Hand Tools

Message Index

strop only uni

Re: How much is enough

Once you've done the buffer, you can...

Finish on Cast iron substrate for diamonds

cast plates...

Angle?

about 45 degrees

more cake *PIC*

Re: strop only uni "yellowcake" & leather question

yellow compound product number

Re: strop only uni "yellowcake" & leather question

Why the interest in Strop-Only Unicorning?

strop vs. freehand

Unicorn takes first loss- feet planed

Re: Unicorn takes first loss- feet planed

yes, but...

correction and elaboration of back buffing

I can do a duration and feel ...

Factors PPA cares about

as to the bright surface...

One last one - xhp planing rosewood...

one other picture...terminal shavings

Plinth design ideas

Re: Plinth design ideas

Middle stone

Re: Middle stone

Re: Middle stone

Re: Middle stone

Re: Middle stone

Re: Middle stone

Sigma 6000 Power

shapton 5k

Re: shapton 5k

The progressions...

Re: soaking

That and context

Re: The progressions...

interesting!!

Re: Middle stone

Video about using a buffer for sharpening

Re: Video about using a buffer for sharpening

Excellent, excellent video!! *NM*

Thanks, making it was a learning experience! *NM*

Re: Video about using a buffer for sharpening

My suggestion.....

Strop

Re: Strop

for some kind of buffing...

Re: Strop

two approaches

Thanks Winston. Very well done! *NM*

Absolutely superb, Winston!! *NM*

a video so well done..

needs reposting main board *NM*

Excellent video Winston, I might add one note,

Ax edges

Yes on files...

Thanks David and Bill, *LINK*

Great Video - Left a Burnniing Question

Re: Great Video - Left a Burnniing Question

Re: Great Video - Left a Burnniing Question

Eventually becomes an irrelevant question

Re: Eventually becomes an irrelevant question

Moxon vise *PIC*

how do the clamps work?

Re: how do the clamps work?

interesting. Thanks! *NM*

Unicorn for plane blades *LINK*

long video, so...

Re: long video, so...

Re: long video, so...

Re: long video, so...

Re: long video, so...

Cr-Mn vs. Cr-V chisels *PIC*

Re: Cr-Mn vs. Cr-V chisels *PIC*

Re: Cr-Mn vs. Cr-V chisels

Schlieper *LINK*

felt wheels in the background!!

They are essentially identical

Thanks! *NM*

Re: Cr-Mn vs. Cr-V chisels

I've looked these up before...

Re: I've looked these up before...

If the alloy is different...

Note on Pfeil

The missing variable...

Re: Note on Pfeil

Thanks Warren. *NM*

Variables that change for chinese tools

Result: not good *PIC*

same experience

* ahem *

I'll take "Pop culture references"

farting through silk...

Agree...

More than one reason to buff the edge

I remember the tormek thing...

Re: Agree...

I was wrong about damage... *PIC*

Still bad after grinding it back *PIC*

it could be deeper...

Life’s too short

but something for nothing.... *PIC*

Yabbut

The most sensible conclusion...

Well,

Re: but something for nothing....

objective tests don't count

Heat treating

They overshot...

Unicorn knife edges

Re: Unicorn knife edges

Re: Unicorn knife edges

Re: Unicorn knife edges

George should be....

i made a video - I'll post it. *NM*

Re: i made a video - I'll post it.

I could....

Re: I could....

When your videos are so bad...

Re: When your videos are so bad...

CCR, if it wasn't licensed! *NM*

Re: CCR, if it wasn't licensed!

Re: CCR, if it wasn't licensed!

could be...

Re: could be...

It's not a particularly great video...

Re: Unicorn knife edges

paper and felt and leather

I'd not tried a chisel before...

I have been doing it routinely

Re: Unicorn knife edges

Side comment about the buck knives...

Unicorn Party Tricks...Planing

Re: Unicorn Party Tricks...Planing

Re: Unicorn Party Tricks...Planing

Oooo....

Re: Unicorn Party Tricks...Planing

Re: Wood ideas for Monticello book presses

There is a Lowes

Re: Wood ideas for Monticello book presses

read only the first post...

Poplar

Mortise technique

How to tie shoes...

Re: How to tie shoes...

passive aggressive....

Re: passive aggressive....

Re: passive aggressive....

Moxon

Difference for Cabinetmaking

Re: Moxon

Roubo *PIC*

Re: Roubo

Riding the bevel

Re: Riding the bevel

Re: Riding the bevel

Re: Riding the bevel

Re: Riding the bevel

Re: Terminology?

Folsanbee central ‘V’

Re: same geometry, different approach

Re: same geometry, different approach

Agree with John

Re: furniture mortises vs plane mortises etc

Re: furniture mortises vs plane mortises etc

incannel gouges

Re: incannel gouges

Re: incannel gouges

Re: incannel gouges

Re: incannel gouges

Re: incannel gouges

From Steve’s post just below:

guessing at efficiency..

Re: guessing at efficiency..

Re: furniture mortises vs plane mortises etc

Re: furniture mortises vs plane mortises etc *PIC*

Re: Terminology?

The flip...

Re: Terminology? *PIC*

P. S. With appreciation to Winston Chang

Photo resizer app

Re: Terminology?

Re: Terminology?

Re: Roubo

Re: Mortise technique

Re: Mortise technique

George Wilson would approve...

What mattered to clients...

Re: Mortise technique

Re: Factory?

Another nifty behavior from pigstickers

Re: Mortise technique - an observation...

your observations are correct...

Making deep mortises and paying attention

Re: Making deep mortises and paying attention

hah!!! *NM*

Re: Making deep mortises and paying attention

Re: Mortise technique

Re: I would add....

Reading some avid turners...

Wide boards beside poplar and pine?

Unicorn content

Making (wider) panels

wider panels, match planing, & spring joints

Re: wider panels, match planing, & spring joints

Things that weren't obvious (to me)

Reputable Dealers

Re: Reputable Dealers

Selling shirts would defray research expenses

Re: Selling shirts would defray research expenses

The tip of the horn

Couldn't resist... *PIC*

Re: The club tshirt

I love...

Re: I love...

Re: It's a spoof name...

Re: It's a spoof name...

I voted (elsewhere)

Re: I voted (elsewhere)

It was a fanclub...

I divide my time... *PIC*

Re: I divide my time...

I think it's a fractured bunch of stuff...

Re: I think it's a fractured bunch of stuff...

Re: I think it's a fractured bunch of stuff... *LINK* *PIC*

Re: I think it's a fractured bunch of stuff...

Re: I think it's a fractured bunch of stuff...

Re: I think it's a fractured bunch of stuff...

Re: I think it's a fractured bunch of stuff...

Re: I think it's a fractured bunch of stuff...

Re: I think it's a fractured bunch of stuff...

Re: I think it's a fractured bunch of stuff...

Desk put into service *PIC*

Re: Desk put into service

revealing the ash holes for you *PIC*

Thanks. Looks nice! *NM*

Re: Desk put into service

Re: Desk put into service

Re: Desk put into service

Beautiful! Love the Ash *NM*

Re: Desk put into service

Whatchoo talking out, Willis?

Re: Desk put into service

Re: Very nice Bill! *NM*

Re: Desk put into service

Re: Desk put into service

Re: Desk put into service

no chance

I had this 'splained to me when starting out...

Re: I had this 'splained to me when starting out..

A sufficiently advanced technology...

Re: A sufficiently advanced technology...

Re: Desk put into service

Re: Desk put into service

Re: Desk put into service