Re: I'll make a guess.... Hand Tools

View Thread Post Response RETURN TO INDEX <Previous Next>

Hand Tools

Re: I'll make a guess....

Date Monday, 27 June 2022, at 4:35 p.m.

In Response To Re: I'll make a guess.... (David Weaver)

David, it is good to read your responses.

I have, and use, the chisels you kindly sent.� Have had good results.� As to the "trash" knife........IT AIN'T TRASH.� Regards, and hope all is well.

Messages In This Thread

David Weaver Chisels -- Wiley Horne -- Thursday, 9 June 2022, at 2:11 p.m.
- Re: David Weaver Chisels -- Brad Chenoweth -- Thursday, 9 June 2022, at 3:27 p.m.
- Re: David Weaver Chisels -- Bruce, a MN Galoot -- Thursday, 9 June 2022, at 3:42 p.m.
  - Re: David Weaver Chisels -- Philip F Duffy -- Thursday, 9 June 2022, at 4:50 p.m.
- Re: David Weaver Chisels -- Steve D, in CT -- Thursday, 9 June 2022, at 9:14 p.m.
- Re: David Weaver Chisels -- Derek Cohen (in Perth, Australia) -- Friday, 10 June 2022, at 12:47 a.m.
  - Re: David Weaver Chisels -- Wiley Horne -- Friday, 10 June 2022, at 2:12 p.m.
    - Re: David Weaver Chisels -- Warren in Lancaster, PA -- Friday, 10 June 2022, at 3:45 p.m.
    - Re: David Weaver Chisels -- Paul in NJ -- Friday, 10 June 2022, at 4:29 p.m.
    - Re: David Weaver Chisels -- Rafael from PA -- Friday, 10 June 2022, at 4:48 p.m.
    - Re: David Weaver Chisels -- TomD -- Tuesday, 14 June 2022, at 3:49 p.m.
      - Re: David Weaver Chisels *NM* -- Larry Barrett -- Wednesday, 15 June 2022, at 8:40 a.m.
- Treasures -- John Jesseph -- Friday, 10 June 2022, at 12:00 p.m.
  - Lost track of David -- Bruce McCrory -- Friday, 10 June 2022, at 1:21 p.m.
    - Re: Lost track of David -- Bruce, a MN Galoot -- Friday, 10 June 2022, at 4:36 p.m.
- Not mentioned....the handle and heat treat -- Bill Tindall, E.Tn. -- Saturday, 11 June 2022, at 6:56 a.m.
  - Re: Not mentioned....the handle and heat treat -- Warren in Lancaster, PA -- Saturday, 11 June 2022, at 9:16 a.m.
    - what is not straightforward -- Bill Tindall, E.Tn. -- Saturday, 11 June 2022, at 9:55 a.m.
    - Re: Not mentioned....the handle and heat treat -- Derek Cohen (in Perth, Australia) -- Saturday, 11 June 2022, at 10:01 a.m.
    - Re: Not mentioned....the handle and heat treat -- roger lance -- Saturday, 11 June 2022, at 12:03 p.m.
- Some thoughts on vintage steel from David -- Bill Tindall, E.Tn. -- Sunday, 12 June 2022, at 10:06 p.m.
  - Re: Some thoughts on vintage steel from David -- Charlie -- Monday, 13 June 2022, at 5:04 a.m.
- Reality with the steel -- David Weaver -- Tuesday, 21 June 2022, at 11:20 a.m.
  - Re: Reality with the steel -- Paul in NJ -- Tuesday, 21 June 2022, at 4:15 p.m.
    - Re: Reality with the steel -- David Weaver -- Tuesday, 21 June 2022, at 8:17 p.m.
  - Re: Reality with the steel -- Charlie -- Wednesday, 22 June 2022, at 5:07 a.m.
  - Re: Reality with the steel -- Warren in Lancaster, PA -- Wednesday, 22 June 2022, at 11:39 a.m.
    - Re: Reality with the steel -- David Weaver -- Wednesday, 22 June 2022, at 1:23 p.m.
      - Re: Reality with the steel -- Wiley Horne -- Wednesday, 22 June 2022, at 6:09 p.m.
        
        Re: Reality with the steel -- David Weaver -- Wednesday, 22 June 2022, at 7:19 p.m.
        
        Re: Reality with the steel -- Wiley Horne -- Wednesday, 22 June 2022, at 8:30 p.m.
        
        Re: Reality with the steel -- David Weaver -- Thursday, 23 June 2022, at 9:58 a.m.
    - Re: Reality with the steel -- Charlie -- Wednesday, 22 June 2022, at 2:46 p.m.
      - Apparently you missed the point -- Bill Tindall -- Wednesday, 22 June 2022, at 7:53 p.m.
        
        Re: Apparently you missed the point -- Charlie -- Saturday, 25 June 2022, at 10:05 a.m.
      - Re: Reality with the steel -- Warren in Lancaster, PA -- Thursday, 23 June 2022, at 6:43 a.m.
        
