Hand Tools

Subject:
Re: Stearate coating
Response To:
Re: Stearate coating ()

Patrick Chase
I should be clear that I use diamond plates (mostly Atoma) for the vast majority of stone-flattening chores. As you say they get the job done quickly and at least as cleanly as any other option.

Unfortunately I own some stones that can't be allowed to interact with a diamond plate. For example, I stripped almost all of the diamonds off of a 10" x 4" DiaFlat (a $200 plate...) by using it to true up a Sigma Select II #240. I expect that I'd see similar results with coarse SiC-based stones like a Crystolon or my Sigma #120.

I use a well-worm Atoma #140 plate to flatten stones down to #320 or so, but below that I switch to loose SiC grit. It's almost as fast as a diamond plate once you have the hang of it (and figure out some tricks like using sacrificial plastic laminating sheets to "hold" the grit), though it makes a god-awful mess.

Messages In This Thread

flattening Waterstones- shapton pro
Re: flattening Waterstones- shapton pro
Re: flattening Waterstones- shapton pro
Re: flattening Waterstones- shapton pro
Re: flattening Waterstones- shapton pro
Flattening
Revise atoma price...
Re: Revise dia-sharp price...
Diamond plates
Re: Diamond plates
Diamond plates......
Re: diasharp vs. diaflat
Re: diasharp vs. diaflat
Re: I think...
Re: I think...
Re: flattening Waterstones- shapton pro
Yes, this
lapping film?
Re: lapping film?
Re: lapping film?
you are not kidding!
Re: lapping film?
A different perspective *LINK*
Re: A different perspective
Not universal preference
to date
Re: to date
Re: to date
Re: to date
Re: to date
:) *NM*
Re: to date
Re: A different perspective
My Opinion...
Re: My Opinion...
My thoughts
Re: My thoughts
Re: My thoughts
The flat wheel surface - or not..
Re: The flat wheel surface - or not..
Re: The flat wheel surface - or not..
Re: The flat wheel surface - or not..
CBN and grit
How Are You Cleaning The CBN Wheel . . .
Re: How Are You Cleaning The CBN Wheel . . .
Re: How Are You Cleaning The CBN Wheel . . .
Why grind unhardened steel on CBN?
Re: Why grind unhardened steel on CBN?
Re: How Are You Cleaning The CBN Wheel . . .
Re: A different perspective
Re: flattening Waterstones- shapton pro
Quick and dirty summary:
Re: Quick and dirty summary:
Atoma - $64
Re: Atoma - $64
Sandpaper Flattening & Shaptons
Re: Sandpaper Flattening & Shaptons
Re: Sandpaper Flattening & Shaptons
Re: Sandpaper Flattening & Shaptons
Stearate coating
Re: Stearate coating
Re: Stearate coating
Re: Stearate coating
Plastic laminating sheet
Re: Stearate coating
which side to use?
Re: which side to use?
Re: which side to use?
Re: which side to use?
a little bit the Indian and a little bit arrow
Re: a little bit the Indian and a little bit arrow
What a great thread this has been.....
Re: What a great thread this has been.....
Re: What a great thread this has been.....
Re: What a great thread this has been.....
Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method *LINK* *PIC*
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
Re: Traditional Method
My apologies for being a bit too harsh..
Re: Washita vs soft Arkansas stones...
Re: Washita vs soft Arkansas stones...
Re: Washita vs soft Arkansas stones...
Re: Washita vs soft Arkansas stones...
well then....
Another possibility presents itself......
CBN plates
Re: Not making sense..
Diamond wear
Re: Diamond wear
Re: Diamond wear
Re: Diamond wear
Re: Not making sense..
Re: Not making sense..
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081