Found the camber jig Hand Tools

View Thread Post Response RETURN TO INDEX<Previous Next>

Hand Tools

Found the camber jig

Posted By Dick Coers

Date Thursday, 9 June 2022, at 1:49 p.m.

In Response To Re: This would also work for putting a camber on a blade! (Dick Coers)

This was for a very shallow radius and about the very max length of dowel!

Messages In This Thread

Lee Valley Grinder Tool Rest and Angle-Setting Gauge Question -- David Shoultz -- Thursday, 2 June 2022, at 6:08 p.m.
- I have no need for this device -- William Tindall -- Thursday, 2 June 2022, at 6:21 p.m.
  - Re: I have no need for this device -- David Shoultz -- Thursday, 2 June 2022, at 9:30 p.m.
    - Three options -- Derek Cohen (in Perth, Australia) -- Saturday, 4 June 2022, at 1:43 a.m.
      - Note for admin -- Derek Cohen (in Perth, Australia) -- Saturday, 4 June 2022, at 1:47 a.m.
  - Re: I have no need for this device -- William Duffield -- Friday, 3 June 2022, at 1:17 p.m.
    - gave mine away too- too flimsy -- William Tindall -- Friday, 3 June 2022, at 4:44 p.m.
      - Re: gave mine away too- too flimsy -- William Duffield -- Saturday, 4 June 2022, at 1:24 a.m.
        
        Re: gave mine away too- too flimsy -- Ron MacLaren -- Saturday, 4 June 2022, at 10:08 a.m.
    - Thank you -- David Shoultz -- Saturday, 4 June 2022, at 12:03 p.m.
    - NEW QUESTION - Wolverine Sharpening System -- David Shoultz -- Saturday, 4 June 2022, at 2:18 p.m.
      - Re: NEW QUESTION - Wolverine Sharpening System -- roger lance -- Saturday, 4 June 2022, at 2:24 p.m.
      - Re: NEW QUESTION - Wolverine Sharpening System -- Dick Coers -- Saturday, 4 June 2022, at 3:19 p.m.
        
        Re: NEW QUESTION - Wolverine Sharpening System -- William Duffield -- Saturday, 4 June 2022, at 4:17 p.m.
        
        Re: I DID IT....and now a new question -- David Shoultz -- Saturday, 4 June 2022, at 6:59 p.m.
        
        Re: I DID IT....and now a new question -- William Duffield -- Saturday, 4 June 2022, at 7:15 p.m.
        
        Or … -- Derek Cohen (in Perth, Australia) -- Saturday, 4 June 2022, at 8:56 p.m.
        
        Re: I DID IT....and now a new question -- Dick Coers -- Saturday, 4 June 2022, at 11:24 p.m.
        
        What is a Vee arm *NM* -- William Tindall -- Sunday, 5 June 2022, at 7:43 a.m.
        
        Re: What is a Vee arm -- Dick Coers -- Tuesday, 7 June 2022, at 2:20 p.m.
        
        Re: What is a Vee arm -- David Shoultz -- Wednesday, 8 June 2022, at 7:26 p.m.
        
        Re: What is a Vee arm -- Dick Coers -- Thursday, 9 June 2022, at 1:26 p.m.
        
        This would also work for putting a camber on a blade! -- David Shoultz -- Wednesday, 8 June 2022, at 7:29 p.m.
        
        Re: This would also work for putting a camber on a blade! -- Dick Coers -- Thursday, 9 June 2022, at 1:30 p.m.
        
        Found the camber jig -- Dick Coers -- Thursday, 9 June 2022, at 1:49 p.m.
        
        Re: Vee arm FYI -- William Duffield -- Thursday, 9 June 2022, at 11:40 a.m.
        
        Plane blade grinding -- Dick Coers -- Tuesday, 7 June 2022, at 2:21 p.m.
        
        Upside down Veritas Tool Rest? -- David Shoultz -- Wednesday, 8 June 2022, at 7:32 p.m.
        
        Re: Upside down Veritas Tool Rest? -- Dick Coers -- Thursday, 9 June 2022, at 1:33 p.m.
        
        Can be purchased separately -- Dick Coers -- Thursday, 9 June 2022, at 1:35 p.m.
- Re: Lee Valley Grinder Tool Rest and Angle-Setting Gauge Question -- Steve D, in CT -- Thursday, 2 June 2022, at 8:09 p.m.
  - Re: Lee Valley Grinder Tool Rest and Angle-Setting Gauge Question -- David Shoultz -- Thursday, 2 June 2022, at 9:34 p.m.
- Re: Lee Valley Grinder Tool Rest and Angle-Setting Gauge Question -- Derek Cohen (in Perth, Australia) -- Friday, 3 June 2022, at 8:38 a.m.
  - Re: Lee Valley Grinder Tool Rest and Angle-Setting Gauge Question -- David Shoultz -- Saturday, 4 June 2022, at 11:59 a.m.
  - Re: Lee Valley Grinder Tool Rest and Angle-Setting Gauge Question -- William Duffield -- Thursday, 9 June 2022, at 12:11 p.m.

Post Response

Your Name
Your E-Mail Address
Subject
Message

If you'd like to have the option of deleting your post later, please provide a password (CASE SENSITIVE!):
Password
If you'd like e-mail notification of responses, please check this box
Please read Terms of Use before posting Accept Terms of Service

View Thread Post Response RETURN TO INDEX<Previous Next>

Hand Tools is maintained by Administrator

Gallery Marketplace WoodFinder® Help Contact Us Support Us Amazon Search System Status Advertise DMCA Privacy Policy Terms of Service

Copyright © 1998 - 2023 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by any means without the written permission of the publisher.

WoodCentral · POB 274 · Coopersburg PA 18036 USA

From the Gallery