Re: Comb- only good for slow drying paint Messages

View Thread Post Response Return to Index Read Prev Msg Read Next Msg

Messages

Re: Comb- only good for slow drying paint

Date Thursday, 14 April 2022, at 9:37 p.m.

In Response To Comb- only good for slow drying paint (Bill Tindall, E.Tn.)

Dick Coers
I never stick the comb in the finished piece of furniture. I sprayed out on a 1' square piece of plywood and I had plenty of time to stick the comb in. I don't want divots in the finished piece.

Messages In This Thread

Conversion Varnish Outgassing -- howard gorman -- Monday, 11 April 2022, at 8:30 p.m.
- Re: Conversion Varnish Outgassing -- Bill Tindall, E.Tn. -- Tuesday, 12 April 2022, at 8:19 a.m.
- Patience -- Mark Mandell - Gone Round in New Jersey -- Tuesday, 12 April 2022, at 2:19 p.m.
  - Re: Patience -- Bill Tindall, E.Tn. -- Tuesday, 12 April 2022, at 3:03 p.m.
- Film thickness? -- Dick Coers -- Tuesday, 12 April 2022, at 5:28 p.m.
  - Even more important... -- Bill Tindall, E.Tn. -- Tuesday, 12 April 2022, at 8:36 p.m.
  - Re: Film thickness? -- howard gorman -- Wednesday, 13 April 2022, at 11:07 a.m.
    - Re: Film thickness? *LINK* -- Sgian Dubh -- Wednesday, 13 April 2022, at 12:18 p.m.
      - Re: Film thickness? -- Bill Tindall, E.Tn. -- Wednesday, 13 April 2022, at 10:35 p.m.
        
        Re: Film thickness? -- Sgian Dubh -- Thursday, 14 April 2022, at 2:24 a.m.
        
        Conversion varnish defined -- Bill Tindall, E.Tn. -- Thursday, 14 April 2022, at 2:27 p.m.
        
        Re: Conversion varnish defined -- Sgian Dubh -- Thursday, 14 April 2022, at 3:05 p.m.
        
        Some Manufacturers -- Mark Mandell - Gone Round in New Jersey -- Thursday, 14 April 2022, at 5:42 p.m.
        
        Film combs and Zahn cups, same catergory -- Dick Coers -- Thursday, 14 April 2022, at 10:01 a.m.
        
        Comb- only good for slow drying paint -- Bill Tindall, E.Tn. -- Thursday, 14 April 2022, at 8:23 p.m.
        
        Re: Comb- only good for slow drying paint -- Dick Coers -- Friday, 15 April 2022, at 3:40 p.m.
        
        Re: Comb- only good for slow drying paint -- Sgian Dubh -- Saturday, 16 April 2022, at 6:05 a.m.
        
        corrected claim -- Bill Tindall, E.Tn. -- Monday, 18 April 2022, at 9:53 a.m.
        
        Re: corrected claim -- Sgian Dubh -- Monday, 18 April 2022, at 3:30 p.m.
  - I spray by look snot thickness -- Bill Tindall, E.Tn. -- Thursday, 14 April 2022, at 2:19 p.m.
    - Re: I don't think snot is a good standard *NM* -- Hank Knight -- Saturday, 16 April 2022, at 3:49 p.m.
      - Re: a good standard -- Mark Mandell - Gone Round in New Jersey -- Saturday, 16 April 2022, at 4:41 p.m.
        
        (Message Deleted by Poster) -- Bill Tindall, E.Tn. -- Monday, 18 April 2022, at 10:21 a.m.
        
        No, Bill. -- Mark Mandell - Gone Round in New Jersey -- Monday, 18 April 2022, at 11:58 a.m.
        
        Oh....! -- Bill Tindall, E.Tn. -- Monday, 18 April 2022, at 12:22 p.m.
        
        Re: Oh....! -- AZ in Colorado Springs -- Tuesday, 19 April 2022, at 9:37 p.m.
  - Re: Wet Film thickness for spray applied coating *LINK* -- E Phillip Smith -- Thursday, 14 April 2022, at 4:03 p.m.

Post Response

Your Name
Your E-Mail Address
Subject
Message

If you'd like to have the option of deleting your post later, please provide a password (CASE SENSITIVE!):
Password
If you'd like e-mail notification of responses, please check this box

Accept Terms of Service

View Thread Post Response Return to Index Read Prev Msg Read Next Msg

Messages is maintained by Ellis Walentine

Frequently Asked Questions on using forums

Oneway Manufacturing - Superor Design, Legendary Quality

Shop Amazon using this affiliate link, and Amazon will pay WoodCentral a commission on anything you buy. The commission is used in paying the costs of maintaining this site, and the price you pay on Amazon is NOT affected by using this link.