        Re: Reality with the steel -- David Weaver -- Thursday, 23 June 2022, at 12:21 p.m.
        
        " it increases the edge cross section" -- David Weaver -- Thursday, 23 June 2022, at 12:47 p.m.
        
        Re: Reality with the steel -- Charlie -- Thursday, 23 June 2022, at 1:10 p.m.
        
        Re: Reality with the steel -- Charlie -- Thursday, 23 June 2022, at 1:12 p.m.
        
        The only one... -- David Weaver -- Thursday, 23 June 2022, at 1:53 p.m.
        
        Re: The only one... -- Charlie -- Thursday, 23 June 2022, at 3:25 p.m.
        
        Where can anyone buy a set -- Bill Tindall -- Friday, 24 June 2022, at 9:10 a.m.
        
        Re: Where can anyone buy a set -- David Weaver -- Friday, 24 June 2022, at 10:17 a.m.
        
        The "buy a set part" -- David Weaver -- Friday, 24 June 2022, at 10:55 a.m.
        
        Re: Where can anyone buy a set -- Warren in Lancaster, PA -- Friday, 24 June 2022, at 6:56 p.m.
        
        A wonderful tramp down memory lane … *NM* -- Derek Cohen (in Perth, Australia) -- Friday, 24 June 2022, at 8:34 p.m.
  - Re: Reality with the steel -- TomD -- Thursday, 23 June 2022, at 3:56 p.m.
    - I'm not sure... -- David Weaver -- Thursday, 23 June 2022, at 4:18 p.m.
      - I'll rise to that bait..... -- Bill Tindall -- Thursday, 23 June 2022, at 9:26 p.m.
        
        Re: I'll rise to that bait..... -- David Weaver -- Friday, 24 June 2022, at 9:41 a.m.
        
        I'll make a guess.... -- Bill Tindall -- Friday, 24 June 2022, at 11:11 a.m.
        
        Re: I'll make a guess.... -- David Weaver -- Friday, 24 June 2022, at 11:23 a.m.
        
        Re: I'll make a guess.... -- Bill White -- Monday, 27 June 2022, at 4:35 p.m.
        
        Re: I'll make a guess.... -- David Weaver -- Tuesday, 28 June 2022, at 4:15 p.m.
- Nice to look at, but has anyone made anything with one of these chisels? -- Bill Tindall -- Monday, 27 June 2022, at 9:31 a.m.

Post Response

Your Name
Your E-Mail Address
Subject
Message

If you'd like to have the option of deleting your post later, please provide a password (CASE SENSITIVE!):
Password
If you'd like e-mail notification of responses, please check this box
Please read Terms and Conditions of Service (TACOS) before posting Accept Terms of Service Password problems?

View Thread Post Response RETURN TO INDEX <Previous Next>

Hand Tools is maintained by Administrator

Recent Site Comments

Rick Hansen on A game-changing NEW way to sharpen! (Scary SHARPER!) by Stumpy Nubs at 8:06pm (3rd-Jun)
Johanna on Rustproofing Tools by Bob Smalser at 5:15pm (3rd-Jun)
TomD on Maintaining Traditional Oil Skins and Tin Cloth by Bob Smalser at 3:12pm (27th-May)
Surface International on Sand Blasting Basics: - Surprisingly useful capabilities for home and shop by Ed Lance at 1:00am (19th-May)
Groucho on STARTIN' 'EM YOUNG by Ellis Walentine at 10:57pm (16th-May)
Groucho on STARTIN' 'EM YOUNG by Ellis Walentine at 4:27pm (16th-May)
Stuart Vencill on Maintaining Traditional Oil Skins and Tin Cloth by Bob Smalser at 8:51pm (13th-May)
Dave Prebble on Rustproofing Tools by Bob Smalser at 8:02am (12th-May)
Andy on Door Pulls For A Tall Cabinet by Ellis Walentine at 4:53pm (9th-May)
Peter Martin on Door Pulls For A Tall Cabinet by Ellis Walentine at 4:26pm (9th-May)
Peter Martin on Phrugal Photo Studio by Jamie Donaldson at 5:32am (4th-May)
Raghav on Sand Blasting Basics: - Surprisingly useful capabilities for home and shop by Ed Lance at 1:08am (28th-Apr)
Peter Martin on Mountain-Man Breakfast || Feeds an army! by AvE at 8:16am (24th-Apr)
Bruce Fleming on Alcohol soaking method for drying bowls by Dave Smith at 1:08am (23rd-Apr)
Peter Martin on Best Selection of Japanese Carpentry Woodworking Tools near Tokyo, Japan - Sagami Daiku Dougu Kan by The Carpentry Life at 7:55am (16th-Apr)
Jozef Dej on Best Selection of Japanese Carpentry Woodworking Tools near Tokyo, Japan - Sagami Daiku Dougu Kan by The Carpentry Life at 5:55am (16th-Apr)
Andy on Straightening Bent Handsaw Blades by Bob Smalser at 10:56am (5th-Apr)