Classifieds

Subject:
FS: PSI Dust Collector *PIC*

Terre Hooks
I am in the Atlanta area, but often in the north Alabama, north GA, south GA (Macon/Perry/etc) area. See below for additional location/travel info.

This has a Wynn filter on it and a clear bag. I believe I have a new clear bag, if I find it, it's yours also; But I've been using this one bag since the beginning. No, the Wynn filter doesn't have the cleaning flapper, there is a website or two out there showing a conversion to implement that. I have not had a serious problem with it, I will occasionally knock on it with a rubber hammer and let the dust settle. Used frequently, I would take it off every 3 to 6 months and vac it out with a shop vac and brush fitting.

It is currently wired for 240v use, it can be converted back to 120v. It works fine on a 120v circuit. It has a 7" (IIRC) outlet on the fan housing flange and comes with the 2x4" hose fitting.

I also have a Veritas (Lee Valley) trash can separator for 4" hoses and it works great. It really saves having to remove the bag and empty it.

$200 for the PSI Dust collector
$25 for the separator lid

As far as delivery/pick up/etc- I am flexible and will work something out with you as far as delivery or meeting somewhere. I travel a little bit and could possibly work something in. If you are in the GA, AL, eastern TN, western NC or SC, we could probably work something out.

Email me at tdhooks@gmail.com

© 1998 - 2010 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081