Hand Tools

Subject:
I agree with what you say...however....

Bill Tindall, E.Tn.
I gravitated to hand tools for other reasons.

It takes less skill and there is less risk removing 0.003" of wood with a hand plane from some place where a part is too big than trying to remove it with a table saw. For the most part my use of hand tools is for sizing and fitting parts.

In other cases the hand tool assisted approach is easier. For me, even drawers are easier when hand tool assisted, ie hand dovetailed. When I made drawers with a dovetail jig I sized the cabinet to some size of drawer that "fit the jig". That was a loosing strategy.

And finally, in cases the hand tool approach leads to a more long lasting construction. My case pieces are dovetailed together. No construction can be stronger or more self-squaring upon glue-up.

The bottom line of it is that hand tools lead to better results for some operations. And my granddaughter loves creating with the variety of shavings that are made :)

Messages In This Thread

first hand cut tails *PIC*
Re: first hand cut tails
Re: first hand cut tails
Re: first hand cut tails
Unsolicited suggestion
Success will be assured
Re: Success will be assured
are you missing a piece of essential equipment
Re: are you missing a piece of essential equipment
Re: are you missing a piece of essential equipment
Re: are you missing a piece of essential equipment
Kirby is how I started
Re: are you missing a piece of essential equipment
Advice, praise and learning curves
Re: Advice, praise and learning curves
Re: Advice, praise and learning curves
Re: Advice, praise and learning curves
Re: Advice, praise and learning curves
Re: Advice, praise and learning curves
Art, fine art, and utter messes....
I agree with what you say...however....
Re: Art, fine art, and utter messes....
Re: Peter Follansbee... *LINK*
You missed the point
Re: You missed the point
Beauty is as beauty does (in my case)
Re: Beauty is as beauty does (in my case)
my experience with the schools..
Re: Beauty is as beauty does (in my case)
Flawed
Re: Flawed
I don't buy it...
Re: I don't buy it...
My situation was unique I think...
Is there a psychologist in the house?
The outer frame; the border. *NM*
Thanks for playing, Wiley :) *NM*
I don't think it matters...
The kids...
Re: The kids...
Re: Is there a psychologist in the house?
I'm waiting for...
Correct.
Where to start a 1000 piece jigsaw puzzle...
Where do you start a 1000-piece puzzle?
Re: Flawed
said better than I did *NM*
Re: Flawed
Re: Unsolicited suggestion
Re: Unsolicited suggestion
Re: Unsolicited suggestion
Re: Unsolicited suggestion
Re: Unsolicited suggestion--Stud Mills?
Re: Unsolicited suggestion--Stud Mills?
Re: Unsolicited suggestion
I don't do a lot of dovetails...
You provided some sage advice *PIC*
Re: I don't do a lot of dovetails...
yeah...
Re: Form Follows Catches :D
Skew chisel *PIC*
Re: Skew chisel
I did my first ones in oak... *PIC*
just read bill's later post..
Re: I did my first ones in oak...
Re: I did my first ones in oak...
Slicks and makers
Re: Slicks and makers *PIC*
Re: Slicks and makers
Slicks and makers
Re: Slicks and makers
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081