Turning

Subject:
cutter, and light
Response To:
Re: Threaded Ebony box ()

John K Jordan
Yes, the cutter (I think) is 3/4" in diameter or so. The thread ID of both of the two smaller boxes is about 1". I cut internal threads on the base of the one on the right as an experiment, the others have internal threads in the lid.

I forgot to mention in the original post - I used no finish on these other than a little buffing/polishing the bare wood.

Also, I see I got a little light leakage making a blue shadow on these. Must be from the one light in the room I forgot to turn off, a small gooseneck lamp at the sharpening station about 10' away. Doesn't take much!

JKJ

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081