Downsizing shop, north Georgia

T Daniel
>I need space, bring a truck. Here are a few of the things that must go:
Like new Delta cabinet saw, 3 hp table extension and 50" Biesmeyer fence $950 saw is about 7 years old but used little
24" planer....oldie but real goodie...Porter, weighs about 2500 lbs $1250. Planer is 3 ph but I have an inverter that I will include for another $400.
Scroll saw, variable speed floor model. Made or sold by Shopsmith but this is actually a good tool. $350
Lathe Vicmarc VL100 with bed $450
Interior shop walls, insulated, 2" styrofoam core with 1/2" sheetrock that is covered with vinyl. I have the bolt together posts up to 20 ft long but they can easily be cut to a shorter length, sheets are 4 ft x 8 ft each and weight 120 lbs per sheet.
More stuff available. If you need a truck and trailer to haul it off in, I have that too.

Messages In This Thread

Downsizing shop, north Georgia
Re: Downsizing shop, north Georgia
I have a Kelton
Re: I have a Kelton
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.