crotch Pecan *PIC*11/19/2014, 10:43 pm
spalted elm hollow form w/ lid11/19/2014, 9:17 pm
Which oil for Walnut11/19/2014, 3:58 pm
Which D-Way CBN11/19/2014, 12:05 pm
Don't Forget Turning Chat Tonight 9:30 Eastern11/19/2014, 12:03 pm
Write-up for heart shaped bowl11/19/2014, 2:44 am
Norway maple hollow form *PIC*11/18/2014, 9:38 pm
Soft maple burl urn *PIC*11/18/2014, 4:07 pm
Heart shaped NE bowl *PIC*11/18/2014, 1:58 pm
Ouch, ouch, ouch11/18/2014, 3:02 am
Japanese turning *LINK*11/17/2014, 7:59 am
My First YouTube Turning Video Post *LINK*11/16/2014, 10:17 pm
Shipping Green Wood11/16/2014, 12:22 pm
Activator musings11/16/2014, 10:27 am
Hilton Head SC Turning??11/16/2014, 8:59 am
Speed Controller for Delta 1220 Lathe Problem11/16/2014, 5:41 am
Muse Abandonment Issue11/15/2014, 11:04 pm
Back from my Arkansas demo11/15/2014, 8:36 pm
OT does gas change from state to state11/15/2014, 8:27 pm
hey san antonio turners..11/15/2014, 4:14 pm
WOP finish11/15/2014, 3:55 pm
Bradford Pear Bowl *PIC*11/15/2014, 3:06 pm
OT My old high school plays for state championship11/15/2014, 12:18 am
Fellow turner Bill Crommett has passed away *LINK*11/14/2014, 7:34 pm
Old work - swifts (more yarn tools) *PIC*11/14/2014, 6:28 pm
Stuart Batty up for auction11/14/2014, 12:14 am
Drawer knob question11/13/2014, 7:09 am
walnut11/13/2014, 1:08 am
discrimination11/12/2014, 11:20 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*11/12/2014, 5:20 pm
safely cutting ound log on bandsaw11/12/2014, 12:37 pm
comparing turning projects11/11/2014, 10:43 pm
Worm holes *PIC*11/11/2014, 9:56 pm
Veterans Day11/11/2014, 3:21 pm
Recent turning - Political Reality *PIC*11/10/2014, 9:14 pm
Sandpaper.11/10/2014, 5:14 pm
NEW idea for turning...11/10/2014, 2:25 pm
Christmas Presents11/10/2014, 9:36 am
Teapot11/9/2014, 12:06 pm
Spindles and spindle display *PIC*11/8/2014, 11:09 pm
Big Ash Splitter *LINK*11/7/2014, 7:20 am
Turning HDPE11/6/2014, 7:34 pm
Dust Collection11/6/2014, 3:39 pm
1/2'' bandsaw blades11/6/2014, 3:35 pm
Pen Clips11/6/2014, 11:19 am
Framing the "Food Safe" question differently.11/6/2014, 8:36 am
cool mini lathe11/5/2014, 3:53 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*11/5/2014, 2:32 pm
OT:TiteBond record cleaner *NM* *LINK*11/5/2014, 10:01 am
Cocobolo Candle Holders *PIC*11/4/2014, 6:03 pm
Piercing and wood choice advice please11/4/2014, 12:20 pm
Exhibition - Lathe-Turned Works - KY Artisan Cente11/4/2014, 12:05 pm
The world has lost a genius *LINK*11/3/2014, 5:48 pm
woodcut bowl saver11/3/2014, 1:35 pm
some new shapes I've been playing with *PIC*11/2/2014, 6:36 pm
Turning a Rosette *LINK*11/2/2014, 5:45 pm
a lot of new turning books out *LINK*11/2/2014, 9:25 am
food safe or not food safe?11/1/2014, 12:38 pm
any one in LA, CA..........10/31/2014, 11:43 pm
Colored pencil turning10/31/2014, 9:48 am
Celtic knot in 10 minutes *LINK*10/31/2014, 8:31 am
Need assistance with rosettes10/30/2014, 10:20 pm
This is how to sharpen lathe tools :-) *NM* *LINK*10/30/2014, 2:11 pm
Bandsaw up and running10/30/2014, 1:48 pm
Don't Forget Turning Chat Tonight 9:30 Eastern10/29/2014, 5:40 pm
corian ornament *PIC*10/29/2014, 4:16 pm
new mirror *PIC*10/29/2014, 2:14 pm
Spindle turning question10/28/2014, 9:42 pm
new ornaments *PIC*10/28/2014, 7:43 pm
Thanks to Ed Davidson -- yo-yo turning dvd10/28/2014, 10:18 am
Marking Knife *PIC*10/26/2014, 10:03 pm
Can anyone explain........10/26/2014, 12:18 pm
Sad story... good ending10/25/2014, 10:27 pm
Sightings... of John Lucas, that is. *PIC*10/25/2014, 10:19 pm
Show season is ending. How was yours10/24/2014, 9:32 pm
seam ripper kits10/23/2014, 6:00 pm
Red Tip turning *PIC*10/23/2014, 1:13 am
Question about wall thickness (pic) *PIC*10/22/2014, 7:45 pm
Jet 1236 spindle pulley10/22/2014, 6:47 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*10/22/2014, 2:20 pm
carving and turning Padauk10/21/2014, 3:32 pm
wow chat10/20/2014, 9:56 pm
hollow forms shape study *PIC*10/20/2014, 2:37 pm
zentagle car *NM* *LINK*10/20/2014, 1:42 pm
Very interesting but I'll stick to my one of a kin *NM* *LINK*10/20/2014, 10:34 am
Bleaching wood10/20/2014, 4:56 am
Tambootie? Smells like incense?10/19/2014, 3:02 pm
New Benefit Auction *LINK*10/19/2014, 10:27 am
Candlestick holders10/17/2014, 10:31 pm
AAW Symposium T-Shirts For Sale *PIC*10/17/2014, 4:17 pm
Saving finish10/17/2014, 11:34 am
Arbortec contour sander *LINK*10/16/2014, 3:35 am
what do you do when you can't sleep10/16/2014, 3:33 am
Don't Forget Turning Chat Tonight 9:30 Eastern10/15/2014, 7:46 pm
Bandsaws and bowl blank prep10/15/2014, 11:15 am
Anybody know where I can get NIP cheap/free10/14/2014, 7:38 pm
Chainsaw and bowl blank prep10/14/2014, 11:19 am
Which Thread Chaser10/14/2014, 9:49 am
Free Yo-Yo Turning DVD *PIC*10/13/2014, 6:21 pm
New Yo-Yos10/13/2014, 5:06 pm
CSI episode - Ventilated helmets for woodturning? *PIC*10/13/2014, 3:33 pm
How to cut up entire Norfolk Pine tree for turners10/13/2014, 1:01 pm
NEW Shop Shot - #96310/13/2014, 6:51 am
Some new work since September 15 *PIC*10/12/2014, 9:57 pm
Hanging flexshaft motor carrier10/11/2014, 10:54 pm
Et Tu? (6 axes Ceaser) *PIC*10/11/2014, 10:03 pm
passing of a great friend *PIC*10/11/2014, 3:04 pm
No shop for 6-8 weeks 10/9/2014, 5:28 pm
Bent Lamp Auger *PIC*10/9/2014, 5:21 pm
Red Tip bowls *PIC*10/8/2014, 5:56 pm
Don't Forget Turning Chat Tonight 9:30 Eastern10/8/2014, 12:11 pm
Apple Natural edge Calabash bowl *PIC*10/7/2014, 5:37 pm
Number 2 vessel off the camera system *PIC*10/6/2014, 11:21 pm
multi-axis stopper *PIC*10/4/2014, 9:13 pm
skewchigouge?????10/4/2014, 8:50 pm
First vessel off optical system *PIC*10/4/2014, 2:30 pm
I miss my workshop10/4/2014, 9:39 am
Glenn Jeffries turns 100 *LINK*10/3/2014, 2:18 pm
Trend Air Pro10/2/2014, 11:29 am
Anyone turn chinaberry?10/2/2014, 8:46 am
Productive September *PIC*10/1/2014, 10:11 pm
About to go optical with my hollowing *PIC*10/1/2014, 7:06 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*10/1/2014, 4:43 pm
Finally back in the Shop after *PIC*9/30/2014, 10:42 pm
Finishing question, archaic9/30/2014, 11:03 am
Hollowform with offset opening9/30/2014, 9:39 am
New terry Martin book9/29/2014, 8:56 pm
OT. Hulling walnuts 9/29/2014, 7:22 pm
gluejoints9/29/2014, 6:38 pm
Funeral urns9/29/2014, 6:05 pm
3520 creaking noises9/29/2014, 5:21 pm
easy fix for making tops9/28/2014, 10:12 pm
Pen/Pencil combination kit?9/26/2014, 2:24 pm
Glue blocks and wet wood9/26/2014, 12:04 pm
removing 20 in sanding disc9/24/2014, 8:54 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*9/24/2014, 2:37 pm
Kelton coring9/23/2014, 10:10 pm
Vacuum pumps, which one?9/23/2014, 1:56 pm
OT Scam9/23/2014, 11:04 am
Dust Collection Upgrade... Need Input9/23/2014, 10:08 am
What was the last "original" idea in turning?9/22/2014, 12:44 pm
Georgia symposium9/21/2014, 5:05 pm
Like Potato Chips . . . *PIC*9/21/2014, 11:59 am
How much suck on vacuum chuck?9/19/2014, 8:49 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*9/17/2014, 2:01 pm
I like to carve feet on my turnings, but *LINK*9/17/2014, 1:15 pm
Serpentine Bolt Action Pens *PIC*9/15/2014, 9:14 pm
I miss my lathe 9/15/2014, 4:18 pm
Torn Grain and Vacuum9/15/2014, 9:31 am
*** SURVEY: THE IDES OF SEPTEMBER *** *LINK*9/15/2014, 8:29 am
Report On the Jamie Donaldson's class9/13/2014, 2:01 pm
Log hauler *PIC*9/13/2014, 11:45 am
Drying Green Cherry9/12/2014, 8:18 pm
Water Transfer Imaging *PIC*9/12/2014, 6:06 pm
I am a wood hoarder *PIC*9/11/2014, 11:04 pm
Thanks Rum and the Photo advice from others *PIC*9/11/2014, 6:13 pm
You know you9/11/2014, 3:05 pm
OT - A sweet eulogy *LINK*9/11/2014, 12:24 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*9/10/2014, 2:04 pm
Sweet gum qsn. *PIC*9/10/2014, 1:21 am
WILD CHERRY9/9/2014, 10:18 am
Hose clamp with magnet9/8/2014, 7:19 pm
Playing with Pins *PIC*9/7/2014, 8:03 pm
sad news9/7/2014, 10:04 am
Hang time9/7/2014, 1:58 am
reverse side sharpening9/6/2014, 11:39 pm
Kiln9/6/2014, 9:41 pm
Woodturners Wonders? 9/6/2014, 11:11 am
Friction burn9/6/2014, 10:43 am
Here's your sign.9/5/2014, 4:42 pm
Noise canceling9/5/2014, 3:29 pm
My you tube9/5/2014, 3:09 pm
Raygear Face Shield and Woodturning PPE9/5/2014, 12:58 pm
Bin Pho at Sundance - old news?9/5/2014, 1:02 am
Upcoming Workshop! *LINK*9/4/2014, 9:55 pm
Polishing gouge flutes??9/4/2014, 10:23 am
Hey Brad Vietje9/4/2014, 9:02 am
Best Wishes to John Lucas9/3/2014, 10:54 pm
Chatter tool, and texturing tool9/3/2014, 10:38 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*9/3/2014, 1:57 pm
Hawaii's Wood Show 20149/3/2014, 5:40 am
Virginia Woodturning Symposium9/2/2014, 9:06 pm
Advice for Student in Woodturning Classes9/2/2014, 8:37 am
The new "Axe" baseball bat *LINK*9/1/2014, 8:20 pm
Cherry? Maple Bowl? *PIC*8/30/2014, 4:10 pm
3 bowls done this morning. *PIC*8/30/2014, 11:17 am
little trip down to the shop LINK8/29/2014, 7:14 pm
I need a 5 foot swing lathe *NM* *LINK*8/29/2014, 2:53 pm
Burl Vase *PIC*8/29/2014, 12:08 pm
burl vase8/29/2014, 11:55 am
Latest turning - Sfirri style candlestick *PIC*8/28/2014, 8:56 pm
Maple and Walnut Segmented bowl *PIC*8/28/2014, 5:58 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*8/27/2014, 2:24 pm
another Urn question8/27/2014, 12:58 am
posting pictures8/26/2014, 9:22 pm
CA finish pens...We have a problem Houston! *PIC*8/25/2014, 11:25 pm
Hangin' Around The Cool Kids . . .8/25/2014, 1:27 pm
Test8/25/2014, 1:15 pm
Rosewood is forever... *PIC*8/25/2014, 11:51 am
OT Bless the engineers at Honda automotive!8/25/2014, 11:32 am
glass inside your bowl8/25/2014, 10:07 am
Woodturning Cruise 20148/25/2014, 8:36 am
Root ball *LINK*8/24/2014, 3:29 pm
Cremation Urn *PIC*8/24/2014, 9:03 am
finished mirrors *PIC*8/23/2014, 9:17 pm
John, you forgot to turn the lights out 8/22/2014, 9:33 pm
production run *PIC*8/22/2014, 8:36 am
This is what I made out of 126 colored pencils. *PIC*8/21/2014, 7:34 pm
Rut-Row! Help Needed ASAP *PIC*8/21/2014, 2:02 pm
Adjustable mini lathe stand8/20/2014, 11:09 pm
Don't Forget Turning Chat Tonight 9:30 Eastern8/20/2014, 2:48 pm
Bostik TopCote Aerosol8/20/2014, 1:07 pm
Pen Turning Questions8/20/2014, 1:05 am
lathe motor for General Int'l Maxi-Lathe8/19/2014, 6:08 pm
Turning Chat Topic8/19/2014, 5:38 pm
New Rikon Grinder8/18/2014, 6:26 pm
A misspent August weekend *PIC*8/18/2014, 8:41 am
OK, everybody laugh... *PIC*8/17/2014, 11:14 pm
punky wood stabilization.8/17/2014, 9:46 pm
I need glasses8/17/2014, 9:08 am
Trend faceshield battery8/16/2014, 6:28 pm
Some Experiments on Walnut Oil - Long8/16/2014, 6:11 pm
Where little trees come from *PIC*8/16/2014, 11:56 am
on ideas and talent...8/16/2014, 7:42 am
Chattanooga woodcraft8/15/2014, 8:58 pm
Wood table top.8/14/2014, 7:39 pm
David Nittmann passes away8/13/2014, 10:46 pm
who's going to swat?8/13/2014, 6:50 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*8/13/2014, 6:10 pm
Vine wrapped mirror *PIC*8/13/2014, 11:51 am
Do you ever have a Blow Out Day *PIC*8/12/2014, 10:01 pm
