This is the last of my snakewood. Endgrain checking is next to none. I probably treated the ends with CA glue 5 or 10 years ago. The size of this log is about 12 1/2 inches long and the oblong sizing is 4 to 5 inches overall see the pics for more clarification. The weight of this log is 9 lbs. 6 oz. this piece has been wrapped with stretch wrap as well as CA glue where needed this piece is a beauty. $200 plus insurance in shipping. I have had very good success with the pieces that came from...

Read more

This African Blackwood, natural edge, blank will make a unique piece. Dry and ready to turn. This piece is about 8 3/4 of an inch long 6 inch wide and 2 1/2 inch thick. The weight is 3 pounds and 12 ounces.
$45 plus shipping

This piece is nice and dry and ready to turn into a unique bowl. About 8 3/4 of an inch long 6 inch width and 2 1/2 inches thick. It weighs about 3 lbs. 12 oz.. $45 plus shipping

This African Blackwood, natural edge, blank will make a unique piece. Dry and ready to turn. This piece is about 8 3/4 of an inch long 6 inch wide and 2 1/2 inch thick. The weight is 3 pounds and 12 ounces.
$45 plus shipping

This is the last of my snakewood. Endgrain checking is next to none. I probably treated the ends with CA glue 5 or 10 years ago. The size of this log is about 12 1/2 inches long and the oblong sizing is 4 to 5 inches overall see the pics for more clarification. The weight of this log is 9 lbs. 6 oz. this piece has been wrapped with stretch wrap as well as CA glue where needed this piece is a beauty. $200 plus insurance in shipping. I have had very good success with the pieces that came from...

Read more

This piece is nice and dry and ready to turn into a unique bowl. About 8 3/4 of an inch long 6 inch width and 2 1/2 inches thick. It weighs about 3 lbs. 12 oz.. $45 plus shipping

I got this 3 x 3 x 12 piece of African black wood somewhere between 12 and 15 years ago. The actual sizes are more like 3 1/8 of an inch by 3 1/8 of an inch by 12 1/2 inch. The weight is 6 pounds. $150 plus shipping and insurance. There is no sign of checking that I can see on this, but the ends were lightly waxed before shipping from Belforest. It’s in the actual shipping packing provided by Bell Forest the little bit of sap wood probably would go away after trimming to a true 3 inch size...

Read more

Sat on shelf 10 years at least.
7”x7”x11”
$15 plus shipping
High concentration of eyes

@garyswf got me motivated to do some flat work, and I’ve had a couple pieces of ambrosia maple in the corner of my shop. This was cut from narrowest section and trimmed natural edges where thinned. Finished piece roughly 12 x 18” with tung oil. May put another coat on after doing some filling of beetle holes.

This goes way back to a time when a WB’r named Joe Rebuild was around. I got a couple pieces and turned one of them and put the other in storage. Probably 8-10 years ago. I’ll dig up the thread if I can. Here is thread
9 x 5.25 x 5.25. About 6.5 lbs
$35 plus shipping from 31636. One small check in pics should turn out.
Let me know your preference for shipping from Pirate Shipping…I.e USPS, UPS Ground or UPS...

Read more

Back in 2013 I helped my BIL take down a walnut tree outside my sisters kitchen window. Pretty good sized tree, this piece being at center of 3 cores. So fast forward when I remember us finding about a one inch piece of scissors tip imbedded in the blank by the telltale staining which is now the highlight of the piece. I still need to reverse and remove the tenon and I’m thinking about ordering some tung oil after seeing redwood piece by @Alancw . My BIL just recently...

Read more

I’ve had this for a long time, the little flat area on top would make for an excellent sturdy base a favorite kill, or a primo casting.
12” x 13” x 4-1/2”,
6-7 lbs shipped.
$55 plus shipping from 31636

Big blonde buckeye Burl, lots of possibilities including dying as I did with hollow form in pic.
9” x 9” x 15”, 12 lbs incl shipping , dry in shop for approximately 7-8 yr.
$75 plus shipping from 31636.











[ATTACH...

Read more

Used this a handful of times, takes practice to be good. I ended up getting threading tool that I can feed at slower pace, so don’t need this one.
16 tpi, other thread counts available

The armrest is not included with these sets if you shop around. Set typically $150 and armrest $50

$75 plus shipping

@Friedrich9 , @Big Ry , @daniscool , @Mr. Peet
Ok guys, I’m going out on a limb even using term ironwood, but it has a density of about 69.84 pcf, not a floater. I sanded both sides of oxidation and sanded ends thru grits to 600. The end grain shots are 1-1/8” across. I don’t have microscope but using 10x pores seem tight and uniform. I don’t have much sense of smell but my wife likened the fresh cut as sweet and...

Read more

@Bootleg has first refusal on this.
Dry in shop 7-8 years.
No checking just one void about 3/4” deep then stops. See pic
9” x 9” x 5”
Will ship in MFRB from 31636 via Pirate ship
$35 plus shipping

I’ve had this for a long time, the little flat area on top would make for an excellent sturdy base a favorite kill, or a primo casting.
12” x 13” x 4-1/2”,
6-7 lbs shipped.
$55 plus shipping from 31636

Big blonde buckeye Burl, lots of possibilities including dying as I did with hollow form in pic.
9” x 9” x 15”, 12 lbs incl shipping , dry in shop for approximately 7-8 yr.
$75 plus shipping from 31636.

This goes way back to a time when a WB’r named Joe Rebuild was around. I got a couple pieces and turned one of them and put the other in storage. Probably 8-10 years ago. I’ll dig up the thread if I can. Here is thread
9 x 5.25 x 5.25. About 6.5 lbs
$35 plus shipping from 31636. One small check in pics should turn out.
Let me know your preference for shipping from Pirate Shipping…I.e USPS, UPS Ground or UPS...

Read more

Bone dry in shop at least 15 years. Hairline cracks circled.
6 lb , 5 oz
5-1/2 x 2-3/4 x14-3/4
$25 plus shipping