76 77 78 79 80 81 82

Turning

Message Index

Another stupid question.
Problem with Jet Mini Lathe
Re: Problem with Jet Mini Lathe
Re: Problem with Jet Mini Lathe
Re: Problem with Jet Mini Lathe
hand wheel is threaded on
***SURVEY #100 -- THE IDES OF MAY*** *LINK*
You don't need a vacuum pump......
Once you go Vac you won't turn back :)
Re: Once you go Vac you won't turn back :)
They're also good for holding odd shapes
Video showing method to hold odd shapes *LINK*
Re: You don't need a vacuum pump......
Let's get them to advertise
Feel free to show them photos of my clocks. *NM*
Re: Let's get them to advertise
Re: Draining compressor tank
older craftsman 12" lathe ?????
Manual at Sears Parts Direct *LINK*
Re: older craftsman 12" lathe ????? *LINK*
Re: older craftsman 12" lathe ?????
Re: older craftsman 12" lathe ?????
Thanks for the info and advice
My tube Crapsman lathe did not have a taper
Rigid vs Ridgid
That was my first lathe many years and .....
Re: That was my first lathe many years and .....
Re: older craftsman 12" lathe ?????
Forum response falling behind.
Re: Forum response falling behind.
Re: Forum response falling behind.
Re: Forum response falling behind.
Re: Forum response falling behind.
Re: Forum response falling behind.
Re: Forum response falling behind.
Another Sphere Jig Thread
Re: Another Sphere Jig Thread
Re: Another Sphere Jig Thread
Here's one turned without a jig
Re: Got them from KLockit
Re: Got them from KLockit *LINK*
Re: Got them from KLockit
Re: clock group
removing ca stain with acetone?
Re: removing ca stain with acetone?
Re: removing ca stain with acetone?
Re: removing ca stain with acetone?
Re: removing ca stain with acetone?
Re: removing ca stain with acetone?
Re: removing ca stain with acetone?
Re: removing ca stain with acetone?
sanding sealer
Test first
Re: removing ca stain with acetone?
Re: removing ca stain with acetone?
Re: removing ca stain with acetone?
76 77 78 79 80 81 82
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081