Hand Tools Archive

Subject:
Question about jointer plane

Joe shelton
When using a jointer, how coarse a cut do you take? Under what circumstance do you vary the thickness of the shaving you take? How often do you take shavings that are around .003 or .004 inches?

Thanks for feedback.

Joe

Messages In This Thread

Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
No Clamps - Green Tape
good tip, question
Re: good tip, question
Re: good tip, question
Re: good tip, question
Re: good tip, question
neither reason is valid
Re: neither reason is valid
Re: neither reason is valid
Finishing for newbies..
Re: No Clamps - Green Tape
Unnecessary fretting
Re: Stuff still breaks at the glue joint
Re: Unnecessary fretting
The myth of too tight
Re: The myth of too tight
Re: The myth of too tight
Perhaps...
Fretting is vital
point made, and a new point
i certainly benefit
Re: Question about jointer plane
Woodworking made unnecesssarily complicated
Re: Woodworking made unnecesssarily complicated
clamping crutches- unnecessary
procedural question.....
Removing squeeze out
Removing squeeze out- unnecessary fretting
Re: Alternatives to Newspaper
why news paper is better, I hate pipe clamps
Bessey clamps are popular because of.....
Re: Bessey clamps are popular because of.....
Re: I also like the old K bodies..
I never liked them much...
Re: Bessey clamps are popular because of.....
Re: Bessey clamps are popular because of.....
Re: Bessey clamps are popular because of.....
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
Re: Question about jointer plane
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081