looking for... *PIC*8/11/2014, 11:44 pm
What is this? *PIC*8/11/2014, 4:54 pm
Woodturning Design magazine OB 8/11/2014, 1:37 pm
Finish Problem8/11/2014, 11:59 am
Bartering between artists and craftsmen8/11/2014, 11:45 am
flower *PIC*8/11/2014, 11:29 am
shop compressor8/9/2014, 8:50 pm
Raffan on hollowing8/9/2014, 12:35 am
Pricing our wood8/8/2014, 10:10 am
Norway Woodturning Cruise8/7/2014, 5:18 pm
Update on sticking spindle/chuck8/7/2014, 4:29 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*8/6/2014, 6:35 pm
Raise lathe8/6/2014, 6:05 pm
the good news and the bad news8/6/2014, 4:54 pm
Ornamental cherry8/6/2014, 4:42 pm
22" long 3/8" spindle *PIC*8/6/2014, 9:57 am
my $20 HF grinder finally died8/5/2014, 7:26 pm
Distant woodturning connection *PIC*8/5/2014, 9:25 am
Obtaining Good Wood for Turning8/4/2014, 6:28 pm
Pentel P205 Pencil Sale8/4/2014, 4:12 pm
Peeling cut versus Planing cut8/4/2014, 8:07 am
Wally8/3/2014, 5:47 pm
New Battery for Airstream8/3/2014, 11:20 am
Searching for video8/2/2014, 5:43 pm
First bowl in several years..... *PIC*8/2/2014, 1:47 pm
O.T. OO blanks for bows8/2/2014, 10:26 am
New Oliver lathe8/2/2014, 10:26 am
this thing is downright scary *LINK*8/2/2014, 12:04 am
Finishing: buffing Qsn. *PIC*8/1/2014, 6:30 pm
My hats off to those who teach8/1/2014, 1:10 pm
Does This Wine Taste Funny To You? *PIC*7/31/2014, 11:55 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/30/2014, 6:08 pm
A Glossary of Woodturning Terms *LINK*7/30/2014, 8:17 am
Spelling help 7/29/2014, 6:10 pm
3 new tools for the sharpening test *PIC*7/29/2014, 11:43 am
Do they make shock collars for Roosters7/29/2014, 7:35 am
What I am doing wrong sharpening? *PIC*7/28/2014, 8:40 pm
sharpening my new tools7/28/2014, 5:13 pm
lathe spindle log tip *PIC*7/28/2014, 11:14 am
Voting for AAW board members 7/28/2014, 7:10 am
new American Woodturner7/28/2014, 7:06 am
Emerald Ash Borer *LINK*7/28/2014, 6:26 am
OT bush ID *PIC*7/27/2014, 2:24 pm
spindles *PIC*7/26/2014, 11:21 pm
How many items do you take to a sale? *PIC*7/26/2014, 9:01 am
Under the be careful what you wish for heading.7/25/2014, 3:35 pm
oscillating sander7/24/2014, 3:31 pm
Grant money well spent *PIC*7/24/2014, 9:43 am
this is very interesting *NM* *LINK*7/24/2014, 9:06 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/23/2014, 4:14 pm
cold bending wood *LINK* *PIC*7/23/2014, 4:05 pm
Kelton McNaughton Center Saver7/23/2014, 10:23 am
are you an early morning person7/23/2014, 6:46 am
optical illusion *LINK*7/23/2014, 6:44 am
Wall mounts for platters or art pieces *PIC*7/22/2014, 8:13 pm
Buckeye Burl Platter *PIC*7/22/2014, 11:27 am
PlateHolder *PIC*7/22/2014, 10:32 am
new bowl,Roger Chandler thanks *PIC*7/21/2014, 10:16 pm
Walnut cold bend mirror *PIC*7/21/2014, 10:09 pm
Filling holes in finish *PIC*7/21/2014, 9:19 pm
Walnut S bowl *LINK* *PIC*7/21/2014, 9:06 pm
Mini lathe recommendations?7/21/2014, 10:41 am
poisenous trees-found this interesting7/21/2014, 7:11 am
Remote Switch for Dust Collector7/21/2014, 2:26 am
stack laminated mirror *PIC*7/20/2014, 10:31 pm
Been off the grid for a while7/20/2014, 5:43 pm
Selling wood Part II7/20/2014, 12:12 pm
can't have it both ways7/20/2014, 12:05 am
lathe speed drive broke7/19/2014, 10:44 pm
*** SURVEY: THE IDES OF JULY ***7/19/2014, 4:54 pm
Turning help needed7/19/2014, 10:15 am
Crack filling *PIC*7/19/2014, 2:55 am
Using walnut oil or tung for sanding7/18/2014, 2:23 pm
Threads jamming on spindle7/18/2014, 10:37 am
Linseed oil7/18/2014, 2:37 am
This isn't wood, but it is turning...7/18/2014, 12:53 am
Sanding disk post7/18/2014, 12:43 am
Natural Edge Pedestal bowl *PIC*7/17/2014, 9:04 pm
sanding disc7/16/2014, 10:27 pm
teaching teachers7/16/2014, 9:11 pm
Revolution time7/16/2014, 5:51 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/16/2014, 2:50 pm
I MIGHT be Back - Cherry Salad Bowl *PIC*7/16/2014, 2:44 pm
looking for new tool rest7/16/2014, 3:41 am
round picture frames plans7/15/2014, 7:08 pm
Fishing stories.....OT *PIC*7/15/2014, 5:22 pm
Teaching a turner7/15/2014, 2:47 pm
i get up too early *PIC*7/15/2014, 9:38 am
Summer Memories *PIC*7/14/2014, 1:41 am
Selling wood 7/13/2014, 3:32 pm
New Covered Jar *PIC*7/13/2014, 1:52 pm
pyxis - I'm coming out of the woodturners closet. *PIC*7/12/2014, 3:11 pm
how to upload from photo bucket?7/11/2014, 3:39 pm
Heathergems *LINK*7/11/2014, 6:51 am
mirror gluing jig *PIC*7/10/2014, 10:10 pm
Great ceramics turning/throwing vid *LINK*7/10/2014, 12:06 pm
Married 72 Years Today....7/10/2014, 11:00 am
A little bit of turning in these *NM* *LINK*7/10/2014, 2:15 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/9/2014, 12:17 pm
Thousand cankers7/9/2014, 9:23 am
do you like acronyms?7/8/2014, 4:22 pm
Things Speak To Me (Voices in my head?) *PIC*7/7/2014, 7:58 pm
what a waste of log7/7/2014, 12:58 am
Success With the Hunter Tool *PIC*7/6/2014, 8:42 pm
Just Playing *PIC*7/6/2014, 4:33 pm
Desk leg copying7/6/2014, 2:58 pm
How long does it take...7/5/2014, 11:22 pm
Chestnut & Walnut Wood Available7/5/2014, 7:35 pm
Cord for pendant 7/5/2014, 9:08 am
REALLY good or CRAZY?7/3/2014, 10:51 pm
Hickory box *PIC*7/3/2014, 9:41 pm
Cherry and Black Willow Bowls *PIC*7/3/2014, 7:10 pm
Exploring Pedestal forms -walnut *PIC*7/3/2014, 5:17 pm
Stool *PIC*7/3/2014, 12:26 pm
OT new doctors office visit procedure7/2/2014, 6:55 pm
Craft Supplies great service7/2/2014, 6:53 pm
Will acrylic and acetone penetrate punky wood?7/2/2014, 11:57 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*7/2/2014, 11:52 am
Anyone use gaiters when turning?7/2/2014, 11:26 am
Minimax T1247/2/2014, 10:56 am
New Wood Pile *PIC*7/1/2014, 2:34 pm
Administrator7/1/2014, 11:28 am
Where Gummy Worms come from . . . *PIC*6/30/2014, 1:51 pm
Posting Pics6/29/2014, 9:32 pm
Cross and flower platter *PIC*6/29/2014, 7:47 am
COTTONWOOD & WILLOW6/28/2014, 5:34 pm
Upcoming Workshops! *LINK*6/28/2014, 9:26 am
martelhooktool.com6/27/2014, 7:53 pm
Party Time -Big chip & dip bowl *PIC*6/27/2014, 7:12 pm
Flame Out - Pedestal Bowl *PIC*6/27/2014, 6:57 pm
Jennifer's award *PIC*6/27/2014, 5:37 pm
Oil drying times in the hotter/humid weather?6/27/2014, 4:54 pm
Pushing my envelope... *PIC*6/26/2014, 4:28 pm
Thanks, Robo!6/26/2014, 12:10 pm
Class of 2014!6/25/2014, 10:42 pm
Zentangle Inspired *PIC*6/25/2014, 9:33 pm
another OT heart health thing...6/25/2014, 6:34 pm
OT - Proud of my soon to be Eagle Scout!! *LINK*6/25/2014, 2:10 pm
PINGING Ellis6/25/2014, 9:05 am
Don't forget chat tonight 9:30 EDT6/25/2014, 8:57 am
OT what?6/25/2014, 2:06 am
Old tool6/24/2014, 11:25 pm
OT Low heart rate6/24/2014, 9:12 pm
Camera question -john Lucas6/24/2014, 6:45 pm
Not turning, but mind-blowing *LINK*6/24/2014, 5:09 pm
Finishing Qsn. *PIC*6/24/2014, 3:35 pm
overwhelmed with little stuff to do6/24/2014, 11:00 am
Big Tree Tools6/24/2014, 10:11 am
storing walnut oil6/23/2014, 9:29 pm
Mark Sfirri - Greatest turner ever...today *PIC*6/23/2014, 11:29 am
credit for a great bowl *PIC*6/23/2014, 1:37 am
Bowl wall thickness 6/21/2014, 9:37 pm
Awesome sounding lathe for sale in classifieds *NM* *LINK*6/21/2014, 4:54 pm
FREE WOOD6/21/2014, 11:22 am
final finishing question6/20/2014, 7:25 pm
fruit bowl6/20/2014, 2:17 pm
A different Sphere Jig *NM* *LINK*6/20/2014, 12:57 pm
Hannes "Quick Coring" Tool6/18/2014, 12:32 pm
Urns a different take6/18/2014, 8:54 am
My symposium pics6/17/2014, 10:09 pm
Segmented Turning6/17/2014, 7:21 pm
2014 Symposium and the Web...6/17/2014, 6:43 pm
Just back from the sawmill.. *PIC*6/17/2014, 6:27 pm
tool handle6/17/2014, 3:29 pm
2014 AAW Symposium Pictures/Video6/17/2014, 12:27 pm
OT: for you musical types *NM* *LINK*6/16/2014, 10:22 pm
more on South African jacaranda6/16/2014, 7:12 pm
New Jet 1221VS Lathe...Noisy.?6/16/2014, 5:42 pm
Symposium Updates??6/16/2014, 4:11 pm
Black Oak6/16/2014, 12:22 pm
New piece completed *PIC*6/15/2014, 3:28 pm
Opinions of sphere cutting jigs?6/15/2014, 2:53 pm
Cheap bowl lathe in Ovid, New York *LINK*6/15/2014, 10:45 am
spindle adapter6/14/2014, 11:26 pm
a motor for my next lathe *LINK*6/14/2014, 6:50 am
Magazine Scam6/13/2014, 5:31 pm
sharpening *LINK*6/13/2014, 12:35 pm
Best use of wood-Yield *PIC*6/12/2014, 9:47 pm
Turners aprons and shirts *LINK*6/12/2014, 6:13 pm
General 26020 Tool Rest Clamp6/12/2014, 12:23 pm
Anybody had any luck with Red Oak burl?6/12/2014, 12:06 pm
OT: (or is it?) Tim's Vermeer *LINK*6/12/2014, 9:35 am
Check out this site- incredible *LINK*6/12/2014, 6:33 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*6/11/2014, 5:01 pm
Is this real? Joe?6/11/2014, 1:54 pm
Bug help *PIC*6/10/2014, 7:34 pm
new WoW site Gallery not working?6/10/2014, 6:38 pm
Help - design for portable lathe bench6/10/2014, 6:52 am
The hearing aids and the turning dust6/9/2014, 9:26 pm
Saw dust sucked...outside *PIC*6/9/2014, 4:04 pm
Anyone used furnace air for Kiln Drying?6/9/2014, 10:25 am
Is This Legit?6/9/2014, 8:16 am
Free range woodturner 6/8/2014, 5:26 pm
AAW Symposium6/8/2014, 12:57 pm
Saw dust as mulch6/8/2014, 12:55 am
insurance at fairs and such6/5/2014, 4:03 pm
Myfamily.com WoW?6/5/2014, 3:53 pm
Way OT: Blog Post at National Geographic *LINK*6/5/2014, 1:38 pm
Designers:6/5/2014, 12:38 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*6/4/2014, 2:46 pm
Peters Valley Faculty Exhibit (and book) *LINK*6/4/2014, 2:31 pm
Summer closing in...6/4/2014, 2:08 pm
New Piece for Instant Gallery *PIC*6/4/2014, 12:08 pm
Deft alert.6/3/2014, 1:24 pm
One the fence about coming to Phoenix?6/3/2014, 11:39 am
The AAW POP Excellence Award *LINK*6/2/2014, 4:41 pm
Best use of wood, cutting diagram *PIC*6/2/2014, 12:28 pm
bowl coring systems6/2/2014, 2:13 am
I'm back6/1/2014, 6:43 pm
Best wishes, Betty...6/1/2014, 2:46 pm
Best use of wood *PIC*5/31/2014, 4:28 pm
[AD] Last chance to save at Klingspor's May Sale! *LINK*5/30/2014, 2:17 pm
Marbled Platter *PIC*5/30/2014, 8:31 am
hack a vaping e-cig to pyro pen?5/30/2014, 12:13 am
Turn, Turn , Turn5/29/2014, 7:52 pm
Who's coming to Phoenix?5/29/2014, 4:53 pm
cutting bits5/29/2014, 4:08 pm
overwelmingly white and male :) *LINK*5/29/2014, 3:08 pm
The Great egg cup race *PIC*5/28/2014, 9:39 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*5/28/2014, 4:31 pm
posted my one of my good turning buddies5/28/2014, 1:03 pm
OT Anyone tried buffing headlights????5/27/2014, 1:57 pm
Inhaling metal dust particles...5/26/2014, 9:38 pm
If your into cool cars *LINK*5/26/2014, 3:08 pm
back from Virginia5/26/2014, 11:13 am
Thank You! Happy Memorial Day!5/26/2014, 11:01 am
Safety - Risk or Certainty? *PIC*5/24/2014, 4:40 pm
Fastener name?5/24/2014, 10:42 am
Disaster Barely Avoided5/22/2014, 4:07 pm
Completed Pedestal Spindle repair and refinish *PIC*5/22/2014, 4:07 pm
New American Woodturner Editor5/21/2014, 10:53 am
Packing to head to Virginia Demos5/21/2014, 10:48 am
Redwood Burl Poacher Arrested and Charged5/21/2014, 7:25 am
*** SURVEY: THE IDES OF MAY ***5/21/2014, 7:25 am
Triton charger5/20/2014, 6:05 pm
