WoodCentral
❌

Reading view

βœ‡Busted Knuckle Woodworks
↗️

FREE UPDATE of my Zero Clearance Insert Bundle

By: Busted Knuckle Woodworks

πŸ’Ύ

While I was making some box joints for a project, I came up with a few improvements on the box joint inserts for my Impossible Table Saw Sled ZCI System. I think these are better, and I wanted to share them with you!

These new-and-improved box joint inserts are available FREE to everyone who purchased the original file bundle. Check out my Patreon video to find out how to get them now: https://www.patreon.com/posts/free-update-on-158028339

#woodworking #diy #tablesawsled #crosscutsled #zeroclearance #boxjoints #dado #3dprinting
  •  
  • ↗️
βœ‡Busted Knuckle Woodworks
↗️

They said it couldn't be done...

By: Busted Knuckle Woodworks

πŸ’Ύ

A table saw sled that NEVER wears out. Perfect cuts with zero tearout, EVERY time, FOREVER. Perfect regular AND dado cuts, of any size, on the SAME sled. Box joint jigs you can install and remove as needed. A fence that you can perfectly align, without any math, in less than 3 seconds.

Impossible, you say?

Learn how I put a completely new spin on the entire concept of a table saw sled and created… The β€œImpossible” Table Saw Sled!

Are you ready to make the very last sled you’ll ever need to build?

Let’s do this!

#woodworking #diy #tablesawsled #crosscutsled #zeroclearance
  •  
  • ↗️
βœ‡Busted Knuckle Woodworks
↗️

The crosscut sled that will outlive you

By: Busted Knuckle Woodworks

πŸ’Ύ

They said it couldn’t be done. A table saw sled that NEVER wears out. Perfect cuts with zero tearout, EVERY time, FOREVER. Perfect regular AND dado cuts, of any size, on the SAME sled. Box joint jigs you can install and remove as needed. A fence that you can perfectly align, without any math, in less than 3 seconds.

Impossible, you say?

Learn how I put a completely new spin on the entire concept of a table saw sled and created… The β€œImpossible” Table Saw Sled!

Are you ready to make the very last sled you’ll ever need to build? Let’s do this thing!

Discuss, ask questions, and share pics of your build with the community! https://www.patreon.com/chats/957f0e290523449a8f681e4d44657630

Check out these awesome Bambu Lab 3D printers I used to make this (affiliate links to make me stinkin’ rich πŸ€‘):
P2S: https://www.awin1.com/cread.php?awinmid=46345&awinaffid=2527591&ued=https%3A%2F%2Fbambulab.com%2Fen-us%2Fp2s
H2D: https://www.awin1.com/cread.php?awinmid=46345&awinaffid=2527591&ued=https%3A%2F%2Fbambulab.com%2Fen-us%2Fh2d

Files for all the parts shown in the video (33 in all) are available on my Patreon (no membership required): https://www.patreon.com/posts/146328939

- 8 Zero-Clearance Inserts, both long and short versions, compatible with either #8 wood screws or 1/4-20 cap screws
- 12 Box Joint Inserts in 1/4", 3/8" and 1/2" sizes, both long and short versions, compatible with either #8 wood screws or 1/4-20 cap screws),
-10 jigs to help you build the system,
- And a few extras thrown in!

(IMPORTANT: These are offered under a Standard Digital Non-Commercial License, which is included with the download. Please read it - it's short and contains important information.)

Ready to use pre-printed parts are available from Wittworks for a limited time: https://wittworks.shop/collections/bkw

Fully illustrated step-by-step build plans for the base system are also available: https://www.patreon.com/posts/impossible-table-147593545

Find me on:
Patreon: https://www.patreon.com/BustedKnuckleWoodworks
Instagram https://www.instagram.com/bustedknucklewoodworks
Facebook https://www.facebook.com/bustedknucklewoodwork

Huge shout-outs to Dustin Beeson @BearhawkStudio , Tom Thurner @coolabahwoodworking , and Suman Sarker @WoodcraftBySuman for their invaluable input.

Many thanks to Canyon Fire Tools @CanyonFireTools for the really cool T-Fence Micromag Adjuster (that thing rocks, go buy one: https://canyonfiretools.com )

Bill of Materials:

Plywood (check your local lumber supplier, and be sure to confirm the proper thickness before purchasing):
- plywood, 12 mil, 30” x 24”
- plywood, 6 mil, 30” x 24”
- plywood, 18 mil, 3-1/2” x 30”
- plywood, 6 mil, 3-1/2” x 30”
- plywood, 18 mil, 3-1/2” x 8” (2 pieces)

Hardware:
- #8 1/2” wood screws https://amzn.to/4aK7aDw
- #8 1-1/2” wood screws https://amzn.to/48Ar6aw

Threaded inserts (optional):
- Threaded inserts, 1/4-20 x 10mm https://amzn.to/3NcQYAQ
- Hex socket cap screws, 1/4-20 x 1/2” https://amzn.to/44lkMkJ

For our metric friends (optional):
- Threaded inserts, M6 x 1.0 x 10mm https://amzn.to/4spQkAv
- Hex socket cap screws, M6 x 1.0 x 10mm https://amzn.to/4j7FcUz

For T-track (optional):
- T-track https://amzn.to/4q6zeFD
- T-bolts https://amzn.to/48zJQHj
- T-bolt knobs https://amzn.to/3KrEPr7
- #6 1/2” wood screws https://amzn.to/44XT4L6

Chapters:
00:00 The last sled you’ll ever need to build
02:28 Building the base
07:58 Building the front fence
08:42 Building the back fence
11:36 Printing the first parts
13:13 How the inserts work
16:44 Using threaded inserts (optional)
18:22 Making dado cuts
19:05 Making box joints
19:49 Where to get the parts, files, and plans

