Messages Archive
Subject:
Based on the premise...Response To:
Re: Wampas drawer questions... () Barry Irby
"You can't break something that is already broken" Or it's more famous corollary, "MightASWell take a Shot....
I clamped it to my TS with a 1/8" shim under two corners and heated it with a heat gun. It seems to have worked. Slid into the chest nicely. I am giving it a day or two to see if it holds. I did go ahead and glue in the bottom.
In a fit of desperation I had planed about a 1/16 off the two offending corners. I checked those edges with a straight edge and straightened them. That helped. I think I got it.
Thanks for all the help.
I am retaining some drawer stock and leaving the jig set up, just in case.
Messages In This Thread
- Wampas drawer questions...
- Re: Wampas drawer questions...
- Based on the premise...
- Re: Wampas drawer questions...
- Question.
- Re: Wampas drawer questions...
- Re: Wampas drawer questions...
- Re: Wampas drawer questions...
- Re: Wampas drawer questions...
- Remake.....of course......
- The good news is...
- It's probably twist in the sides...
- Remake the drawer
- I'm in the re-make the drawer camp. *NM*
- Re: Wampas drawer questions...