Turning Archive 2005

Subject:
Table legs needed

Marty - Plainfield, IL
>It was suggested that I post over here.

I need four legs for a christmas present. Below are the details. The design below is perfect for this project. It figures that I get a call today from the company telling me their out of stock. Pretty much no chance of getting them before x-mas. Let alone finishing the project.

I have tried all the major sites I can find and found similar legs, but most would need modifications (too tall) to work.

Has to be maple. Should be 18" tall.

http://tablelegs.com/sheratontablelegs.htm#304new

Stretcher Block Coffee
This versatile leg will give your project visual interest at the floor. Use the stretcher block to support an H-stretcher, a box stretcher or even a handy shelf. Recommended top thickness is 3/4" with about a 3" overhang.
Available as a Table Base Kit Dim.: 18" H x 2 1/4", 5" upper post, 3" lower post 2 1/2" from floor
Edit/Delete Message

© 1998 - 2017 by Ellis Walentine. All rights reserved.
No parts of this web site may be reproduced in any form or by
any means without the written permission of the publisher.

WOODCENTRAL, P.O. BOX 493, SPRINGTOWN, PA 18081