Top
WC logo MENU
View ThreadPost ResponseReturn to IndexRead Prev MsgRead Next Msg
Messages
Finishing Tip
Posted By Mark Mandell - Gone Round In New Jersey
Date Thursday, 2 June 2022, at 10:41 a.m.

For those here who like to rub out their finishes to gloss, especially in open-pore woods, it can be a bit of a hassle with respect to rubbing compound in the wood pores.

Simple solution is to clean the stuff out of the pores.  Tools needed are a spray bottle to apply a light spray of water with a bit of dish detergent, compressed air and a small blow gun tip, and a soft rag.  Spray the surface with a light mist then use the blow gun to blast out the pores then wipe clean with the soft cloth.

Little white specks are gone.

 

Messages In This Thread

Post Response

Your Name
Your E-Mail Address
Subject
Message
If you'd like to have the option of deleting your post later, please provide a password (CASE SENSITIVE!):
Password
 If you'd like e-mail notification of responses, please check this box
Accept Terms of Service

 
View ThreadPost ResponseReturn to IndexRead Prev MsgRead Next Msg

faq
Frequently Asked Questions on using forums



Oneway Manufacturing - Superor Design, Legendary Quality

Shop Amazon using this affiliate link, and Amazon will pay WoodCentral a commission on anything you buy. The commission is used in paying the costs of maintaining this site, and the price you pay on Amazon is NOT affected by using this link.


Messages Hand Tools Turning Classifieds Feedback SANDBOX
Copyright © 1998-2022 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by any meanswithout the written permission of the publisher.

WOODCENTRAL, P.O. BOX 274, COOPERSBURG, PA 18036