Turning Archive 2006

Subject:
Wood lathe handles

Mike Hunter
>Does anyone know a good source for wood lathe handles? I have a need for approximently 200 pcs of high quality (ash preferred) lathe handles with ferrale. Preferred length is 17" OAL, but 12" to 15" will work. If possible, I would like to have 100 with a 3/8 hole drilled in one end and then 100 with a 1/2" drilled hole. The hole depth should be about 2 1/4 inches.

Messages In This Thread

Wood lathe handles
Re: Wood lathe handles
© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081