Turning

Subject:
Re: recess vs tenon *PIC*
Response To:
Re: recess vs tenon ()

John K Jordan
>>>The recess usually provides a solid mounting of the work piece that provides good support for sanding, polishing...

As described here in the past, I remove the piece from the lathe for final smoothing with hand scrapers and sanding with ROS or by hand. The recess holds it securely while I work on the top/inside. By this time the bottom is completely done, using the same methods.

JKJ

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081