AAW auctions on line *LINK*5/20/2014, 3:29 pm
99% hollower... *PIC*5/20/2014, 1:07 pm
Got a good accident story? *LINK*5/20/2014, 1:02 pm
Build the lathe OT5/20/2014, 12:20 am
Wood identification question *PIC*5/17/2014, 7:21 pm
Burl Poachers Nailed/Jailed *LINK*5/17/2014, 4:32 pm
Use for old Colored Pencils5/17/2014, 10:47 am
A little gloat *LINK*5/17/2014, 10:31 am
Thin spindle replacement project *PIC*5/16/2014, 10:45 pm
off center pendants *PIC*5/16/2014, 2:16 pm
Olive wood *PIC*5/15/2014, 10:45 pm
you gotta watch this 3 minutes in. fuuuny *NM* *LINK*5/15/2014, 4:12 pm
need to be turning but---5/15/2014, 3:34 pm
Don't Forget Turning Chat Tonight 9:30 Eastern5/14/2014, 4:47 pm
some day when I get really ambitious *NM* *LINK*5/14/2014, 4:24 pm
If I ever complain about aches and pains smack me. *LINK*5/14/2014, 4:00 pm
do you need a big bandsaw *NM* *LINK*5/14/2014, 9:03 am
Scam alert5/13/2014, 5:57 pm
Bocce set *PIC*5/13/2014, 11:26 am
Bowl and Balls *PICS* *PIC*5/13/2014, 11:07 am
Graeme Priddle Class - Gloat5/12/2014, 2:57 pm
Locust as a turning wood?5/12/2014, 11:16 am
Carving On Turning5/12/2014, 10:52 am
DeWalt 788 Vibration5/10/2014, 9:53 am
Keep shirt tail in5/9/2014, 8:51 pm
finish preservative *LINK*5/9/2014, 5:26 pm
Hey John Lucas5/9/2014, 2:04 pm
Using a drawbar: AAW Fundamentals video5/9/2014, 12:06 pm
Utah Symposium5/8/2014, 10:13 pm
USPS Shipping *LINK*5/8/2014, 7:34 pm
Wood ID Quiz *LINK*5/8/2014, 3:16 pm
Holly5/8/2014, 1:02 am
source for commercial large bowl blanks5/7/2014, 7:18 pm
Cindy Drozda vegetable bowl *NM* *LINK*5/7/2014, 7:18 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*5/7/2014, 5:41 pm
Room share available Phoenix5/7/2014, 2:52 pm
A little bowl I turned this Morning *PIC*5/7/2014, 2:37 pm
close enough to not be OT *LINK*5/7/2014, 1:38 am
Chainsaw question5/7/2014, 1:06 am
Ethylene Glycol O.T.5/6/2014, 1:41 pm
speed in turning5/6/2014, 12:49 pm
Ode to Mel bay *LINK*5/6/2014, 8:39 am
Faraday cage underwear *LINK*5/6/2014, 8:30 am
Minnesota demo 5/5/2014, 9:11 pm
Bowl from Black Willow *PIC*5/5/2014, 5:10 pm
Segmenting and spheres, kind of....5/5/2014, 3:03 pm
Output for Sunday, May, 4 *PIC*5/5/2014, 11:39 am
Vacation5/5/2014, 8:42 am
Broken ferrules on tools?5/5/2014, 8:34 am
Anti Fog solution5/4/2014, 11:47 pm
For those who turn urns5/4/2014, 10:03 pm
Turning Green Wood5/4/2014, 5:25 pm
OT Nz *LINK*5/4/2014, 11:55 am
Owners of Makita UC4030A electric chain saws...5/4/2014, 8:59 am
need so Ideas *PIC*5/4/2014, 8:26 am
Can someone please educate me?5/3/2014, 5:55 pm
Inspirational Video... *LINK*5/2/2014, 6:45 pm
Question to John Lucas about mirrors5/2/2014, 4:58 pm
new work *PIC*5/2/2014, 2:22 pm
Ancient Kauri the loop hole 5/2/2014, 2:11 am
Collection Plates5/1/2014, 9:53 am
A huge thanks to the Robo Hippy5/1/2014, 1:37 am
saw a oneway 2436 on craigslist4/30/2014, 10:50 pm
Sanitizing the breathing tube4/30/2014, 7:32 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*4/30/2014, 3:30 pm
Barrel hinges on a turned box?4/29/2014, 3:26 pm
Any body else save saw dust *PIC*4/29/2014, 11:55 am
Ebony and yellow heart pill box *PIC*4/29/2014, 11:37 am
plunger *PIC*4/29/2014, 7:23 am
Compass Rose salad Bowl *PIC*4/28/2014, 8:06 pm
Ingredient Bowl *PIC*4/28/2014, 4:24 pm
Shipping Green Turning Blanks *LINK* *PIC*4/28/2014, 11:54 am
I was watching Mirror Mirror last night4/28/2014, 7:13 am
calligraphy pen4/28/2014, 12:16 am
Crepe Myrtle4/27/2014, 11:59 pm
Item possible for John Lucas et al.4/27/2014, 6:52 pm
Anybody Interested in a fiber optic Cable?4/27/2014, 6:43 pm
Butterfly key4/27/2014, 1:49 pm
Now is the best time of year to remove the bark, 4/26/2014, 11:58 pm
something completely different (Tormek related)4/26/2014, 9:30 pm
Cherry bowl finish4/26/2014, 7:13 pm
Rustic rocking chair4/26/2014, 6:46 pm
Bowl orientation on Birch log?4/26/2014, 5:13 pm
That One Tool4/26/2014, 1:38 pm
Hand Sharpening Carbide Inserts4/26/2014, 8:11 am
Pendant construction *PIC*4/25/2014, 9:56 am
robo hippy's video sanding&finishing4/25/2014, 8:48 am
Compass Rose for Segmented Bowl bases *PIC*4/25/2014, 8:46 am
MisterGlue4/24/2014, 9:21 pm
Tool rest position4/24/2014, 1:39 pm
Pendants *PIC*4/24/2014, 7:28 am
Drum Stick Info.4/23/2014, 10:49 pm
My new CRV was owned by a little old lady *NM* *LINK*4/23/2014, 10:36 pm
OT Spring is near4/23/2014, 8:54 pm
Shows4/23/2014, 7:12 pm
Curved tool rest for bowls4/23/2014, 5:30 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*4/23/2014, 3:27 pm
3 new segmented bowls *PIC*4/23/2014, 6:58 am
TWICE TURNED BOWL By Reed Grey4/23/2014, 12:13 am
latest turnings *PIC*4/22/2014, 10:34 pm
Two more Questions,Please *PIC*4/22/2014, 8:55 pm
Wood I.D. *PIC*4/22/2014, 7:09 pm
Easier way to load logs into truck. *LINK*4/22/2014, 11:21 am
Good customer service4/22/2014, 9:55 am
Well it's 8 Am and I've already turned 2 projects4/22/2014, 9:18 am
OT: Need to split some logs? Check this out. *LINK*4/21/2014, 9:27 pm
Penn State Industries4/21/2014, 9:06 pm
On cutting and getting a good surface...4/21/2014, 4:09 pm
how do you store your logs?4/21/2014, 2:53 pm
Multi Axis box *PIC*4/20/2014, 11:07 pm
More Faceplates and Glue Blocks vs Chucks & Tenons *PIC*4/20/2014, 6:07 pm
Walnut carafe/mixed media *PIC*4/20/2014, 2:41 am
For you popular demonstrators out there. *LINK*4/20/2014, 1:05 am
Natural edge Cedar Bowl *PIC*4/19/2014, 10:51 pm
Egg production Finally over *PIC*4/19/2014, 10:10 pm
reattaching Stubby cut-off switch4/19/2014, 7:02 pm
At what point do you dress your wheel?4/19/2014, 10:01 am
How to determine size of stand for glass vase4/19/2014, 9:05 am
high speed engravers *LINK*4/19/2014, 8:48 am
grinder choice4/19/2014, 8:22 am
Lowes purchase rant, long4/19/2014, 12:12 am
Happy Easter! *PIC*4/18/2014, 8:36 pm
Ellis,4/18/2014, 6:05 pm
Lathe Duplicator using router4/18/2014, 5:33 pm
[AD]*NEW* Jamieson Signature Bowl Gouge *LINK*4/18/2014, 3:50 pm
Thread size4/18/2014, 10:26 am
Bench Grinder4/18/2014, 2:31 am
A few rings, and steam-bent coil spring *LINK*4/17/2014, 8:19 pm
question for Terry Scott4/17/2014, 3:54 pm
Club "responsibilities" question?4/17/2014, 11:49 am
Band saw blades: hook or alternate?4/17/2014, 8:41 am
Royal Easter show 4/17/2014, 6:29 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*4/16/2014, 4:06 pm
Wood Day Ashville NC4/16/2014, 8:38 am
Quick question on Oneway rotary adaptor4/15/2014, 8:08 pm
Loading logs onto a trailer, single-handed. 4/15/2014, 6:26 pm
[AD] Peter Korn Lecture and Book Signing *LINK*4/14/2014, 6:01 pm
Canadian police chase *LINK*4/14/2014, 4:28 pm
LAX area turner wood alert4/13/2014, 10:39 pm
this is how I unload my logs, don't you *NM* *LINK*4/12/2014, 10:26 am
Between Center qsn. for Lyle jamisen4/12/2014, 1:17 am
shop done for now *PIC*4/11/2014, 6:03 pm
Looking for screw chuck4/11/2014, 9:15 am
Origin of the term "Banjo" on a lathe?4/11/2014, 4:34 am
Life is Good4/10/2014, 7:08 pm
Burning lines on Face Grain *PIC*4/10/2014, 6:35 pm
Marker Colored Eggs *PIC*4/10/2014, 6:22 pm
Easter Eggs??? *PIC*4/10/2014, 6:17 pm
Band Saw stalling under the load4/10/2014, 12:00 pm
setting up a new shop *PIC*4/10/2014, 8:24 am
wood storage on my porch4/10/2014, 8:12 am
Red cedar4/9/2014, 10:39 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*4/9/2014, 4:41 pm
2016 AAW symposium4/9/2014, 10:14 am
waterproof glue4/9/2014, 7:22 am
waterproof glue4/9/2014, 7:20 am
One more for now *PIC*4/7/2014, 3:28 pm
couple of boxes *PIC*4/7/2014, 3:23 pm
Spoon and Spatula Set *PIC*4/7/2014, 3:14 pm
Need a good one4/7/2014, 10:48 am
Unfolding a 22 foot band saw blade *LINK*4/7/2014, 5:33 am
Finish for dishes4/6/2014, 10:00 pm
Easter eggs *PIC*4/6/2014, 9:43 pm
Twice turned bowl finish cuts4/6/2014, 1:37 pm
An odd acrylic finish4/6/2014, 10:47 am
iPhone apps4/3/2014, 10:44 pm
Turning wooden wedding rings?4/3/2014, 9:56 pm
Arrowmont *LINK*4/3/2014, 2:38 pm
URNS4/2/2014, 9:32 pm
Update on Face-shield ratings.4/2/2014, 7:45 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*4/2/2014, 4:29 pm
Bowl sanding and Walnut oil4/2/2014, 12:07 pm
Giving up my truck4/2/2014, 8:22 am
SWAT shirt got a lot of attention4/2/2014, 8:00 am
Check out this chain saw accident *NM* *LINK*4/1/2014, 10:15 pm
Why modern lathes have REVERSE...the real story..4/1/2014, 2:00 pm
WD-404/1/2014, 1:40 pm
DRAFT Multi Axis Primer *LINK*4/1/2014, 2:23 am
WD-403/31/2014, 11:01 am
Totally Turning/NWA Showcase 20143/31/2014, 12:02 am
twisted goblet. *PIC*3/29/2014, 10:06 am
Wooden hats *LINK*3/29/2014, 9:13 am
really big gun drill *LINK*3/28/2014, 3:31 pm
Delta 46-7003/28/2014, 11:35 am
Wood dealers near Eureka, CA3/28/2014, 10:08 am
Note from Russ on Bowl Bottoms3/27/2014, 8:46 pm
A visit with the RoboHippy3/27/2014, 6:08 pm
Lathe found on local CL3/27/2014, 10:37 am
***SURVEY: THE IDES OF MARCH*** *LINK*3/27/2014, 8:21 am
Visit with Wally and Jane Dickerman *PIC*3/27/2014, 12:32 am
EOG Grant3/26/2014, 6:38 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*3/26/2014, 5:09 pm
Roughing faceplate surface?3/26/2014, 1:05 pm
Threading jig ?3/26/2014, 9:52 am
Morse code box *PIC*3/24/2014, 4:48 pm
cleaning up torn grain under threaded lid *PIC*3/24/2014, 2:05 pm
Art's birthday box *PIC*3/24/2014, 1:39 am
Oneway versa mount: any opinion?3/23/2014, 10:09 pm
moving a 300lb compressor3/23/2014, 7:36 am
Oil finish shelf life?3/22/2014, 3:19 pm
Harbor Freight Mini metal lathe?3/22/2014, 12:15 am
Drilling out pith in hollowforms/urns/etc.3/21/2014, 6:56 pm
Phoenix roommate needed, female3/21/2014, 3:03 pm
General sharpening questions3/20/2014, 5:43 pm
Turning to see at Branson MO?3/20/2014, 3:10 pm
30 Minutes Till SPRING!3/20/2014, 12:33 pm
Don't Forget Turning Chat Tonight 9:30 Eastern3/19/2014, 5:42 pm
'Nuther McNaughton Question3/19/2014, 9:46 am
Ha! *PIC*3/18/2014, 4:34 pm
Old Kelton coring guide question *PIC*3/18/2014, 10:43 am
woodturning demos and TSA3/17/2014, 1:51 pm
Gotta make me a demo gouge like this *NM* *LINK*3/17/2014, 11:24 am
Olive Wood3/16/2014, 10:45 pm
bug vs. bug to save the hemlocks *LINK*3/16/2014, 9:43 pm
Nice new pile of timber *NM*3/16/2014, 9:16 am
Netting to stop shavings *LINK*3/16/2014, 8:33 am
Good woods for Hand chasing-what I've found3/15/2014, 5:37 pm
Earth to Wally Dickerman3/15/2014, 3:56 pm
Double Spindle Steady *PIC*3/15/2014, 10:52 am
This is seriously cool *NM* *LINK*3/14/2014, 4:33 pm
Turned Walnut pedestal table3/14/2014, 12:08 pm
source fo vacuum gauge?3/14/2014, 11:25 am
Holly turning green, bleach?3/13/2014, 10:14 pm
Making a baton3/13/2014, 7:23 pm
Demonstrators asking the masses for help?3/13/2014, 6:40 pm
Doing a threading Demo next week.3/13/2014, 6:47 am
well this is fun. Don't speak German but *NM* *LINK*3/12/2014, 8:54 pm
Let there be light3/12/2014, 6:40 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*3/12/2014, 6:11 pm
Question: Gear Shift Knob for 2008 Mustange.3/11/2014, 9:20 pm
I survived!3/11/2014, 5:52 pm
