Turning

Subject:
...jam chucks.

John K Jordan
>>>I've made my chucks a bit smaller in diameter and lined them with glued-in pieces of scrap leather as recommended by a ball-turner in our club.

If doing a lot of spheres, making one for the headstock with a Morse Taper is handy, and one for the live center, either threaded or held by compression. I used a couple of Rubber Chucky pieces and turned a depression in each.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081