Hand Tools

Subject:
Re:wedge fitting
Response To:
Note on fitting ()

Steve Voigt
Wiley, I recall you mentioning this before. My experience is that it's fine if the wedge/iron interface is "sprung" because one or both is concave. Double irons will always be that way, by default. But if the front of the wedge (or the mating abutment) is concave, it seems to contribute to the condition in which the iron jumps or shifts downward when the wedge is seated. That's annoying because then you have to go back and forth between seating the wedge and retracting the iron until you get it right. I try to dial in the fit so that the abutments are imprinting on the wedge along their full length. Doesn't have to be 100% but I try to get as close as possible.

Messages In This Thread

Light vs Heavy planes
Re: Light vs Heavy planes
Re: Light vs Heavy planes
Re: Light vs Heavy planes
Re: Light vs Heavy planes
not the direction I went *PIC*
5 1/4
Re: reframing the issue
Re: reframing the issue
Friction, and more
The experiment and conclusion are both confusing
Re: Heavy and light
The best case for heavy planes...
another factor
If you're trimming furniture...
At some point..
Inertia and figured wood
Re: Jim, what is Osae-gani? *NM*
Osae-gani
Re: Osae-gani
Note on fitting
Re:wedge fitting
funny...
Re: funny...
Re:wedge fitting
biases for the maker...
Re: Light vs Heavy planes
Re: Light vs Heavy planes
Not a positive contribution to the discussion
Re: Light vs Heavy planes
finding out who to listen to...
Re: Same
Old history
Shops using mostly hand tools..
Re: Shops using mostly hand tools..
Don felder's guitar...
Misprint?
cultural thing...
Re: Misprint?
Re: finding out who to listen to...
I agree...
Re: finding out who to listen to...
Turnover, newbies and FAQ
comment on teaching
If you get my drift...
Re: Light vs Heavy planes
new vs. old planes...
I like tools from Brooklyn
Re: I like tools from Brooklyn *NM*
Infills in the UK
I'm glad you commented.
Note on a modern infill
konrad's planes...
Re: I'm glad you commented.
what I've found...
Re: what I've found...
interesting that...
Re: Calling BS
I haven't seen it....
Re: I haven't seen it....
Re: I haven't seen it....
Re: I haven't seen it....
Re: I haven't seen it....
Truing Kanna
expanding on what jim said
Re: expanding on what jim said
Re: expanding on what jim said
Coupla thoughts
different methods of lapping and the bump
Re: Calling BS
Re: Facts, not assertions
Re: Facts, not assertions
I think we're agreeing...
Re: I think we're agreeing...
Re: Me too
Wood isn't indefinitely stable, either
Re: Calling BS
Re: Calling BS
Re: Calling BS
by the early 19th century
Re: by the early 19th century
It's not offered as ball court...
I miss Todd Hughes' contributions too *NM*
Re: It's not offered as ball court...
I'm guessing on parts here...
Re: Can't argue
Weight Comparison
more infill weights
Re: more infill weights
now there is a pearl of wisdom
Re: more infill weights
initial fitting...
one more follow-up comment.
Re: one more follow-up comment.
rosewood
Re: rosewood
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081