aluminum pipe for dust collector3/11/2014, 10:33 am
Dick Gerrard is okay3/11/2014, 10:25 am
WOW3/10/2014, 5:19 pm
Derpy Birds *PIC*3/9/2014, 10:23 pm
Question on turning a small rose vase.3/9/2014, 8:32 pm
4,000 year old woodturnings discovered in Eng3/9/2014, 7:25 pm
I found a video on how to make removable handles3/9/2014, 11:21 am
Found a place for my art3/9/2014, 10:27 am
revisiting old work3/9/2014, 10:16 am
[AD] Cindy Drozda Woodturning *LINK*3/9/2014, 7:28 am
A note to the Captain3/8/2014, 11:11 pm
A note from the cockpit3/8/2014, 10:05 pm
New Maple Jar *PIC*3/8/2014, 9:06 am
First Alert Face shield3/7/2014, 7:54 am
I think there is a turning here somewhere *LINK*3/6/2014, 2:59 pm
koa wood3/6/2014, 2:00 pm
Redwood Burl Poachers *LINK*3/6/2014, 1:33 pm
We all need to take Judo as we get older3/6/2014, 8:38 am
Turning Wearing Gloves3/5/2014, 11:27 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*3/5/2014, 6:22 pm
Bowl with a hole *PIC*3/5/2014, 3:25 pm
redwood burl poaching *LINK*3/5/2014, 2:37 pm
Who is planning to go to Totally Turning?3/5/2014, 2:14 pm
Lathe recommendation3/4/2014, 8:08 pm
Olympic inspiration *PIC*3/3/2014, 4:28 pm
Lesson Learned3/3/2014, 7:24 am
Off Lathe Sphere decorating Set Up *PIC*3/2/2014, 6:54 pm
green wood aggravation *PIC*3/2/2014, 6:06 am
Jimmy Clewes Demo3/1/2014, 6:40 pm
moving heavy machinery3/1/2014, 3:16 pm
Chatoyancy3/1/2014, 9:42 am
Popcorn bowl *PIC*2/28/2014, 10:16 pm
Hands-on with Keith2/28/2014, 8:24 pm
Trees really are amazing2/28/2014, 1:06 pm
John Jordan skew: bevel up or bevel down?2/28/2014, 11:37 am
While awaiting a replacement VFD ....... *PIC*2/28/2014, 10:46 am
a great little skew practice project *NM* *LINK*2/28/2014, 4:02 am
Chuck Jones spalted pecan *PIC*2/27/2014, 8:23 pm
Trying to hone2/27/2014, 5:13 pm
Heart Box *PIC*2/26/2014, 9:33 pm
Off to Maui2/26/2014, 9:24 pm
'Travel' Lathe2/26/2014, 6:31 pm
Picture sizing again2/26/2014, 5:54 pm
Sharpening video2/26/2014, 4:37 pm
Oh the temptation!!!!!!!!!!2/26/2014, 3:46 pm
Don't Forget Turning Chat Tonight 9:30 Eastern2/26/2014, 8:57 am
Good News for Deft2/25/2014, 1:14 pm
problem solved, at least for now (long)2/24/2014, 10:58 pm
Deft lacquer Availability In a lowe's 2/24/2014, 9:28 pm
What's your favorite turning "Accesory"2/23/2014, 5:32 pm
Lathe Base idea??2/23/2014, 4:28 pm
Turning and Fibonacci?2/23/2014, 12:56 pm
Trend Airsheild Pro2/23/2014, 11:44 am
Routed Rim #2 - Stopped Groves *PIC*2/23/2014, 11:03 am
Personality Plates *PIC*2/21/2014, 2:24 pm
Somerset Woodworking show2/21/2014, 12:14 pm
German spindle gauge, any ecperience?2/20/2014, 8:16 pm
a foot-powered lathe is used in here *LINK*2/20/2014, 3:55 pm
a new look for Dick Hines *NM* *LINK*2/20/2014, 9:51 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*2/19/2014, 5:14 pm
OT: Handiwork, Desk2/19/2014, 4:10 pm
Update for My Turning Family2/19/2014, 10:20 am
Deft2/18/2014, 5:46 pm
Trying something new...(with success...and not) *PIC*2/18/2014, 11:25 am
You turned a WHAT? *PIC*2/17/2014, 8:29 pm
What kind of scale2/17/2014, 12:59 am
Do you measure MC?2/16/2014, 12:48 pm
Router Mount Version 2 *PIC*2/16/2014, 9:06 am
another way of wrapping for hollowing *PIC*2/16/2014, 12:34 am
how do you make template of a large turning? *PIC*2/15/2014, 11:17 pm
Mounting Green Wood Bowl's2/15/2014, 5:04 pm
20" sanding disk *PIC*2/15/2014, 2:17 pm
AAW Phoenix sympsoium2/15/2014, 11:15 am
Never ceases to amaze me2/15/2014, 9:56 am
OT: Snow Blower *LINK*2/15/2014, 8:33 am
Lathe Duplicater *LINK*2/14/2014, 9:30 pm
Bicycle powered lathe in the Dominican Republic2/14/2014, 8:48 pm
Empty Bowls *PIC*2/14/2014, 6:44 pm
bowl design the outside detail *PIC*2/14/2014, 9:32 am
Processing Burl2/13/2014, 9:40 pm
This is incredible *NM* *LINK*2/13/2014, 4:56 pm
Oliver lathe is ready to ship *PIC*2/13/2014, 3:23 pm
Watch/clock Inserts2/13/2014, 10:10 am
Don't Forget Turning Chat Tonight 9:30 Eastern2/12/2014, 6:17 pm
How are y'all doing sown south?2/12/2014, 1:25 pm
I don't turn many bowls *PIC*2/11/2014, 9:46 am
How can I weight a lathe2/10/2014, 3:28 pm
For Clay Foster-hokey pokey :)2/10/2014, 3:00 pm
Quick, easy, cheap (my three faves) club project *PIC*2/10/2014, 8:21 am
More Designing Multi Axis Pieces in Virtual 3D *PIC*2/10/2014, 3:29 am
Woodpecker Holly2/9/2014, 9:23 pm
Need help to figure out *PIC*2/8/2014, 5:16 pm
really really large goblet *LINK*2/8/2014, 3:37 pm
First try with router mount *PIC*2/8/2014, 2:19 pm
Excellent video on coring *LINK*2/8/2014, 1:08 pm
No turning for me 2/8/2014, 12:34 pm
Blackwood Stopper *PIC*2/7/2014, 11:23 pm
Vise for bowl detailing2/7/2014, 10:32 pm
Oil and Vinegar Spout2/7/2014, 9:06 pm
Price of lumber2/7/2014, 9:51 am
Inexpensive DIY Laser Depth Gauge *PIC*2/7/2014, 4:31 am
70's Pre Scroll Chucks 6-in-1 Metal Chuck *PIC*2/7/2014, 3:23 am
Beverage Related *PIC*2/6/2014, 8:38 pm
Neighbor Bowls *PIC*2/6/2014, 8:37 pm
Calling John Lucas...2/6/2014, 4:37 pm
Her is something to get you guys rich2/6/2014, 12:56 pm
BATHTUB! *LINK*2/6/2014, 9:47 am
O.T. Credit Card Risk2/6/2014, 8:28 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*2/5/2014, 6:02 pm
Clearly, we are doing it wrong2/5/2014, 5:42 pm
What are you doing?2/5/2014, 4:10 pm
Turner's helmet *PIC*2/5/2014, 1:21 pm
double neck guitar *NM* *LINK*2/4/2014, 2:19 pm
Winged cherry triangle lidded box/bowl? *PIC*2/3/2014, 3:45 pm
Lidded Boxes with Finials2/3/2014, 1:23 pm
I SHOULD HAVE BEEN TURNING....2/3/2014, 9:52 am
I had to try *PIC*2/2/2014, 6:55 pm
Precision Router Mount on the Lathe *PIC*2/2/2014, 3:58 pm
Rising Tide *PIC*2/2/2014, 12:27 pm
Great TAW symposium2/2/2014, 12:15 pm
Don Pencil products1/31/2014, 5:26 pm
wire to burn rings1/31/2014, 1:48 pm
TAW symposium. Anyone going 1/30/2014, 8:19 am
WAAAY OT -- Supernova Way Out There! *PIC*1/29/2014, 11:58 pm
"Rising" submission *PIC*1/29/2014, 8:52 pm
"Ceremony" exhibit piece *PIC*1/29/2014, 8:47 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*1/29/2014, 6:01 pm
updated my info - things are good now1/29/2014, 1:25 pm
Mr Pebodies way back machine1/29/2014, 11:04 am
OT Starting salary1/29/2014, 12:01 am
posting pics1/28/2014, 2:13 pm
Need to prep bowl blanks anyone?1/28/2014, 8:25 am
New Piece *PIC*1/27/2014, 7:05 am
Putting finish in the cold weather1/26/2014, 12:07 am
New Bowl *PIC*1/25/2014, 2:47 pm
You've seen the table... now how it works!1/24/2014, 5:36 pm
Where in Texas?1/24/2014, 9:03 am
I have another lathe *PIC*1/24/2014, 5:04 am
Way OT, Pennsylvania law1/23/2014, 11:22 pm
Sphere jig on a 24" riser.1/23/2014, 9:04 pm
Updated webpage *LINK*1/23/2014, 1:09 pm
Today, Teknatool USA1/23/2014, 11:12 am
Running lathe electronics off generator power1/22/2014, 9:16 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*1/22/2014, 6:55 pm
I now have a variable angle drill bit. *PIC*1/22/2014, 4:19 pm
The future of instructional video1/22/2014, 4:17 pm
bowl gouge shapes1/22/2014, 10:36 am
handle comparison1/22/2014, 10:33 am
Looking for someone to do some woodturning1/21/2014, 11:52 am
WoodWorking Shows *PIC*1/21/2014, 8:34 am
Hibernation1/20/2014, 6:22 pm
ornaments1/20/2014, 12:38 pm
A response from Dr. Spalt....1/20/2014, 9:08 am
Tops For Project Village Africa *PIC*1/19/2014, 4:46 pm
Trip west1/18/2014, 9:51 pm
***SURVEY: THE IDES OF JANUARY*** *LINK*1/18/2014, 1:29 pm
Red Cedar 1/17/2014, 8:32 pm
tomorrow demo location *LINK*1/17/2014, 3:34 pm
Woodcraft Turning Class!!1/17/2014, 3:04 pm
Bennett Tool Handle status1/17/2014, 10:01 am
Some New Copper Lidded Boxes *PIC*1/16/2014, 11:25 pm
A New Addition Sojourner *PIC*1/16/2014, 11:15 pm
Spalting wood1/16/2014, 9:09 pm
absolutely awsome *NM* *LINK*1/16/2014, 7:49 pm
Union Graduate short bed Lathe for sale1/16/2014, 1:34 pm
8" Grinder Wheel1/16/2014, 1:58 am
Bowling Pins for turning?1/15/2014, 11:28 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*1/15/2014, 5:52 pm
Lost a tree, gained some wood *PIC*1/15/2014, 4:54 pm
Hit my cold fingers1/15/2014, 4:53 pm
Big bowl to end the year - finished! *PIC*1/15/2014, 3:56 pm
Turning Spheres -- No Math, No Jig *LINK*1/15/2014, 12:22 pm
10 years ago...... *LINK*1/14/2014, 12:30 pm
Your favorite segmented bowl/vase software1/14/2014, 11:12 am
As seen on TV....Nesting dolls1/13/2014, 7:30 pm
Job Opening: Editor of American Woodturner1/13/2014, 5:40 pm
Video: Working with woodturner's tape1/13/2014, 2:30 pm
Turning a Walnut Pedestal on General Spindle lathe1/11/2014, 4:59 pm
Part for Nova and ? about delivery services1/11/2014, 7:44 am
Michael Dresdner Chat1/10/2014, 2:11 pm
Just Playing With My Balls *PIC*1/10/2014, 12:34 pm
EggBot egg *PIC*1/9/2014, 11:42 am
***Guest Chat TONIGHT-- Michael Dresdner*** *LINK*1/9/2014, 8:27 am
inexpensive photo background paper *PIC*1/8/2014, 7:18 pm
West System epoxy 1/8/2014, 5:43 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*1/8/2014, 4:55 pm
If you want to turn big... *LINK*1/8/2014, 7:22 am
Finding Thread Chasers1/7/2014, 1:55 pm
Dust Helmet Advice1/7/2014, 12:42 pm
-6 here *PIC*1/7/2014, 7:42 am
heated tool handles.1/6/2014, 9:48 am
A VFD question!1/6/2014, 9:28 am
OK I'm confused1/6/2014, 8:42 am
Long Handled Scoop *PIC*1/5/2014, 7:53 pm
Problem Found! *PIC*1/5/2014, 3:37 pm
OT -Two good looking chicks *PIC*1/5/2014, 11:05 am
preserving the original color of wood *PIC*1/4/2014, 11:04 pm
Box Threading1/4/2014, 10:00 pm
***Special Guest Chat -- Michael Dresdner*** *LINK*1/4/2014, 5:12 pm
Parting Tool?1/4/2014, 2:19 pm
need coloring advice1/4/2014, 2:27 am
What to do now?1/3/2014, 2:23 pm
Banjo Question...sorta'1/3/2014, 1:24 pm
fantastic resource1/3/2014, 1:04 pm
Broke tool yarn bowl *PIC*1/3/2014, 12:57 pm
Tool Rest Question1/3/2014, 9:02 am
Banjo *LINK*1/2/2014, 1:26 pm
GO GREEN!! *NM*1/1/2014, 9:41 pm
where has WoW gone now?1/1/2014, 9:22 pm
Don't Forget Turning Chat Tonight 9:30 Eastern1/1/2014, 8:41 pm
Worth Considering?1/1/2014, 1:03 pm
What is the CBN Wheel Advantage?12/31/2013, 4:32 pm
More newbie questions!12/31/2013, 2:48 pm
Variable speed?12/30/2013, 10:15 am
Who needs a lathe?12/29/2013, 6:42 pm
Wall bowls *PIC*12/29/2013, 11:30 am
Long but Fun day12/28/2013, 6:22 pm
McNaughton Center Saver12/28/2013, 3:14 pm
Punky problem with Ambrosia Maple12/28/2013, 2:33 pm
Old McNaughton knives12/28/2013, 8:49 am
Big Bowl to end the year. *PIC*12/27/2013, 10:15 pm
woodturning mag12/27/2013, 7:30 pm
Sorby Tools?12/27/2013, 1:12 pm
WOW upload problem fixed yet?12/27/2013, 3:35 am
Christmas tree turning and carving *LINK*12/26/2013, 9:54 pm
Is 'AR Liberty' still in business??12/26/2013, 12:05 pm
Question for New Zealand Turners12/26/2013, 10:20 am
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/25/2013, 1:10 pm
Merry Christmad12/25/2013, 9:13 am
't is the night before Christmas.....12/24/2013, 7:26 pm
Rattle pot *PIC*12/24/2013, 2:58 pm
Lathe Tools?12/24/2013, 1:02 pm
Merry Christmas!!!!!!12/24/2013, 10:23 am
What is a good power sander for sanding ...12/24/2013, 10:19 am