#woodworking #diy #tablesawsled #crosscutsled #zeroclearance #boxjoints #dado #3dprinting #bambulab #bambulabP2S #bambulabh2d #makerworld #bambuhandy

(Some of the links that appear in this description may be affiliate links that help support the channel. If you click a link and make a purchase, I may earn a commission at no extra cost to you.)
  •  
  • ↗️
βœ‡Busted Knuckle Woodworks
↗️

SpringWell CSF1 Water Filtration System

By: Busted Knuckle Woodworks

πŸ’Ύ

Remove harmful water contaminants using my link https://influint.link/SpringWell-BKW and use code *Bustedknucklewoodworks10* for 10% off your SpringWell purchase. Thank you SpringWell for sponsoring this video!

Thank you to all of my Patreon fans, who give me the strength every day to keep doing this! Sign up and join the fun at https://www.patreon.com/BustedKnuckleWoodworks

Find me on Instagram https://www.instagram.com/bustedknucklewoodworks and Facebook https://www.facebook.com/bustedknucklewoodwork

If you’re anywhere in Texas, I heartily recommend ABC Home and Commercial Services for all your plumbing repair, installation, and upgrade needs. https://www.abchomeandcommercial.com

Items used in the video:

24 Inch long, 1 inch Water Heater Connector: https://amzn.to/47RA9Ds
1 inch PVC nipples (pack of 2): https://amzn.to/4qzPKzb

Chapters:

00:00 Why a water filtration system?
01:39 The SpringWell CSF1 system
04:02 ActiveFlow technology
06:43 The pre-plumb
08:37 Preparing the tanks and media
12:19 Laying out the installation
13:12 Installing the system
15:58 Testing the system
17:52 Benefits of the CSF1

#cleanwater #water #waterfilter #waterfiltration #watersoftener #hardwater #waterconditioning #springwell #csf1 #cf1 #fs1

(Some of the links that appear in this description may be affiliate links that help support the channel. If you click a link and make a purchase, I may earn a commission at no extra cost to you.)
  •  
  • ↗️
βœ‡Busted Knuckle Woodworks
↗️

Why are speed squares so under appreciated?

By: Busted Knuckle Woodworks

πŸ’Ύ

Join me as I reveal the century-old mysteries of the most misunderstood and under-appreciated tool in your shop β€” the speed square! What are all those strange numbers for? The weird lines going everywhere? What does the β€˜pivot’ do? And what’s with that diamond cutout thing? Watch this video, and start wielding your speed square like a pro! Stay tuned to the end for a chance to win 6 MONTHS of paid-tier membership on my Patreon!

Check out the Bambu Lab H2D All-in-one DIY powerhouse: https://www.awin1.com/awclick.php?gid=570772&mid=46345&awinaffid=2527591&linkid=4382702&clickref= #bambulab #bambuH2D

Thank you to all of my Patreon fans, who give me the strength every day to keep doing this!
Sign up and join the fun at https://www.patreon.com/BustedKnuckleWoodworks

Find me on Instagram https://www.instagram.com/bustedknucklewoodworks and Facebook https://www.facebook.com/bustedknucklewoodwork

Much thanks to Bridgid at @dinkles_woodshop for the super-fun animations. She’s an amazing talent and if you don’t follow her socials, you’re truly missing out.

Many thanks also to Michael at @NeedItMakeIt for lending me some of the footage in this video. Dude is the man to follow if you’re into 3D printing!

Items used in the video:
Swanson Speed Squares https://amzn.to/4gq4f3S
JessEm Quick Angle Square https://jessem.com/products/quick-angle-square?sca_ref=6879348.BxX8TnWM5RFsw
Milwaukee Rafter square, 7” https://www.homedepot.com/p/Milwaukee-7-in-Rafter-Square-MLSQ070/309863275
Empire Poly Rafter Square https://amzn.to/47l6AsP
Husky 2-in-1 Extendable Square https://amzn.to/3IYwlXr
Johnson Stair Gauges https://amzn.to/46vyC5n

(Some of the links that appear in this description may be affiliate links that help support the channel. If you click a link and make a purchase, I may earn a commission at no extra cost to you.)

Chapters:
00:00 The mysterious speed square
00:41 Origins of the speed square
01:46 Types, sizes, and features
02:31 Heel and pivot
02:49 The degree scale
04:03 Stair gauges
04:27 The common scale
04:43 Introduction to rafters
05:09 Common rafters
05:50 Roof pitch explained
07:36 Laying out the plumb cut (common rafter)
08:01 Common rafter length using a table
08:37 Common rafter length using a framing square
09:08 Common rafter length using the Pythagorean Theorem
10:41 Laying out the heel cut (common rafter)
10:57 Laying out the seat cut (common rafter) using the β€˜diamond’
12:03 Laying out the eave cut (common rafter)
12:21 Fitting a common rafter
13:18 Introducing my new Bambu Lab H2D!
15:21 Introduction to hip and valley rafters and the β€˜HIP-VAL’ scale
16:23 Laying out the plumb cut (hip rafter)
16:52 Why the common and hip-val scales differ
17:15 Laying out the heel, seat, and eave cuts (hip rafter)
17:57 Finding the pitch of an existing roof
18:59 Other uses for the speed square
19:30 WIN a Patreon membership and a FREE t-shirt!

#woodworking #diy #speedsquare #raftersquare #framingsquare #roofing #rafters #swansontoolcompany #jessem #milwaukeetools #makerworld #bambuhandy
  •  
  • ↗️
❌