Hand Tools Archive

Subject:
Re: Clarification, please
Response To:
Re: Clarification, please ()

Derek Cohen (in Perth, Australia)
He probably has less control of the geometry with his method, and he leaves a bunch of unnecessary metal behind it, but I get what he's doing - finding something suitable for beginners.

We're generally past that and trying to find something else. (100% success, same or better sharpness by finish and by wedging resistance, every edge pretty much identical and edge durability that's as good as a blunt edge).

If that is so, it is worth noting that Sellers uses the same process for plane blades.

David, you wrote that you do not recommend the power stropping for plane blades .. tell me why again?

Incidentally, below is a photo of a powered strop ia made in 2005 using a leather disk on a sander. This was soon replaced with a larger belt/disk sander combo, which I still have. This powered strop worked extremely well, and I only stopped using it as I preferred the experience of handwork. I may resurrect it today, and see how it goes on a couple of chisels with the Hard Maple doors I am working on.

Regards from Perth

Derek

Messages In This Thread

Sharpening and buffing progression pictures *PIC*
Separate on the IH sorby chisels..
If the UK guys are correct...
Comparative Profile Pictures
Re: Comparative Profile Pictures
Re: Comparative Profile Pictures
I have never looked closely at...
Profile pictures *PIC*
Thoughts on the data
Scale of Image
Re: Thoughts on the data
Angle near the edge *PIC*
Re: Angle near the edge
Re: Angle near the edge
This is a difficult thing to do precisely
Re: Angle near the edge
Capturing the Unicorn Profile
Re: Capturing the Unicorn Profile
Outstanding work, Winston! *NM*
Re: Capturing the Unicorn Profile
but, do I need to?
Calcined alumina *PIC*
sounds like gunpowder...
Scratches from various compounds *PIC*
Scratches from more compounds; buff vs stick *PIC*
Other Compounds
Re: Other Compounds *PIC*
Correction
Re: Other Compounds - reinventing the wheel...
will do...
Well! good work
Red stuff
File in useless knowledge
partly my fault for voluminous posts..
hardness of iron oxide
Google monster says
Re: hardness of iron oxide
Wooden planes
Re: Wooden planes—Steve Voigt link *LINK*
Re: Wooden planes
Re: Wooden planes
Re: Wooden planes
Re: Wooden planes
Thanks, Jon!!
Re: Wooden planes
great experiments
Re: great experiments *PIC*
Re: Scratches from more compounds; buff vs stick
wait till you try...
The white stuff is...
Re: The white stuff is...
various compounds - difficult to judge
Re: various compounds - difficult to judge
looking forward to...
Further Observations
Some other things to try
Re: Some other things to try
Re: Some other things to try
Re: Some other things to try
I am anxious to try your suggestion *NM*
Interesting..
Re: Interesting..
not sure I agree
Re: not sure I agree
Re: not sure I agree
Re: not sure I agree
Re: not sure I agree
Factory ground *PIC*
Marples catalog...
Re: Factory ground
Re: Factory ground 1816 *PIC*
Re: Factory ground 1816
Re: Factory ground 1816 *PIC*
blogger grind
Re: blogger grind *PIC*
you're still failing...
after you do your survey, you'll find
Re: Factory ground 1816
Re: not sure I agree
I remember reading this...
great work
Thank you for experimenting
these results will require some study
David & Winston
Buffing wheel vs hard felt
Re: Buffing wheel vs hard felt
Re: Buffing wheel vs hard felt
Re: David & Winston
Thinking about establishing the Unicorn profile
Amen, Reverend
Re: Amen, Reverend
Tormek
if the tormek had a higher speed leather wheel...
Clarification, please
Re: Clarification, please
Re: Clarification, please
Re: Clarification, please
Re: Clarification, please
Preparing a beading blade
Re: Preparing a beading blade
for testing plane blade durability..
Re: Sharpening and buffing progression pictures
Re: Sharpening and buffing progression pictures
Suzuki Tool 4000
judging scratches
eek...expensive..
Re: Sharpening and buffing progression pictures
Re: Sharpening and buffing progression pictures
Re: Sharpening and buffing progression pictures
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081