Messages Archive

Subject:
that's the way to do it

Bill Tindall, E.Tn.
As mentioned the pins are friction fit so they can be removed as necessary. Using my set of number drills I chose a pilot hole that provided a snug friction fit. Holes were located and drilled as you describe. I used a sized wood strip to stand in for the glass for dry fitting the battens.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081