5 6 7 8 9 10 11

Messages

Message Index

Quality hinge question BOX Makers?
Re: Quality hinge question BOX Makers?
Re: Quality hinge question BOX Makers?
FWIW -Ace Hardware
Re: Quality hinge question BOX Makers?
Full Extension drawer slides -- 38+" length
Re: Full Extension drawer slides -- 38+" length
Re: Full Extension drawer slides -- 38+" length
Since 1/4" plywood is less than 1/4" thick
Re: DrawerFloors
Re: Full Extension drawer slides -- 38+" length
Remember that if the drawers are 38" *PIC*
Re: band saw technique
Re: *** SURVEY: THE IDES OF MARCH ***
HaHaHa!
Re: ending WC
Re: A less than 1% question......
For anyone making a bed.....
Re: For anyone making a bed.....
Re: For anyone making a bed.....
Re: For anyone making a bed.....
Bed Bolts.....
Re: Bed Bolts.....
a socket wrench works just fine *NM*
Now you tell me *NM*
Haven't you done farm work
What I got out of growing up on a farm....
All things must pass
Re: All things must pass
Re: All things must pass
Re: All things must pass
Oxygen
Oxygen bars
Sawing veneer questions
Re: Sawing veneer questions
Re: Sawing veneer questions
Re: Sawing veneer questions
Thanks. I know I am on the right track now. *NM*
Re: Sawing veneer questions *PIC*
Re: Sawing veneer questions
You're welcome. Glad it helped! *NM*
At 3" wide, you can use the table saw
where can I get an aluminum fence with 3/4" T-slot
Re: where can I get an aluminum fence with 3/4" T-
Re: where can I get an aluminum fence with 3/4" T-
Re: where can I get an aluminum fence with 3/4" T-
Re: where can I get an aluminum fence with 3/4" T-
Re: where can I get an aluminum fence with 3/4" T-
Re: where can I get an aluminum fence with 3/4" T-
Re: where can I get an aluminum fence with 3/4" T-
Not clear enough
Re: Not clear enough
Re: Not clear enough - Pics?
Re: Not clear enough - Pics?
You just need a profile...
picture *PIC*
Re: picture
Re: picture
Fence on other side?
Re: Fence on other side?
Re: Fence on other side? OK
Try 80/20 extrusions
Re: Try 80/20 extrusions
Re: Try 80/20 extrusions
Re: Try 80/20 extrusions
Countersinks
Re: Countersinks
Re: ending WC
Re: ending WC
Re: I agree
They look nice!
I dunno...
Re: Bessey I Beam clamp.
Re: ending WC
Re: ending WC
An aside....
Re: Nothing wrong with electricity and oxygen
They can be quite influential when they want to be *NM*
Education Called For, Joe
Arts Crafts Bed Cover Fine WoodWorking ?
Re: Arts Crafts Bed Cover Fine WoodWorking ?
I keep saving up for a FD
I've used loose tenons for almost 35 years
go for it!
Re: Arts Crafts Bed Cover Fine WoodWorking ? *PIC*
Loose tenons are great *PIC*
Re: Loose tenons are great *PIC*
Re: Loose tenons are great
Compromises
Re: Compromises
Re: Loose tenons are great
Re: Arts Crafts Bed Cover Fine WoodWorking ?
Re: Arts Crafts Bed Cover Fine WoodWorking ?
Re: Arts Crafts Bed Cover Fine WoodWorking ?
good instincts
Re: good instincts
Re: good instincts
Re: good instincts
A BIG THANK-YOU Everyone
Re: Arts Crafts Bed Cover Fine WoodWorking ?
Some disclaimers
Those suggesting what Bill?
Now that is what is needed
Furniture vs cabinetry
Hire the gray.....
Do beards count? *PIC*
Wonderful video on the aging craftsman *LINK*
Thanks Dick ...
Re: Baileigh Morticing Machine
Is Your Bucket Half Full or Half Empty?
Thanks for the laugh.
Actual cost of doing business
5 6 7 8 9 10 11
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081