too rest shapes12/24/2013, 6:38 am
Last mirror for 2013 *PIC*12/23/2013, 7:08 pm
a fun piece I had forgotten about *PIC*12/23/2013, 9:50 am
DVr 2024 ? *PIC*12/23/2013, 5:23 am
Tool Rest Question12/22/2013, 5:56 pm
Can someone describe turning bangles?12/22/2013, 1:44 pm
Tops and tools *PIC*12/22/2013, 10:02 am
I'll try not to be too gushy12/22/2013, 9:53 am
need a motor to build a bowl lathe :) *NM* *LINK*12/22/2013, 9:32 am
Attn: Mssrs. Riggs or Simmons12/22/2013, 6:48 am
Plywood box mirror *PIC*12/21/2013, 8:45 pm
Happy solstice!12/21/2013, 5:02 pm
Bottle Stopper Question12/21/2013, 4:57 pm
Holiday greetings *PIC*12/20/2013, 2:03 pm
Shop cleaning12/20/2013, 1:13 pm
good chatter work video *LINK*12/20/2013, 7:19 am
still playing with sharpening *PIC*12/20/2013, 6:50 am
Last work day tomorrow!!!!!!!!12/19/2013, 9:29 pm
Any updates opn the Hall Effect/strobe systems?12/19/2013, 4:05 pm
looking for a jet 1642 or powermatic 322012/18/2013, 11:25 pm
Glue for acrylic12/18/2013, 7:53 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/18/2013, 5:57 pm
That Jimmy Clewes class is paying off... *PIC*12/18/2013, 4:59 pm
Thread Chasing Mesquite12/18/2013, 2:19 pm
Working on a Christmas present *PIC*12/18/2013, 1:36 pm
Coring DVD12/17/2013, 7:07 pm
Price for a used lathe12/17/2013, 3:50 pm
The power of crowd sourcing12/17/2013, 3:48 pm
Egg ornaments *PIC*12/17/2013, 1:11 pm
was going through my old bookmarks and found this *NM* *LINK*12/17/2013, 12:05 pm
Selling Maple Burl Bowl *PIC*12/16/2013, 10:43 pm
Somebody seeking turned bowl help *LINK*12/16/2013, 8:48 pm
ot you gotta see this movie if your over 50 *LINK*12/16/2013, 4:53 am
wow nobodys up at 3:3012/16/2013, 4:30 am
speaking of glue...12/15/2013, 4:04 pm
New Scoops *PIC*12/15/2013, 1:55 pm
Yarn Bowls *PIC*12/15/2013, 9:10 am
Does anyone know if 12/14/2013, 9:42 pm
problem with wc site12/14/2013, 6:24 pm
Ikebana Inspired Idea *PIC*12/14/2013, 2:27 pm
DVR2024 returns12/14/2013, 7:41 am
Fair price for used Jet 1642 1.5 HP Lathe12/13/2013, 10:13 pm
new mirror *PIC*12/13/2013, 4:14 pm
Pendants *PIC*12/13/2013, 1:06 pm
Update on Don Pencil order12/13/2013, 10:58 am
Anyone tried this product for UV protection *NM* *LINK*12/13/2013, 7:52 am
Sorby spiraling tool query12/12/2013, 8:34 pm
funny video I haven't seen before *NM* *LINK*12/12/2013, 7:43 am
Vacuum pump ??12/11/2013, 11:00 pm
Tamarack Tree12/11/2013, 10:36 pm
A little gloat *PIC*12/11/2013, 10:32 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/11/2013, 6:07 pm
Broken bowl gouge *PIC*12/11/2013, 2:51 pm
Wireless PA system?12/11/2013, 8:20 am
Thinning Epoxy12/10/2013, 6:26 pm
Latest *PIC*12/10/2013, 3:30 pm
***GUEST CHAT TONIGHT :: MEGAN FITZPATRICK*** *LINK*12/10/2013, 9:45 am
Tai Chi and turning12/9/2013, 2:58 pm
Hollowing tool advice12/9/2013, 12:47 pm
I am so jealous - John Lucas at Arrowmont12/9/2013, 11:08 am
WoodCentral Secret Santa12/9/2013, 7:48 am
Tops *LINK* *PIC*12/8/2013, 11:34 pm
OT: Arial Tree Trimming (you won't believe this) *LINK*12/8/2013, 9:07 pm
2014 WGW Holiday Toys for Tots event *PIC*12/8/2013, 5:57 pm
How to turn threads?12/8/2013, 5:32 pm
Broadaxe, Treadle Lathe and More=Rocking Chair..12/8/2013, 5:16 pm
Year end marketing reflection12/8/2013, 12:59 pm
Quick & easy gift project *PIC*12/7/2013, 10:34 am
Turning Hemlock?12/6/2013, 9:36 pm
Three time master craftsman OT *PIC*12/6/2013, 7:34 pm
Manzanita Burl *PIC*12/6/2013, 6:45 pm
Payback *PIC*12/6/2013, 3:33 pm
New Magnolia Chalis *PIC*12/4/2013, 9:42 pm
Don't Forget Turning Chat Tonight 9:30 Eastern *NM*12/4/2013, 8:42 pm
Goncalo Alves12/3/2013, 4:32 pm
Why Upright? (and Stabile) *PIC*12/3/2013, 3:49 pm
Visiting some ole' friends12/3/2013, 1:54 pm
this man in inventive *LINK*12/3/2013, 1:05 pm
Getting ready for Christmas *PIC*12/2/2013, 10:27 am
turning supplies at your door in 30 minutes *LINK*12/2/2013, 7:59 am
Don Pencil products12/1/2013, 9:36 pm
Elm available12/1/2013, 1:02 pm
chefware kits chisels *PIC*11/30/2013, 7:41 pm
new toy *PIC*11/30/2013, 7:33 pm
Out the door today! *PIC*11/30/2013, 4:32 pm
OT - Recommendations for an Oscillating Multi-Tool11/30/2013, 1:26 pm
OT - anyone have an ipad4 and can u chat?11/29/2013, 10:11 pm
Source for these boxes?11/29/2013, 7:09 pm
Lathe Selection11/29/2013, 4:20 pm
Turkey11/29/2013, 3:04 pm
[AD] General's Fall/Winter Sale! *LINK*11/29/2013, 12:35 am
Axminster Chucks and Lee Valley *PIC*11/28/2013, 9:49 am
Happy Thanksgiving, folks!11/28/2013, 8:23 am
A couple of new segmented bowls *PIC*11/27/2013, 10:23 pm
Don't Forget Turning Chat Tonight 9:30 Eastern11/27/2013, 8:49 pm
Something I have never seen *NM* *LINK*11/27/2013, 4:42 pm
Its not the Wawona Sequoia *PIC*11/27/2013, 11:34 am
Saving and storing wood11/27/2013, 10:35 am
Why the need to create11/26/2013, 5:00 am
Pepper Mill Recommendation11/25/2013, 10:51 pm
Mini-Flower Vase *PIC*11/25/2013, 6:46 pm
Free wood? Why, yes thank you... *PIC*11/25/2013, 2:03 pm
Second turning on a deep natural edge bowl11/25/2013, 11:55 am
hollowing tools11/25/2013, 11:05 am
Porch Post decorations *PIC*11/25/2013, 11:05 am
Need suggestions/opinions *PIC*11/24/2013, 8:21 pm
hollowing tools11/24/2013, 4:51 pm
bird houses11/24/2013, 4:43 pm
Lazer pointer dilemma11/24/2013, 12:04 pm
Looking for a solution11/23/2013, 10:21 pm
finishing blend11/23/2013, 3:27 pm
question about WBP11/22/2013, 9:26 pm
Tree Ornaments *PIC*11/22/2013, 4:21 pm
PowerMatic Faceplates11/22/2013, 3:41 pm
Lyle, I am using your bar,11/22/2013, 2:17 pm
Glue block process11/22/2013, 10:04 am
WoodCut Mill Drill11/21/2013, 5:13 pm
Ot the next Tommy Emmanuel *NM* *LINK*11/21/2013, 7:28 am
Don't Forget Turning Chat Tonight 9:30 Eastern11/20/2013, 8:49 pm
Ginkgo Nocturne *PIC*11/20/2013, 7:36 pm
John, how was your trip to Asheville?11/20/2013, 5:15 pm
Darning Egg *PIC*11/20/2013, 3:19 pm
tree carving link *LINK*11/20/2013, 1:41 pm
Walnut knitting bowl *PIC*11/20/2013, 12:29 pm
Totally Turning/Showcase 2014 *LINK*11/20/2013, 9:57 am
Fast Bird11/19/2013, 9:21 pm
Don't believe I could do this on my mini lathe *NM* *LINK*11/19/2013, 3:13 pm
Gift for my former boss *PIC*11/19/2013, 12:12 pm
finish saver *PIC*11/19/2013, 12:09 pm
New John Lucas Project Article *LINK* *PIC*11/19/2013, 11:17 am
Newer Multi Axis piece *PIC*11/19/2013, 8:44 am
Picture Posted NOT Picture Seen After Posting11/19/2013, 2:25 am
OT tornado aftermath in Washington, Il *LINK*11/18/2013, 9:20 pm
Box Elder ~PiC~11/17/2013, 9:43 pm
How Far Do You Stray From The Familiar?11/17/2013, 9:05 pm
CA glue brands11/17/2013, 7:31 am
OT) Metal clay, print your own hardware. *LINK*11/16/2013, 3:10 am
Cleaning chuck11/15/2013, 8:01 pm
Anybody build prototypes11/14/2013, 9:41 am
going through Ashville Saturday11/14/2013, 9:38 am
Video of a lathe accident *LINK*11/14/2013, 9:04 am
I guess few of my work11/14/2013, 3:29 am
New turning *PIC*11/13/2013, 8:44 pm
Premature polymerization: another solution? *PIC*11/13/2013, 6:06 pm
Don't Forget Turning Chat Tonight 9:30 Eastern11/13/2013, 5:04 pm
Few of my turnings11/13/2013, 2:06 pm
YouTube Changed11/13/2013, 12:13 pm
Remotes for dust collector and air compressor *PIC*11/12/2013, 5:54 pm
Glue Block question11/12/2013, 2:36 pm
Wood Gloat -- Part 1 *PIC*11/11/2013, 10:28 pm
how do u sand a turning on a stationary lathe11/11/2013, 5:48 pm
Montpelier, VT bound... 11/10/2013, 10:19 pm
Mineral oil at $1.50 a pint11/10/2013, 6:32 pm
working on a christmas project.11/10/2013, 5:13 pm
Improve your techniques *LINK*11/10/2013, 4:34 pm
What happened to the Bedan???11/10/2013, 1:57 am
grinding wheel replacement11/9/2013, 4:55 pm
North Carolina symposium11/9/2013, 4:32 pm
Why I wear gloves rough turning11/9/2013, 8:31 am
Honey Locust ~PIC~11/8/2013, 10:06 pm
Skew Sharpening11/8/2013, 9:21 am
Freeze It - SEE It *PIC*11/7/2013, 2:43 pm
2015 Symposium in Pittsburgh...11/7/2013, 12:55 pm
When I need a longer lathe,11/7/2013, 11:30 am
Photo tutorial put up on photo forum *NM*11/6/2013, 7:49 pm
Don't Forget Turning Chat Tonight 9:30 Eastern11/6/2013, 7:45 pm
Nova 202411/5/2013, 7:23 pm
spheres and a question *PIC*11/5/2013, 11:26 am
metal spinning *PIC*11/4/2013, 8:20 pm
The one i tie my hammock too. *NM*11/4/2013, 6:18 am
name your favorite tree...11/3/2013, 2:45 pm
I'm baaaaack11/3/2013, 7:37 am
monkey puzzle wood11/2/2013, 5:15 pm
New Guy *PIC*11/2/2013, 12:36 pm
I have looked in our archives and else where..11/1/2013, 5:33 pm
Happy Halloween -- a day late. *PIC*11/1/2013, 11:53 am
Mystery wood10/31/2013, 9:43 pm
Finish help and blank help?10/31/2013, 5:38 pm
Don't Forget Turning Chat Tonight 9:30 Eastern10/30/2013, 6:02 pm
Tinting wood glues?10/30/2013, 4:34 pm
World of Woodworking10/30/2013, 3:56 pm
Small cherry bowl *PIC*10/30/2013, 10:16 am
Shop Visitors *PIC*10/30/2013, 9:32 am
blue lettering10/29/2013, 10:17 pm
Shop friend *PIC*10/29/2013, 10:00 pm
Metal spinning tools *PIC*10/29/2013, 9:51 pm
Cracks in CA finish *PIC*10/29/2013, 3:15 pm
latest cupcakes *PIC*10/29/2013, 6:50 am
Electronics for a Nichols Lathe10/29/2013, 2:33 am
Grind on 1/4 bowl gouge10/29/2013, 12:01 am
Aspen?? -- Re-post10/28/2013, 6:04 pm
Re: Remove Hut Crystal Coat finish10/28/2013, 3:29 pm
What is an old Delta lathe worth?10/28/2013, 10:47 am
Getting a "deep" finish on a bowl is10/27/2013, 8:27 pm
I have a couple ideas for segmented 10/27/2013, 12:42 pm
Tool Holder prototype *PIC*10/27/2013, 11:18 am
House roofing, by the birds *PIC*10/27/2013, 8:26 am
How about Baltic Birch for Bangles?10/27/2013, 7:22 am
Habit of work question??10/27/2013, 7:09 am
The symptoms come and go....10/27/2013, 7:05 am
Finishing Small Bowl.10/26/2013, 1:19 pm
Terry Scott Box *PIC*10/26/2013, 1:08 pm
new icing *PIC*10/26/2013, 10:44 am
Not sure what happen... *PIC*10/25/2013, 1:34 pm
Sobering question: Estate planning for your shop?10/25/2013, 10:21 am
Emphysema10/24/2013, 8:40 pm
Remove Hut Crystal Coat finish10/24/2013, 5:05 pm
We have lost another turning brother.10/24/2013, 2:25 pm
Just another platter *PIC*10/24/2013, 5:28 am
Don't Forget Turning Chat Tonight 9:30 Eastern10/23/2013, 6:16 pm
Making liming wax10/23/2013, 5:11 pm
Spalted Maple Platter *PIC*10/23/2013, 2:01 pm
Question on adding a drawbar....10/23/2013, 8:16 am
Questions, that evil spiral with the skew????10/23/2013, 8:05 am
Rubber band chatter reduction *PIC*10/22/2013, 10:15 pm
Drilling a lamp post10/22/2013, 7:22 pm
Shaker knob video10/22/2013, 8:18 am
Using a Hook tool- good video *LINK*10/21/2013, 11:12 pm
'overhang' from tool rest - limits?10/21/2013, 2:01 pm
New use for bowl/funnel.... bike helmet10/20/2013, 8:11 pm
Red Stain Question (How to)10/20/2013, 12:54 pm
Repairing chuck key Question10/20/2013, 8:11 am
How is your lathe positioned?10/20/2013, 12:29 am
Hosting Profesional turners10/19/2013, 7:50 pm
Cracking problem10/18/2013, 6:21 pm
Eucalyptus burl necklace with black glass beading *PIC*10/18/2013, 5:14 pm
Art show opening tonight *LINK* *PIC*10/18/2013, 2:23 pm
