Features Forums w h t b c o f
View ThreadPost ResponseRETURN TO INDEX<PreviousNext>
Hand Tools
New storage box for chisels
Posted By Derek Cohen (in Perth, Australia)
Date Tuesday, 11 January 2022, at 10:25 a.m.

Derek Cohen (in Perth, Australia)
A decade ago (!), while road testing the new Veritas chisels (then only O1 was available), I built a box partly to house them and partly to demonstrate them in use ...

This coming weekend I shall be part of a dovetailing workshop, and decided that it was time to build a new box for these chisels. These are the chisels I use in demonstrations, such as wood shows.

For one thing, the number has grown from 5 to 7 chisels (I had made a 1/8" from a spare pre-production 1/4" - this was before this size was available from Veritas - as well as a 3/8" fishtail chisel. At some stage Veritas will be producing their own version. I do not have any details).

A second factor was that I thought the existing box was a little OTT, and wanted something more subtle, and less in-your-face. The fact is that the joinery in the new box is far more demanding than the first box, but only those experienced might recognise this.

It has been a month or more since I have had any regular time in the workshop. My practice has been crazy busy, but now I have a few weeks leave. In particular, I had some time free yesterday and today. This has been therapeutic and fun. I hope others get something from the details here ....

The light wood is Jacaranda (in both boxes), which is the last harvested from a tree on our property several years ago. It is softish, not so nice to saw and dovetail, but planes beautifully. The darker wood is Makore. Another wonderful wood to work with.

The construction of the box is mainly mitred through dovetails - all lower corners and the end upper corners. This makes it easier to plough through grooves for the base and top. The mitred corners are also, in my view, far more aesthetic, lending a balanced presentation from the top.

The sides are held in a sticking board when ploughing grooves with the Small Plow.

The rebates were planed with a skew block plane and then fine tuned with a rebate plane. This is the main use I find for rebate planes ...

This is the underside ...

And from the upper side ...

The finger depression was carved with chisels ...

Inside the box, the chisels are held very firmly with a combination of rare earth magnets and individualised spaces for each chisel ..

The O1 Veritas chisels differ from the PM-V11 chisels in that their ferrules are square at the front, while the PM-V11 are curved (I do have a set of both, with the PM used in the workshop) ...

This square section enables the design to butt them fore- and aft. They cannot move about. Plus the magnets hold them firmly as well.

Regards from Perth

Derek

 
  

Messages In This Thread
  • New storage box for chisels -- Derek Cohen (in Perth, Australia) -- Tuesday, 11 January 2022, at 10:25 a.m.

Post Response

Your Name
Your E-Mail Address
Subject
Message
If you'd like to have the option of deleting your post later, please provide a password (CASE SENSITIVE!):
Password
 If you'd like e-mail notification of responses, please check this box
Accept Terms of Service

 

Please read Terms of Use before posting

View ThreadPost ResponseRETURN TO INDEX<PreviousNext>

Sponsors

Lee Valley
Dedicated to finding and developing the best tools in the industry.
WoodCraft
One of the nation's oldest and largest suppliers of quality woodworking tools and supplies.
Woodfinder
Support Us

Advertise Here

Support Us Advertise Terms Privacy DMCA Help Home

Copyright © 1998-2022 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by any means without the written permission of the publisher.

WoodCentral · POB 274 · Coopersburg PA 18036 USA