Turning

Subject:
Re: Powermatic 3520B
Response To:
Re: Powermatic 3520B ()

mikeee12345
Locate the speed sensor and verify there is a target positioned on the spindle
that the sensor can read. You might also check the wiring going to and from the
sensor and the terminations to verify it is still intact.

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081