Two great purchasing experiences10/18/2013, 11:07 am
More latest work "gavels" *PIC*10/17/2013, 11:10 pm
Some new ornaments *NM*10/17/2013, 6:26 pm
Small stool *PIC*10/17/2013, 3:56 pm
Interesting visitor to the shop10/17/2013, 1:00 pm
I actually counted 80 beads per ring10/17/2013, 9:44 am
Black Walnut Bowl *PIC*10/16/2013, 10:47 pm
I figured something out last night!10/16/2013, 7:19 pm
Variation on a Theme *PIC*10/16/2013, 6:59 pm
Don't Forget Turning Chat Tonight 9:30 Eastern10/16/2013, 6:06 pm
[AD] Klingspor's 13th Annual Extravaganza! *LINK*10/16/2013, 8:26 am
OT- Hey john Lucas... got a quote for ya..10/16/2013, 4:53 am
Bottle Stopper Question's10/15/2013, 10:33 pm
hot off the lathe!! *PIC*10/15/2013, 9:35 pm
New work *PIC*10/15/2013, 9:14 pm
WoW site access10/15/2013, 1:21 pm
Oops Another question on bangles10/15/2013, 8:12 am
creative uses for shavings10/15/2013, 3:07 am
cherry faceted box *PIC*10/14/2013, 4:52 pm
Walter Meier AG Being Sold - Jet & Powermatic10/14/2013, 8:52 am
What do you do when you aren't good enough?10/14/2013, 8:41 am
Anyone got pics of Wine stoppers?10/14/2013, 7:56 am
Question on Bangles or bracelets10/14/2013, 7:53 am
Christmas ornament ideas *PIC*10/13/2013, 11:01 pm
Bowl and dish *PIC*10/13/2013, 10:52 pm
More hand mirrors *PIC*10/13/2013, 10:37 pm
Hand mirror at auction *PIC*10/13/2013, 10:28 pm
Spalted Maple 10/12/2013, 11:33 pm
Woodburner Feedback10/12/2013, 12:31 pm
Woodturning Finish10/11/2013, 9:06 pm
No wonder my turnings sell for so little *LINK*10/11/2013, 6:15 pm
Playing with detail gouges *PIC*10/11/2013, 10:02 am
Programming DVR question10/11/2013, 9:22 am
Box Elder ornaments *PIC*10/10/2013, 9:46 pm
Any one own a LatheHamster *NM* *LINK*10/10/2013, 5:57 pm
Turning Tools Question.10/10/2013, 4:30 pm
Credit where credit is due10/10/2013, 3:53 pm
Oneway 2436 posted clasifieds10/10/2013, 1:55 pm
stacked Spheres *PIC*10/9/2013, 10:21 pm
Lathe question.....10/9/2013, 6:25 pm
Don't Forget Turning Chat Tonight 9:30 Eastern10/9/2013, 6:00 pm
Related but off10/9/2013, 8:08 am
Sphere Turning Jig *LINK* *PIC*10/9/2013, 6:06 am
Walnut bowl *PIC*10/8/2013, 10:25 pm
Managed to get some turning in *PIC*10/8/2013, 5:24 pm
Thinking through problems10/8/2013, 11:53 am
Something more costly than a Baldor? *LINK*10/7/2013, 10:02 pm
Wild Apple turned to completion10/7/2013, 3:57 pm
WoodCentral issue10/7/2013, 11:43 am
Turns like butter10/6/2013, 10:39 pm
Set of bowls question10/6/2013, 4:11 pm
Finish for working bowl???10/6/2013, 4:03 pm
Is WOW dead?10/6/2013, 1:55 pm
CBN Grits10/5/2013, 9:37 pm
Bearing change for powermatic 4510/5/2013, 9:32 am
John Veerkamp10/4/2013, 9:58 pm
Help with lathe jaws10/4/2013, 5:10 pm
Questions for those of you that sell....10/4/2013, 8:24 am
spheres done by sphereturning jig *LINK* *PIC*10/3/2013, 5:40 pm
New lathe10/3/2013, 5:28 pm
last 2 ornaments for a while *PIC*10/3/2013, 4:57 pm
New use for McNaughton Straight Cutter10/2/2013, 9:02 pm
Don't Forget Turning Chat Tonight 9:30 Eastern10/2/2013, 6:46 pm
Belt for Jet 1442 Lathe10/2/2013, 3:52 pm
OT John Lucas did you see Brad Sells on....10/2/2013, 1:54 pm
Bowl tearout questions.10/2/2013, 7:50 am
Turning in Reverse10/2/2013, 7:40 am
Testing images *PIC*10/1/2013, 4:57 pm
Wednesday Turning Chat 10/210/1/2013, 2:20 pm
Epilog vs. Universal laser engraving machine?10/1/2013, 11:32 am
turning topic for wed - wally's tools..9/30/2013, 11:23 pm
Mirror repair *PIC*9/30/2013, 9:23 pm
Walnut Beauty *PIC*9/30/2013, 7:54 pm
Question on coring...9/30/2013, 1:32 pm
Coring, observations.....9/30/2013, 1:25 pm
Ok. How to hollow wet wood?9/29/2013, 3:58 pm
New to wood central9/29/2013, 3:08 pm
buffing ca9/28/2013, 8:38 pm
Hemlock: horrible and great9/28/2013, 5:00 pm
Question on Nova DVR Error code9/28/2013, 3:47 pm
Flashlight Lit Exhibit Idea9/27/2013, 3:01 pm
for John Lucas: coloring epoxy9/27/2013, 2:28 pm
[AD] Klingspor's 13th Annual Extravaganza! *LINK*9/27/2013, 10:28 am
Painters tale9/27/2013, 9:38 am
Ambrosia Maple Questions9/27/2013, 9:02 am
Anyone have a favorite finish for Holly?9/26/2013, 8:56 pm
Scraper sharpening angle - any difference??9/26/2013, 3:36 am
Oneway tower jaws9/25/2013, 8:53 pm
Don't Forget Turning Chat Tonight 9:30 Eastern9/25/2013, 5:46 pm
AAW Symposium9/25/2013, 4:33 pm
Box Elder Hollow form *PIC*9/25/2013, 1:49 pm
Chats9/25/2013, 8:14 am
Deft9/24/2013, 11:14 pm
That box I asked about a bit ago *PIC*9/24/2013, 9:44 pm
I finally got to work on the Beads of........ *PIC*9/24/2013, 8:27 pm
A Fun Little Project *PIC*9/24/2013, 6:12 pm
View this *NM* *LINK*9/24/2013, 5:17 pm
***SURVEY: THE IDES OF SEPTEMBER***9/24/2013, 3:53 pm
Help naming Christmas tree9/24/2013, 3:13 pm
Safety notes from NJW meeting last night9/24/2013, 1:43 pm
Commercial Bowl Making *LINK*9/24/2013, 12:54 pm
Using Ambrosia Maple for treen??9/24/2013, 7:26 am
First vessel in a long time *PIC*9/23/2013, 8:30 am
Deft again9/23/2013, 7:40 am
Maple Hollow Form *PIC*9/22/2013, 9:20 pm
Turning Green to finish questions?9/22/2013, 12:59 pm
Angle Drill9/22/2013, 12:55 pm
Looks like it will be Pecan for a while (Gloat) *PIC*9/22/2013, 8:39 am
Life it too short....9/21/2013, 1:21 pm
screw it!9/21/2013, 4:56 am
Broke Spindle lock shaft collar on PM 3520A9/20/2013, 7:55 pm
What Shear Scrapper to use *PIC*9/20/2013, 4:41 pm
Woodturning cruise, but a woodturning eco-retreat?9/20/2013, 3:39 pm
GF's Woodturners Finish questions9/20/2013, 8:24 am
epoxy questions9/20/2013, 2:55 am
Fluteless gouges9/19/2013, 1:55 pm
Log slice stepping stones9/19/2013, 9:45 am
new ornaments *PIC*9/18/2013, 10:24 pm
Jigs for the lathe.9/18/2013, 8:17 pm
OT: Scam Warnins!!!!9/18/2013, 8:07 pm
Don't Forget Turning Chat Tonight 9:30 Eastern9/18/2013, 4:46 pm
Lenakana & Rhyton 29/18/2013, 3:16 pm
rebuilt huricane lamp *PIC*9/18/2013, 11:04 am
Questions on Lyle Jamerson's Hollowing rig9/17/2013, 2:25 pm
I need about 30 of these. *LINK*9/17/2013, 11:48 am
deft lacquer9/17/2013, 9:40 am
walnut bowl blank9/17/2013, 9:02 am
Like riding a bicycle-sorta *PIC*9/16/2013, 4:33 pm
Kaput cpmpressor9/16/2013, 1:49 pm
Potential deadly piece of wood *PIC*9/16/2013, 9:58 am
new turning idead to debate9/16/2013, 8:18 am
been gone a lot and not in shop9/16/2013, 8:07 am
check out thier lathes *NM* *LINK*9/16/2013, 8:00 am
David Ellsworth safe in Colorado floods9/15/2013, 8:38 pm
light for thin wall hollowform turning9/15/2013, 5:50 pm
Un-oiling a bowl9/14/2013, 10:39 pm
OT-you never know what you'll find on the web! *LINK*9/14/2013, 10:03 pm
World of Woodturners (WOW)9/13/2013, 9:13 pm
Work From New Zealand *PIC*9/13/2013, 8:38 pm
Any hints on turning a square platter?9/13/2013, 3:30 pm
Notice Rocky Mountain Woodturning Symposium9/13/2013, 9:49 am
Line of fire and shear scraping?9/11/2013, 10:11 pm
Don't Forget Turning Chat Tonight 9:30 Eastern9/11/2013, 8:50 pm
Danger in the wood9/11/2013, 2:52 pm
Help with tear out *PIC*9/11/2013, 12:43 pm
Question for you box makers (Mike Stafford?)9/11/2013, 9:16 am
i am a student of woodturning9/11/2013, 9:04 am
Globalization works - 9/11/2013, 12:32 am
Fair Gloat9/10/2013, 9:24 pm
Establishing a Safety Culture (Long)9/10/2013, 3:08 pm
Hollow Form *PIC*9/10/2013, 2:30 pm
Magazines in Benefit Auction9/10/2013, 10:47 am
NYTimes respirator article 9/10/2013, 8:54 am
Embellishment, but no turning *PIC*9/9/2013, 8:18 pm
A re-newed Longworth chuck *LINK*9/9/2013, 1:32 pm
magnolia9/9/2013, 12:45 pm
OT (over the top) Question9/9/2013, 10:06 am
NEW Shop Shot - #9629/9/2013, 5:26 am
Ahh, life is good.9/8/2013, 1:48 pm
Tool Rules OT! *PIC*9/8/2013, 9:02 am
face shields *LINK*9/7/2013, 9:16 pm
WC meeting *PIC*9/7/2013, 6:04 pm
The little Mermaid dissolves into seafoam..... *PIC*9/7/2013, 11:18 am
Safety Glasses9/7/2013, 9:07 am
CA is not my friend9/6/2013, 9:44 pm
Milk Painted Bowls *PICS* and loys of them!9/6/2013, 8:03 pm
Yet ANOTHER Safety Issue ;~)9/6/2013, 6:25 pm
undo-ing silicon glue9/6/2013, 3:36 pm
do you?9/6/2013, 1:26 pm
...but you already knew this..(faceshields)9/6/2013, 12:38 am
WOW9/5/2013, 7:15 pm
Grinding Wheels -- Line of Fire9/5/2013, 2:21 pm
How is Hemlock9/5/2013, 12:08 pm
Buffing bowls9/4/2013, 10:57 pm
Joe D, I have an extra Nova chuck key *PIC*9/4/2013, 9:40 pm
My friend Bob Henrickson is too bashful..... *PIC*9/4/2013, 7:58 pm
Don't Forget Turning Chat Tonight 9:30 Eastern9/4/2013, 6:29 pm
Turning Speed Safety Revisited9/4/2013, 12:46 pm
Call for entries for CWA traveling exhibition9/4/2013, 12:26 pm
Line of Fire question from below:9/4/2013, 11:47 am
back to turning *PIC*9/3/2013, 11:13 pm
Pepper mils9/3/2013, 9:36 am
Eucalyptus Type ID Help Needed *PIC*9/2/2013, 11:17 pm
Found this dry Osage burl while ......... *PIC*9/2/2013, 8:03 pm
Production Bowls9/2/2013, 7:16 pm
Laughing all the way *PIC*9/2/2013, 10:48 am
Grinding wheels??9/2/2013, 12:48 am
Turning Speed Safety9/1/2013, 12:24 pm
Heading to Marc Adams tomorrow.9/1/2013, 8:26 am
in defense of Trend line helmut9/1/2013, 8:13 am
Lathe accidents avoidance8/30/2013, 6:39 pm
Cutting Down Fruit Trees8/30/2013, 12:48 pm
speaking of Lynne Yamaguchi...8/30/2013, 1:51 am
accident *PIC*8/29/2013, 9:01 pm
Eccentric threads? (PIC) *PIC*8/29/2013, 7:19 pm
the origin of lichen8/29/2013, 5:10 pm
Tool Gloat!!! *PIC*8/29/2013, 11:32 am
watco wipe on poly8/28/2013, 10:12 pm
Looking for Information to revise my book8/28/2013, 9:54 pm
New Lathe to me *PIC*8/28/2013, 7:54 pm
Powermatic Inverter update and ?8/28/2013, 6:33 pm
Don't Forget Turning Chat Tonight 9:30 Eastern8/28/2013, 2:07 pm
what glue to use8/28/2013, 11:27 am
tool handle size?8/25/2013, 4:45 pm
what is the warranty period on 10,000 hours?8/25/2013, 1:32 pm
Baileigh Industrial8/25/2013, 7:41 am
Ambrosia Red *PIC*8/24/2013, 6:27 pm
Walker-Turner Lathe Manual???8/24/2013, 4:40 pm
Do not try this at home, really8/23/2013, 9:15 pm
molds under anchorseal8/23/2013, 4:31 pm
Food for thought8/23/2013, 1:42 pm
Dyes & Box Elder *PIC*8/23/2013, 10:18 am
Down at SWAT8/23/2013, 7:44 am
fading dyes?8/22/2013, 2:47 am
swatt8/21/2013, 11:23 pm
Filtering & Creativity8/21/2013, 11:10 pm
Powermatic 3520A inverter problem8/21/2013, 2:23 pm
success!8/21/2013, 3:36 am
[AD] 3-Day SWAT Promotion from Turningwood.com *LINK*8/20/2013, 10:31 pm
Woodshop withdrawl8/18/2013, 8:37 pm
Soapstone8/18/2013, 1:45 am
Vortex and skewigouge8/17/2013, 8:24 pm
Chrome Plated Stopper Use *PIC*8/17/2013, 4:06 pm
Help with cracking bowl?8/17/2013, 11:47 am
Installed Doc's remote control in less than 30 min8/16/2013, 2:30 pm
Need SuperNova chuck key8/15/2013, 4:39 pm
My swap piece from Don Leydens......... *PIC*8/14/2013, 9:16 pm
Don't Forget Turning Chat Tonight 9:30 Eastern8/14/2013, 6:27 pm
Liam O Neill Demo comming to QCWT8/13/2013, 8:35 pm
Stick pens *PIC*8/13/2013, 7:38 pm
General 260 gap filler8/13/2013, 1:01 am
Headed to Texas8/12/2013, 9:12 pm
Alan Carter's "Split Bowl" Idea *LINK* *PIC*8/11/2013, 12:39 pm
Bonnie Klein Jig8/10/2013, 10:14 am
some mirrors just fight me *PIC*8/9/2013, 8:32 pm
