Hand Tools Archive

Subject:
Another (not) ruler trick

Mike In Los Angeles
If you have a scraper fixed at 90*, it helps to draw a 45* burr. Here’s a cheat using stuff you have lying around. Burnishing blade is rounded off and buffed out a little.

Just to say it:
There’s better ways probably
People have likely been doing this for centuries
You should be able to do it by hand
Scraping is unnecessary anyways if you’re good

63-AF3-ED9-4969-4-A11-BE07-7-D87513987-AE
C8-EF1-F2-C-853-D-479-B-B6-D9-6-D81424-EB99-B A653-D561-8158-4839-A15-A-B99-C206-CC8-FC
C8-EF1-F2-C-853-D-479-B-B6-D9-6-D81424-EB99-B

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081