Hand Tools

Subject:
Re: finding out who to listen to...

Wiley Horne
My experience....Like David, I have learned from experience to heed Warren. But here’s the thing: Warren doesn’t write a cookbook for you. He gives you—usually in one sentence—the clue or the observation you need. He gives you a course correction, but you still have to do the work of thinking. One time, I was struggling with a satinwood project where I was using a lot of shop sawn veneer to stretch the limited supply of quartered wood I had. Somewhere in that sequence, Warren said ‘use solid wood’. At the time, I thought that wasn’t very helpful. But I had pure hell with that project, and in the end I was left with the unforgettable conviction that Warren was right. Another time, more recently, I was showing the result of some double-iron planing with different setbacks. Warren commented, just from the phone camera photos, that one of the planes had its cap iron too close and was dulling the surface. He did this in 4-5 words, and it was a great help to me and an insight about reading the surface (I was mainly looking for tearout) that I had missed. Immensely valuable, and I haven't forgotten. There are other examples, but those will do.

It reminds me a little of Krenov. If you’re trying to build a particular Krenov project from his book, you won’t find steps 1, 2, 3....But it’s all there—you just have to search for the clues, and do some thinking about it.

So. My experience is that Warren’s posts have given me deeply valuable info in a few words and no explication. I listen now.

Wiley

Messages In This Thread

Light vs Heavy planes
Re: Light vs Heavy planes
Re: Light vs Heavy planes
Re: Light vs Heavy planes
Re: Light vs Heavy planes
not the direction I went *PIC*
5 1/4
Re: reframing the issue
Re: reframing the issue
Friction, and more
The experiment and conclusion are both confusing
Re: Heavy and light
The best case for heavy planes...
another factor
If you're trimming furniture...
At some point..
Inertia and figured wood
Re: Jim, what is Osae-gani? *NM*
Osae-gani
Re: Osae-gani
Note on fitting
Re:wedge fitting
funny...
Re: funny...
Re:wedge fitting
biases for the maker...
Re: Light vs Heavy planes
Re: Light vs Heavy planes
Not a positive contribution to the discussion
Re: Light vs Heavy planes
finding out who to listen to...
Re: Same
Old history
Shops using mostly hand tools..
Re: Shops using mostly hand tools..
Don felder's guitar...
Misprint?
cultural thing...
Re: Misprint?
Re: finding out who to listen to...
I agree...
Re: finding out who to listen to...
Turnover, newbies and FAQ
comment on teaching
If you get my drift...
Re: Light vs Heavy planes
new vs. old planes...
I like tools from Brooklyn
Re: I like tools from Brooklyn *NM*
Infills in the UK
I'm glad you commented.
Note on a modern infill
konrad's planes...
Re: I'm glad you commented.
what I've found...
Re: what I've found...
interesting that...
Re: Calling BS
I haven't seen it....
Re: I haven't seen it....
Re: I haven't seen it....
Re: I haven't seen it....
Re: I haven't seen it....
Truing Kanna
expanding on what jim said
Re: expanding on what jim said
Re: expanding on what jim said
Coupla thoughts
different methods of lapping and the bump
Re: Calling BS
Re: Facts, not assertions
Re: Facts, not assertions
I think we're agreeing...
Re: I think we're agreeing...
Re: Me too
Wood isn't indefinitely stable, either
Re: Calling BS
Re: Calling BS
Re: Calling BS
by the early 19th century
Re: by the early 19th century
It's not offered as ball court...
I miss Todd Hughes' contributions too *NM*
Re: It's not offered as ball court...
I'm guessing on parts here...
Re: Can't argue
Weight Comparison
more infill weights
Re: more infill weights
now there is a pearl of wisdom
Re: more infill weights
initial fitting...
one more follow-up comment.
Re: one more follow-up comment.
rosewood
Re: rosewood
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081