Remote Switch - Success *PIC*8/9/2013, 5:31 pm
rope neck *PIC*8/8/2013, 8:53 pm
Not necessarily OT *LINK*8/8/2013, 3:13 pm
YOu don't need a larger lathe *LINK* *PIC*8/8/2013, 2:35 pm
Alternative Woodworking Project.... *LINK*8/8/2013, 12:34 pm
Took an Awesome class with Dixie Biggs last week *PIC*8/8/2013, 11:29 am
If I had a larger lathe . . . *PIC*8/8/2013, 3:01 am
Summer Boxes *PIC*8/7/2013, 9:34 pm
Don't Forget Turning Chat Tonight 9:30 Eastern8/7/2013, 8:49 pm
Ontogeny Recapitulates Phylogeny? *PIC*8/6/2013, 7:59 pm
Wednesday Turning Chat 8/78/6/2013, 5:25 pm
Mallee burls have to be among the ...... *PIC*8/6/2013, 4:25 pm
Eye from Masur Birch *PIC*8/5/2013, 10:18 pm
routed mirror *PIC*8/5/2013, 9:46 pm
Critter cam8/5/2013, 5:34 pm
How many of you collaborate with club members? *PIC*8/5/2013, 4:15 pm
New blog post on pyrography *LINK*8/5/2013, 3:11 pm
Favorite bow gouge size?8/5/2013, 12:42 pm
Asheville, NC8/5/2013, 11:07 am
Birdhouse Bodies *PIC*8/4/2013, 4:07 pm
Fir Burl8/4/2013, 12:41 pm
Any ideas8/4/2013, 9:04 am
Kilns8/4/2013, 6:28 am
Cherry Scoop *PIC*8/3/2013, 1:29 pm
Panama Beach, Fl8/3/2013, 11:51 am
OT Ok 6:45 am and8/3/2013, 8:43 am
new ornament *PIC*8/3/2013, 7:43 am
RE: MOWER8/2/2013, 9:25 pm
1 million percent humidity and I've gotta go weld8/2/2013, 2:59 pm
127 flea mkt sale *PIC*8/2/2013, 7:30 am
McNaughton Core Saver8/1/2013, 12:01 pm
Spindle Turning Demonstrations8/1/2013, 9:27 am
Fiddle Back Theory *PIC*8/1/2013, 12:07 am
Don't Forget Turning Chat Tonight 9:30 Eastern7/31/2013, 4:53 pm
Charlie Belden needed on photography forum7/31/2013, 3:14 pm
Build your own pen kit?7/31/2013, 2:27 pm
No horses this time *PIC*7/30/2013, 8:10 pm
Metal spinning a steel disk ? ? ?7/30/2013, 3:14 pm
look at all the pretty colors *PIC*7/30/2013, 5:10 am
its hot with bubbles *PIC*7/30/2013, 5:03 am
Metal spinning tools7/30/2013, 1:26 am
Club Video System7/29/2013, 4:45 pm
***SURVEY: THE IDES OF JULY*** *LINK*7/29/2013, 11:09 am
General 260 quill7/29/2013, 10:20 am
Turning speed7/29/2013, 1:57 am
Cherry Burl - White Fungus? *PIC*7/28/2013, 9:23 pm
If you can't visualize IT, can you make IT?7/28/2013, 3:29 pm
B&W Ebony, another wood from my ..... *PIC*7/28/2013, 2:31 pm
Diamond grinders: anybody regretting the purchase?7/28/2013, 11:06 am
Does bleach damage the wood surface?7/28/2013, 11:04 am
Funerary Urn for Dick Plog *PIC*7/27/2013, 7:06 pm
Remote Switch for PM 35207/27/2013, 6:07 pm
Noise in PM 3528b7/26/2013, 10:42 pm
Polynesian pipe *PIC*7/26/2013, 10:17 pm
mcnaughton question7/26/2013, 9:51 pm
Capacitor source7/26/2013, 9:52 am
vaccum pump choice7/26/2013, 12:21 am
Every thing I thought I knew about spalting was wr7/25/2013, 11:31 pm
coat tree plans7/25/2013, 8:26 pm
First hollow form *PIC*7/25/2013, 7:00 pm
Wood stash ID anyone? I selected ....... *PIC*7/25/2013, 3:40 pm
OT: technology rant semi-applicable to turning7/25/2013, 3:14 pm
Resp-O-Rator7/25/2013, 10:20 am
During a recent Bluegrass Area........ *PIC*7/24/2013, 9:13 pm
Don't Forget Turning Chat Tonight 9:30 Eastern7/24/2013, 5:51 pm
routed ornament *PIC*7/23/2013, 9:08 pm
New turnings *PIC*7/23/2013, 9:05 pm
My First Grandchild -- Meet Chase Philip Vietje! *PIC*7/23/2013, 6:11 pm
Good week & bad day7/23/2013, 12:31 pm
Need some help7/22/2013, 5:23 pm
Identify Vacuum Adapter *PIC*7/22/2013, 3:32 pm
I hate waiting for glue to dry. *PIC*7/22/2013, 10:38 am
Clean work shop joke7/22/2013, 6:41 am
routed bowls *PIC*7/21/2013, 8:38 pm
i never took geometry - math help7/21/2013, 6:36 pm
stain, mold, spalting7/21/2013, 12:47 pm
How do you keep maple from blotch spalting7/20/2013, 9:42 pm
Walnut urn *PIC*7/20/2013, 5:00 pm
OT Magic fingers7/20/2013, 1:20 am
chuck comparison *PIC*7/19/2013, 9:54 pm
AAW article - baseball thread layout7/18/2013, 11:54 pm
Teaching Artist - suggestions7/18/2013, 11:49 pm
miniature work that puts me to shame *NM* *LINK*7/18/2013, 7:22 pm
More on The Vision Thing *LINK*7/18/2013, 5:59 am
Don't Forget Turning Chat Tonight 9:30 Eastern7/17/2013, 5:10 pm
HOLLOW FORM7/16/2013, 8:22 pm
I think I bought a car from this lady *NM* *LINK*7/16/2013, 5:35 pm
Harvey Fein7/16/2013, 10:36 am
A turning problem7/15/2013, 10:19 pm
Coincidence? Perhaps . . .7/15/2013, 8:44 pm
Stick pens & youth *PIC*7/15/2013, 11:41 am
PM 4224 Remote Switch7/14/2013, 11:23 am
hard jaws for my jumbo jaws *PIC*7/12/2013, 3:40 pm
router mount for lathe7/12/2013, 3:06 pm
Be careful what you wish for, Lyle ;) *PIC*7/12/2013, 12:53 pm
new mirrors *PIC*7/12/2013, 9:32 am
another good experience...7/12/2013, 3:31 am
Is7/10/2013, 7:33 pm
Don't Forget Turning Chat Tonight 9:30 Eastern7/10/2013, 6:20 pm
Replacement Audio jacks *PIC*7/10/2013, 6:06 pm
OT...Married 71 years today....7/10/2013, 10:09 am
ot electronic stuff *LINK*7/9/2013, 10:29 pm
A fun shop-class project7/9/2013, 4:33 pm
Thinking of Molly when painting this.. *PIC*7/9/2013, 1:24 pm
old turnings *PIC*7/9/2013, 10:52 am
Attn. John Lucas7/8/2013, 9:07 pm
outboard spindle buggered threads *PIC*7/8/2013, 6:06 pm
A couple experiments *PIC*7/8/2013, 5:08 pm
OT - but interesting and perhaps inspiring *LINK*7/8/2013, 1:34 pm
ot humidity7/8/2013, 9:44 am
OT on vacation in the smokies *PIC*7/8/2013, 7:31 am
Recent turning *PIC*7/7/2013, 11:14 pm
AAW Web Site Winner *LINK*7/7/2013, 9:10 pm
So, What's it like..... *PIC*7/6/2013, 11:31 pm
more AAW symposium stuff *LINK*7/6/2013, 10:23 pm
Porte Cable 8" variable speed grinder?7/6/2013, 9:08 pm
Turners Without Borders7/6/2013, 7:51 pm
Black Walnut Lidded Box7/6/2013, 2:49 pm
clubchallenge *PIC*7/6/2013, 1:08 pm
Powermatic 90 tailstock dissassembly *LINK*7/6/2013, 11:31 am
Designed vs Seen - and what you can do about it *LINK* *PIC*7/6/2013, 4:30 am
making pens WITHOUT KITS!!7/6/2013, 12:29 am
Tell us about Tihs years AAW symposium Demo's7/5/2013, 7:24 pm
Sources for truckloads of whole logs7/5/2013, 3:37 pm
more AAW symposium stuff7/5/2013, 3:35 pm
Claro Walnut/Yellowheart Lidded form *PIC*7/5/2013, 3:12 pm
Put on the AAW site by Jeff Schnell-instant galler *NM* *LINK*7/5/2013, 1:28 pm
OT: Worst thing ever...7/4/2013, 9:12 pm
National Anthem7/4/2013, 3:14 pm
Was it released in Tampa?7/4/2013, 9:42 am
Fourth of July7/4/2013, 8:15 am
Squaring up a cabinet using band clamps7/3/2013, 10:29 pm
Don't Forget Turning Chat Tonight 9:30 Eastern7/3/2013, 8:41 pm
AAW symposium7/3/2013, 10:02 am
Tool rest height7/3/2013, 7:32 am
AAW photos7/2/2013, 10:42 am
Tampa Learnings & sightings - Still Waiting!!7/1/2013, 10:11 pm
Natural Edge spalted maple burl goblet *PIC*7/1/2013, 8:54 pm
Pigeon Forge Tn7/1/2013, 2:24 pm
This is way to quiet.........6/30/2013, 5:07 pm
Protection when spraying finishes6/28/2013, 12:44 pm
HOW we see - what we PERCEIVE *PIC*6/28/2013, 12:39 pm
Finish for Spalted wood? *PIC*6/27/2013, 6:55 pm
" I's had enough and enough is too much!" *LINK*6/27/2013, 3:24 pm
A Call To Arms...6/27/2013, 4:51 am
Don't Forget Turning Chat Tonight 9:30 Eastern6/26/2013, 6:49 pm
Bradford Pear won't Float!6/26/2013, 2:47 pm
OT - HVAC in 3 car garage6/24/2013, 10:18 pm
40th Anniversary Gift Box *PIC*6/24/2013, 2:51 pm
taking stock of my mirrors6/24/2013, 2:38 pm
Who's going to Tampa6/24/2013, 9:47 am
not exactly a bowl...formal portrait :) *PIC*6/23/2013, 7:00 pm
So many minis!! *PIC*6/23/2013, 4:46 pm
Not Just Pens6/22/2013, 9:22 pm
3520b questions6/22/2013, 7:40 pm
Kickstarter...A New Market to Exploit?6/22/2013, 1:27 am
Overwhelmed by options for chucks6/20/2013, 9:31 pm
something fishy *PIC*6/20/2013, 4:42 pm
Looking vs Watching vs Interacting/Participating6/20/2013, 2:49 pm
IMAGES REQUESTED - Gizmos & Gadgets for Symposium6/20/2013, 1:48 pm
Powermatic6/20/2013, 7:14 am
Bill Grumbine6/19/2013, 11:00 pm
Don't Forget Turning Chat Tonight 9:30 Eastern6/19/2013, 4:16 pm
Emerald Ash Borer *LINK*6/19/2013, 4:07 pm
turnings in Kohls *PIC*6/19/2013, 10:25 am
HELP FROM YOU ALL6/18/2013, 9:19 pm
Wax softner6/18/2013, 5:59 pm
spider webs *PIC*6/18/2013, 1:03 pm
Peppermill Kit (Mr. Dudley)6/17/2013, 8:06 pm
A first!6/17/2013, 7:33 pm
Best four days of my woodturning life (long)6/17/2013, 6:24 pm
Best four days of my woodturning life6/17/2013, 6:21 pm
Tall covered containers *PIC*6/17/2013, 2:16 pm
Powered Air Respirator6/17/2013, 12:22 pm
funny video- Cindy Drozda *LINK*6/17/2013, 9:02 am
SWAT swap II?6/17/2013, 12:45 am
JET 1642. Nice lathe, bad banjo.6/16/2013, 4:08 pm
Irish Wall wood art collaboration6/16/2013, 3:14 pm
Critter Cam6/16/2013, 12:22 pm
pecan log6/16/2013, 11:46 am
No match for my bush hog *PIC*6/15/2013, 4:27 pm
Rest in Peace Dave Peebles6/15/2013, 2:00 pm
New work - "Lines on Fire" *PIC*6/15/2013, 11:58 am
so how do you store your logs, blanks. rough outs6/15/2013, 1:08 am
collaboration bowl auction ending soon!!!6/14/2013, 12:22 pm
[AD] Easy Wood Tools Father's Day Sale6/14/2013, 11:24 am
Sealer under lacquer6/13/2013, 8:35 pm
Motor types on a lathe6/13/2013, 10:13 am
Delta DL-40 lathe...HELP6/12/2013, 8:46 pm
General Wood Lathe 6/12/2013, 8:30 pm
Don't Forget Turning Chat Tonight 9:30 Eastern6/12/2013, 7:08 pm
Kickstart for a friend *LINK*6/12/2013, 11:39 am
Bee Hive Ornament *PIC*6/12/2013, 12:23 am
AAW Currents exhibit *PIC*6/11/2013, 9:07 pm
help me buy an air compressor6/11/2013, 5:15 pm
Safety and the AAW6/11/2013, 1:23 pm
cutting black pipe for clamps6/11/2013, 10:12 am
Hackberry goblet - prepping for a demo *PIC*6/10/2013, 9:38 pm
Woodfast M408h6/10/2013, 8:22 pm
Adrien is home6/10/2013, 2:16 pm
How old is the lathe?6/10/2013, 5:40 am
Grinders6/9/2013, 9:03 pm
Manufacturers and the Forums6/9/2013, 12:25 pm
Paypal - long.6/8/2013, 8:46 am
mind the cobbles... *PIC*6/8/2013, 2:33 am
How to remove gouge from older Glaser handle?6/6/2013, 9:40 pm
Sharpen a Skew with Acid ???6/6/2013, 7:02 pm
Mirror #1--J. Lucas Design *PIC*6/5/2013, 9:12 pm
WC'er Severely Injured6/5/2013, 7:35 pm
Don't Forget Turning Chat Tonight 9:30 Eastern6/5/2013, 6:01 pm
Water soluble colors *PIC*6/5/2013, 3:46 pm
Shop tip, not turning related...6/5/2013, 8:53 am
mahonia bealei pens *PIC*6/4/2013, 5:19 pm
home built Banjo *PIC*6/4/2013, 12:11 pm
Ascertaining wood movement using different woods *PIC*6/4/2013, 11:45 am
Cost of Carbide vs HSS6/4/2013, 6:43 am
Chainsaw gas ?6/2/2013, 5:34 pm
Design in SIDE VIEW, View in more of an ISO VIEW6/2/2013, 2:16 am
best grind for a skew6/1/2013, 4:41 pm
Jewelry bowl is finished. *PIC*5/30/2013, 9:07 pm
Benefit bowl for Dave P is on benefit auction *NM*5/29/2013, 10:20 pm
All about chain saws.5/29/2013, 6:26 pm
Don't Forget Turning Chat Tonight 9:30 Eastern5/29/2013, 3:46 pm
Bowl Lathe5/29/2013, 2:25 pm
Finishing new hardwood floors5/29/2013, 11:23 am
Sorby 1/4" bead/ring cutting set on ebay5/29/2013, 9:48 am
new benefit for Dave 5/28/2013, 10:53 pm
House almost done- now back to turning *PIC*5/28/2013, 9:51 am
Dale Nish services5/28/2013, 8:36 am
any recommendations for KC barbeque?5/27/2013, 7:40 pm
Dale Nish5/26/2013, 1:50 pm
Snow Falling & Trees Breaking In Northern Vermont5/25/2013, 10:58 pm
