Messages

Subject:
Re: Shellac Washcoat- more than 1?

Howie
Tom a washcoat or seal coat is usually one coat. I use shellac almost exclusively and I brush on a 1 1/2 pound cut, sand with 220 or 320 and then go on with the rest of the finishing stages. I could see possibly needing two coats if the piece was stained and you were concerned about cutting through to the color layer.

Messages In This Thread

Shellac Washcoat- more than 1?
Indeed yes....
Re: Indeed yes....
Re: Shellac Washcoat- more than 1?
Re: Shellac Washcoat- more than 1?
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081