Hand Tools

Subject:
one more follow-up comment.
Response To:
initial fitting... ()

David Weaver
I don't need any more planes and have sold off a bunch in the last two years.

I've fancied rosewood jack planes, but the boat builders planes are often pretty ugly to start and beaten heavily.

Rosewood billets are cheap right now and the cost to make planes out of it is actually the same or less than horizon's quartered beech. The density of plantation rosewood is not that high, only slightly heavier than beech. It can be more musical, but so can cocobolo, and the cocobolo plane in the prior post is a treat to use if it's set heavy. Less abusive than a beech plane of the same thing.

I've had these two billets for a while, they're not straight enough for any parts on a guitar (visually), but the back one is pretty good. The front one is terrible, but I"ll keep that one for me and throw it away if it moves around.

(for what it's worth, the English planes that I've gotten have all been somewhere around my preferred weight range, with the jacks maybe slightly lighter. once in a while, I get a plane that someone must've intentionally filled over and over with linseed oil - they must've had a want, but I don't know what it was. One of the mid-length planes that I got early on had a hancock iron - I think it was an american plane - and was 9 1/2 pounds at 20 inches long. Horrible)

My distaste for coffin smoothers isn't shared (more than one person has told me how much they love them), it's just a personal opinion. I much prefer the infill coffin planes to the wooden ones.

Messages In This Thread

Light vs Heavy planes
Re: Light vs Heavy planes
Re: Light vs Heavy planes
Re: Light vs Heavy planes
Re: Light vs Heavy planes
not the direction I went *PIC*
5 1/4
Re: reframing the issue
Re: reframing the issue
Friction, and more
The experiment and conclusion are both confusing
Re: Heavy and light
The best case for heavy planes...
another factor
If you're trimming furniture...
At some point..
Inertia and figured wood
Re: Jim, what is Osae-gani? *NM*
Osae-gani
Re: Osae-gani
Note on fitting
Re:wedge fitting
funny...
Re: funny...
Re:wedge fitting
biases for the maker...
Re: Light vs Heavy planes
Re: Light vs Heavy planes
Not a positive contribution to the discussion
Re: Light vs Heavy planes
finding out who to listen to...
Re: Same
Old history
Shops using mostly hand tools..
Re: Shops using mostly hand tools..
Don felder's guitar...
Misprint?
cultural thing...
Re: Misprint?
Re: finding out who to listen to...
I agree...
Re: finding out who to listen to...
Turnover, newbies and FAQ
comment on teaching
If you get my drift...
Re: Light vs Heavy planes
new vs. old planes...
I like tools from Brooklyn
Re: I like tools from Brooklyn *NM*
Infills in the UK
I'm glad you commented.
Note on a modern infill
konrad's planes...
Re: I'm glad you commented.
what I've found...
Re: what I've found...
interesting that...
Re: Calling BS
I haven't seen it....
Re: I haven't seen it....
Re: I haven't seen it....
Re: I haven't seen it....
Re: I haven't seen it....
Truing Kanna
expanding on what jim said
Re: expanding on what jim said
Re: expanding on what jim said
Coupla thoughts
different methods of lapping and the bump
Re: Calling BS
Re: Facts, not assertions
Re: Facts, not assertions
I think we're agreeing...
Re: I think we're agreeing...
Re: Me too
Wood isn't indefinitely stable, either
Re: Calling BS
Re: Calling BS
Re: Calling BS
by the early 19th century
Re: by the early 19th century
It's not offered as ball court...
I miss Todd Hughes' contributions too *NM*
Re: It's not offered as ball court...
I'm guessing on parts here...
Re: Can't argue
Weight Comparison
more infill weights
Re: more infill weights
now there is a pearl of wisdom
Re: more infill weights
initial fitting...
one more follow-up comment.
Re: one more follow-up comment.
rosewood
Re: rosewood
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081