Turning Archive 2006

Subject:
Padauk vase *PIC*

HeatherA in Anchorage, AK
>Hello, I made this little vase / weedpot for my manager at work. I made several others for my co-workers out of maple but I wanted something a little different for my boss. I have never turned wood that had such large pores. I sealed it with CA and after I could see again I finished it with a mixture of BLO and bulls eye sealcoat then renaissance wax. I sealed the hole with thin CA so it can be used for live flowers and a little water. Size is 3"x1 3/4". Comments welcome, esp. on the shape. I am still working this all out.

Thanks,
Heather

Messages In This Thread

Padauk vase *PIC*
Re: Padauk vase
Re: Padauk vase
Re: Padauk vase
Re: Padauk vase
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081