Threading Boxes - help long5/25/2013, 10:01 pm
Jet Vortex Cone *LINK*5/25/2013, 10:36 am
OT iPod question5/25/2013, 9:46 am
SOME of Round & Brown Idea *LINK* *PIC*5/24/2013, 4:00 pm
Please Rank these items (for me, but you too)5/23/2013, 3:09 pm
plywood vase *PIC*5/22/2013, 6:10 pm
Don't Forget Turning Chat Tonight 9:30 Eastern5/22/2013, 5:39 pm
Club lifespan?5/22/2013, 1:12 pm
Buffing with Tripoli before flocking?5/21/2013, 8:54 pm
Fruits & Nuts -apple/walnut tall goblet *PIC*5/21/2013, 5:27 pm
Black Willow for Turning5/20/2013, 8:51 pm
Bath Renewal5/20/2013, 1:08 pm
To much wood5/20/2013, 11:29 am
Big Hummer in Southern Oregon--OT *PIC*5/18/2013, 11:50 pm
Sticky Stick: AAW FUNdamentals video5/18/2013, 2:37 pm
Pens5/18/2013, 12:54 pm
Why I read this forum: *PIC*5/18/2013, 11:47 am
Engraving alternative (long) *PIC*5/17/2013, 2:15 pm
cupcake save *PIC*5/16/2013, 10:29 pm
OSHA nightmare *LINK*5/16/2013, 12:00 pm
Bummer didn't win the powerball5/16/2013, 7:54 am
Another Thread Cutting Jig *LINK*5/15/2013, 10:45 pm
Don't turn crappy wood *PIC*5/15/2013, 10:27 pm
Something slipped. *PIC*5/15/2013, 10:17 pm
Don't Forget Turning Chat Tonight 9:30 Eastern5/15/2013, 4:47 pm
Cocobolo on CITES Appendix II *LINK*5/15/2013, 3:51 pm
Something you don't see every day-OT *LINK*5/14/2013, 6:18 pm
Rubber Stopper 5/14/2013, 9:38 am
chocolate chip cupcake *PIC*5/13/2013, 10:38 pm
wood identification book5/13/2013, 12:54 pm
New Material on Website *LINK*5/13/2013, 10:09 am
house painting done- now on to turning *PIC*5/12/2013, 6:07 pm
Did anyone ever turn a Piggybank????5/12/2013, 5:27 pm
A bunch of flowers! *PIC*5/12/2013, 3:43 pm
Avoidance - Fear of Commitment5/12/2013, 1:51 pm
John Lucas - Threading jig?5/10/2013, 9:15 pm
Not a box *PIC*5/9/2013, 3:30 pm
Joe Rollins - Lathe Simplicity *LINK*5/9/2013, 12:16 pm
Upgrade complete *PIC*5/8/2013, 8:18 pm
A drill press and Skill saw lathe.... *LINK*5/8/2013, 5:51 pm
Don't Forget Turning Chat Tonight 9:30 Eastern5/8/2013, 5:36 pm
Munro 3/4" Shaft hollower (?s) *PIC*5/8/2013, 2:05 pm
Anybody check out Laguna for lathes recently? *LINK*5/8/2013, 1:57 pm
My Big Red knob died ... *PIC*5/7/2013, 2:51 pm
ot Illusion *NM* *LINK*5/7/2013, 7:10 am
OT: Walnut Chunks5/6/2013, 9:55 pm
glaser tools5/6/2013, 7:44 pm
New Shop - Another question5/6/2013, 1:25 pm
ot- new carpet5/6/2013, 12:37 pm
Awesome turning shop for sale on classifieds! *NM*5/6/2013, 11:33 am
Wow! Think I've been gouged on flocking order5/5/2013, 8:35 pm
Recessed bead in end grain - best way to cut? *PIC*5/5/2013, 7:58 pm
Embellishments5/5/2013, 5:45 pm
Hey Mac *PIC*5/5/2013, 5:29 am
General's Upgrade *PIC*5/4/2013, 10:41 pm
300 HP Chain Saw *LINK*5/4/2013, 9:34 am
Seattle Area FREE STUFF! *PIC*5/3/2013, 3:04 pm
New (and I do mean new) Shop5/3/2013, 1:40 pm
Lint free cloths5/3/2013, 12:51 pm
Hat maker questions...5/3/2013, 12:08 pm
Build a treadle lathe in 6 minutes5/3/2013, 12:25 am
Turning can be intoxicating! *PIC*5/1/2013, 9:52 pm
Delta midi mods *PIC*5/1/2013, 8:51 pm
cupcake blanks *PIC*5/1/2013, 8:44 pm
McEvoy Boring Bar *PIC*5/1/2013, 7:58 pm
Wednesday Turning Chat 5/015/1/2013, 4:58 pm
Tormek jigs?5/1/2013, 9:57 am
Powercrafter5/1/2013, 9:21 am
Large Elm Vase *PIC*4/30/2013, 9:47 pm
Grinding a parting tool4/30/2013, 6:51 pm
Tops For Project Village Africa4/30/2013, 1:33 pm
New Demonstrator Training Video4/30/2013, 9:19 am
Back to size and senses 4/30/2013, 7:26 am
snipe4/30/2013, 1:24 am
Mamma got a new TOY!! OT *PIC*4/29/2013, 7:24 pm
Elm4/29/2013, 6:23 pm
Yew Wood 4/29/2013, 2:38 pm
2014 Norwegian Woodturning Cruise4/29/2013, 10:13 am
Size & Senses4/28/2013, 11:06 pm
CBN Again4/28/2013, 8:31 pm
Looking for hot pink flocking stuff4/28/2013, 8:09 pm
Latest work *PIC*4/28/2013, 8:00 pm
Goblet Grouping II *PIC*4/28/2013, 3:01 pm
Goblet Grouping *PIC*4/28/2013, 2:31 pm
Box save *PIC*4/28/2013, 11:36 am
photo description on the photo board *NM*4/28/2013, 7:55 am
New multi axis mirrors *PIC*4/27/2013, 11:04 pm
Cupcakes anyone *PIC*4/27/2013, 11:02 pm
vacuum chuck4/26/2013, 11:17 pm
WOW4/26/2013, 10:37 pm
Does the AAW track turning incidents?4/26/2013, 5:39 pm
George Jones corvette song *LINK*4/26/2013, 5:29 pm
VFD4/26/2013, 9:46 am
Simple Lidded Box - Spalted Maple *PIC*4/25/2013, 5:11 pm
Grex vs. Apprentice air powered ROS?4/25/2013, 2:07 pm
Great segmented video *LINK*4/25/2013, 8:18 am
Steam Powered Box Making OT *LINK*4/25/2013, 6:37 am
Demonstrating without a faceshield4/24/2013, 5:45 pm
Do you finish everything you turn?4/24/2013, 5:02 pm
Walnut pedestal bowl *PIC*4/24/2013, 4:56 pm
Sisso Dalebergia Hollow Form *PIC*4/24/2013, 4:51 pm
Wednesday Turning Chat 4/244/24/2013, 4:45 pm
How thin to turn a lid *PIC*4/24/2013, 3:40 pm
Tung Oil Problem4/23/2013, 8:15 pm
Ash bowl *PIC*4/23/2013, 8:13 pm
chopping block *PIC*4/23/2013, 8:10 pm
I am surprised......4/23/2013, 5:37 pm
Another treadle lathe *LINK*4/22/2013, 10:34 am
new work *PIC*4/21/2013, 10:57 pm
Arrowmont trip *PIC*4/21/2013, 9:37 pm
Time Lapse Motion - in 3D *PIC*4/21/2013, 9:30 pm
Woodturning Exhibit @ the Crocker Art Museum 4/21/2013, 7:16 pm
Haven't had this4/21/2013, 6:12 pm
Mahoney Walnut Oil Wax Finish4/21/2013, 3:19 pm
Carver help4/21/2013, 9:21 am
Something to think about...4/21/2013, 8:55 am
spectator turned demonstrator4/20/2013, 6:25 pm
Cherry Seed Pod *PIC*4/20/2013, 12:18 am
New Drive and Motor *PIC*4/19/2013, 11:15 pm
Where to get velcro backed sheets of sandpaper?4/19/2013, 8:51 pm
If Mike Foster & J.Paul Fennell collalborated *LINK* *PIC*4/19/2013, 5:09 pm
Help wanted4/19/2013, 2:01 pm
Quick tip for turning thin spindles(Charlie et al)4/19/2013, 10:12 am
Bowls & Boxes *PIC*4/18/2013, 9:00 pm
I seem to have lost my Skew Mojo4/18/2013, 7:45 pm
Simple low-cost 2D drawing software?4/17/2013, 9:17 pm
Wednesday Turning Chat 4/174/17/2013, 8:35 am
Does anyone4/17/2013, 2:38 am
The Vac is Back4/16/2013, 4:36 pm
Lennox Die Master Bi Metal Blades4/16/2013, 3:50 pm
compressor noise4/16/2013, 4:26 am
Solar powered lathe?4/15/2013, 5:07 pm
One Handle for multiple tools4/15/2013, 1:52 pm
Gettin' Jiggy *LINK*4/15/2013, 1:20 pm
Jet reverse chuck *PIC*4/14/2013, 9:55 pm
compressor (insert bad words here...)4/14/2013, 2:23 pm
Headed to Arrowmont4/14/2013, 11:07 am
Royal Easter show results link 4/13/2013, 6:06 pm
latest tool *PIC*4/13/2013, 4:46 pm
Making your own lathe4/13/2013, 9:42 am
Big Jim Super sized *PIC*4/13/2013, 1:20 am
Neat turning group site with some great turnings *LINK*4/12/2013, 10:36 pm
router mirrors *PIC*4/12/2013, 10:16 pm
VFD and Motor4/12/2013, 8:42 pm
OT: Parks and Rec - Ron Swanson *LINK*4/12/2013, 11:35 am
The Evolution Chuck is about to land4/12/2013, 10:42 am
Question about long spindles4/11/2013, 11:46 pm
vacuum attachments4/11/2013, 9:19 pm
Mini router *PIC*4/11/2013, 9:07 pm
Jamie Donaldson gets Hole in one. *LINK*4/11/2013, 6:46 pm
Super Dry4/11/2013, 10:10 am
Challange for John Lucas *LINK*4/11/2013, 8:23 am
Air compressor question4/11/2013, 8:04 am
Now I can draw really badly in 3D *NM* *LINK*4/10/2013, 11:21 pm
Curly Maple bowl - about 7" diameter *PIC*4/10/2013, 9:08 pm
Two recent tool handles *PIC*4/10/2013, 9:03 pm
mesquite4/10/2013, 6:27 pm
Turning a mallet from ipe4/10/2013, 9:58 am
Material for handles *PIC*4/10/2013, 7:03 am
Inlace4/9/2013, 6:15 pm
Word of Woodturners4/9/2013, 5:37 pm
Club challenge *PIC*4/9/2013, 1:37 pm
Tool Handle Wood Split ? ?4/9/2013, 10:02 am
Wednesday Turning Chat 4/104/9/2013, 9:50 am
anyone tried this for oily woods *LINK*4/9/2013, 7:40 am
New hollow vessel *PIC*4/8/2013, 9:33 pm
Best glue for segmented salad bowl4/8/2013, 12:32 pm
Congratulations to John Lucas....4/8/2013, 10:51 am
Dave Peebles Collaboration . . Status??4/8/2013, 9:10 am
Copying others work4/8/2013, 8:59 am
Orientation of Compression Wood - Hardwood vs Soft *PIC*4/8/2013, 3:57 am
lidded jar form *PIC*4/7/2013, 8:36 pm
Shipping wood to Australia4/7/2013, 7:58 pm
Dinner! OT4/7/2013, 5:45 pm
Cheap homemade lathe :) *NM* *LINK*4/7/2013, 1:25 pm
***A note about the archives...4/7/2013, 12:34 pm
reshaping buffing wheels *PIC*4/7/2013, 11:25 am
New Shop Space! *PIC*4/6/2013, 10:28 pm
Turning oak black4/6/2013, 10:03 pm
My video...turning a three sided cup4/6/2013, 9:19 pm
New Old Wish Bowls *PIC*4/6/2013, 8:57 pm
A Couple of New Boxes *PIC*4/6/2013, 8:49 pm
Giant Kauri Trees *PIC*4/6/2013, 7:47 pm
Jaw stain4/6/2013, 2:08 pm
The Arch *PIC*4/6/2013, 6:35 am
Oak & Teak Epoxy Glue - Used it? *LINK*4/5/2013, 8:53 pm
Completely 100% Off Topic *LINK*4/5/2013, 4:25 pm
Hook Knife pictures for Jerry Klug *PIC*4/5/2013, 4:02 pm
Incomplete Oliver4/5/2013, 12:25 pm
Johannes fixtures *PIC*4/4/2013, 11:00 pm
Candlesticks *PIC*4/4/2013, 10:58 pm
I been busy *PIC*4/4/2013, 10:56 pm
wooden tool rest *PIC*4/4/2013, 5:30 pm
shop cleaned more often than my house :)4/4/2013, 1:44 pm
Wooden Rings4/4/2013, 1:30 pm
early morning half asleep designing4/4/2013, 5:45 am
Anyone tried this method for bandsaw tension4/3/2013, 11:04 pm
CHEAP Walnut Logs in Columbia MO4/3/2013, 7:59 pm
so you thought cutting trees was dangerous *NM* *LINK*4/3/2013, 7:29 pm
Turning Extremely Dry Redwood Burl4/3/2013, 6:17 pm
Spoon Gouge and hook knife reviews?4/3/2013, 1:52 pm
Walnut Hollowform *PIC*4/3/2013, 10:05 am
wood & food allergies4/3/2013, 9:50 am
Wednesday Turning Chat 4/34/3/2013, 9:16 am
Lee Valley April 1st Tool?4/2/2013, 4:54 am
Band Saw Blades4/1/2013, 8:24 pm
Picked up a set of Crown Spindle tools4/1/2013, 8:06 pm
Natural edge question4/1/2013, 12:41 pm
Rough out storage question4/1/2013, 12:34 pm
Pancake flipper *PIC*4/1/2013, 7:28 am
Another leaf carved bowl sorry *PIC*4/1/2013, 12:59 am
happy Easter3/31/2013, 1:45 pm
Who hung this monster door?3/30/2013, 10:43 pm
Not too far OT3/30/2013, 5:40 pm
anyone know about garage doors?3/30/2013, 2:30 pm
OT- Florida Motel - OT3/29/2013, 6:30 pm
More on 3 point tool and beading3/29/2013, 8:28 am
Saw this on TV tonight3/29/2013, 12:22 am
Source for Alaskan Yellow Cedar3/28/2013, 9:35 pm
Computers3/28/2013, 9:31 pm
OT - Compressor Question3/28/2013, 4:50 pm
Big pieces of African Blackwood3/28/2013, 3:07 pm
Stopping the Wobbles...3/28/2013, 11:28 am
sometimes you just gotta have fun *PIC*3/27/2013, 10:48 pm
OT ? : Chuck lubing tip3/27/2013, 10:46 pm
Lee Valley Tools Wooden Vase article3/27/2013, 7:59 pm
Woodturning magazine3/27/2013, 1:05 pm
Roughing out hollowforms? *PIC*3/25/2013, 4:11 pm
Scrapers don't cut, they scrape??????3/24/2013, 2:02 pm
Cheap CA glue3/23/2013, 8:20 am
Pie Server3/21/2013, 10:13 am
NIP Help? *PIC*3/20/2013, 10:27 pm
Geez, I Could Make One of Those *LINK*3/20/2013, 1:18 pm
Box (Pic) *PIC*3/19/2013, 6:25 pm
Spatulas and Spoons (PIC) *PIC*3/19/2013, 6:16 pm
Wolverine new idea *PIC*3/19/2013, 12:24 pm
totally turning3/18/2013, 10:43 pm
Walnut box *PIC*3/18/2013, 8:25 pm
Visit With Dave Peebles!!3/9/2013, 8:54 pm
1 2 3 4 5
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081