Turning

Subject:
Re: Old Delta tailstock.....

john lucas
That was my thought. It might not be self ejecting or the center put in may be too short. If there is a protruding area between the center and the Quill try putting a screw driver or some other tapered tool in there and tap on it to see if it will knock the live center out. I've had to knock out drive centers on lathes where it was stuck using that method.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081